Description
Amazon is seeking an Electrical Installation Lead - Low Voltage Devices & Controls to drive the successful installation, configuration, and validation of field devices and low-voltage control systems for automation and material handling equipment across multiple greenfield and brownfield fulfillment center sites. This role provides field-based technical leadership focused specifically on low-voltage device installation, sensor deployment, VFD configuration, E-stop systems, fieldbus cabling, and device commissioning readiness. The Electrical Installation Lead - Low Voltage Devices & Controls will directly manage installation crews responsible for all field device mounting, wiring, configuration, and validation on MHE systems. This includes photo eyes, proximity sensors, encoders, limit switches, E-stop devices, pull cords, safety devices, scanners, VFDs, I/O blocks, zone controllers, actuators, operator stations, stack lights, and industrial communication/fieldbus cabling (Ethernet/IP, Profinet, EtherCAT, AS-i). You will ensure all devices are installed correctly, parameters are set accurately, and systems are ready for controls commissioning and system energization. This role reports to the Site Deployment Manager and follows the Power Distribution & Infrastructure lead through each zone - your team mobilizes once conduit, panels, and heavy wire are in place. You are the last electrical installation step before controls commissioning, making precision, attention to detail, and commissioning readiness the defining measures of success.
Note: Candidate can sit out of any Amazon location in the US.
Key job responsibilities
Device Installation Leadership:
Lead and manage electrical installation crews focused on low-voltage device
installation and configuration for MHE systems across North American facilities
Direct installation of field devices including photo eyes, proximity sensors, encoders, limit switches, E-stop devices, pull cords, safety devices, and barcode
scanners
Oversee VFD installation, mounting, power connections, and control wiring
Manage I/O block installation, wiring, and terminal connections per I/O lists and wiring diagrams
Direct installation of zone controllers, actuators, operator stations, and stack lights
Oversee E-stop cable system installation including cable runs, tensioning, I-bolt and pulley placement, and pull cord routing
Manage sensor mounting, orientation, and alignment to ensure proper detection coverage
Direct 24VDC control circuit wiring, device terminations, and panel-to-device connections
Oversee fieldbus and industrial communication cabling installation (Ethernet/IP, Profinet, EtherCAT, AS-i) with attention to routing, labeling, addressing, and termination quality
Configuration, Commissioning Readiness & QC:
Manage parameter setting and programming for all field devices including dip switches, photo eye training, sensor calibration, and VFD configuration
Oversee match-mark cable connections to verify correct device-to-panel wiring
Lead electrical QC activities including I/O verification - checking for shorts, breaks,
stretched wires, and confirming wire labels match drawings
Manage E-stop system testing and verification across all installed zones
Verify sensor functionality, detection ranges, and operational parameters before handoff to controls commissioning
Oversee side cover installation on completed conveyor sections
Manage electrical device punchlist identification and repair
Partner with controls commissioning team to validate system readiness for energization
Ensure cable management, wire labeling, and device labeling meet standards before zone closeout
Technical Leadership & Standards:
Provide technical expertise for low-voltage control systems, 24VDC circuits, field devices, and industrial communication networks
Review and interpret device layout drawings, I/O lists, wiring diagrams, control panel drawings, and fieldbus addressing schedules
Follow and help develop device installation standards and best practices
Create and maintain technical documentation including device installation SOPs, configuration checklists, and QC verification procedures
Identify, troubleshoot, and resolve device installation issues that may impact commissioning readiness or system functionality
Support development of scalable installation practices and field standards across multiple sites
Recommend and implement process improvements to increase device installation
efficiency and first-pass quality
Coordination & Communication:
Coordinate device installation activities with power distribution teams, mechanical
installation, controls engineering, IT/network teams, and vendors
Manage zone sequencing with the Power Distribution & Infrastructure lead -
device installation begins once conduit, panels, and wire are in place
Coordinate with controls commissioning on energization readiness, I/O verification results, and open items
Track device installation progress, risks, blockers, and quality issues, escalating when support is needed
Participate in project-level technical reviews, installation readiness reviews, and
commissioning readiness reviews
Manage relationships with device vendors, OEMs, integrators, and internal project stakeholders
Participate in daily business reviews with installation progress and commissioning
readiness updates
Maintain accurate field documentation including punch lists, issue logs, QC observations, and turnover documentation
A day in the life
Your day starts at the site coordination meeting where you review which zones have completed power infrastructure installation and are ready for device mobilization. You walk the floor with your device crew - verifying photo eye mounting positions against device layout drawings, checking sensor orientation and alignment, and confirming that I/O blocks are properly wired to the correct panel terminals. You oversee VFD installation
and verify that dip switches and parameter settings match the configuration schedule. You check E-stop cable installation - verifying proper tension, I-bolt placement, and pull cord routing meets Amazon safety standards. Mid-day you inspect fieldbus cabling installations, verifying Ethernet/IP or Profinet routing, cable labeling, addressing, and
termination quality. By afternoon, you're working with your QC crew to validate I/O verification results - checking for shorts, verifying wire labels match drawings, confirming sensor functionality, and ensuring side cover installations are complete. You coordinate with the controls commissioning team on upcoming energization zones and
close out at the daily business review with readiness status and any open items.
About the team
The OMHS Installation & Deployment team supports the deployment and integration of automation and material handling systems across Amazon's operations network. The team works cross-functionally with engineering, construction, operations, supply chain, vendors, and field execution partners to deliver safe, scalable, and reliable systems.
Basic Qualifications
Experience in engineering including a supervisory role managing people
Experience in a fast-paced, automated, industrial, logistics, production or manufacturing environment
5+ years of experience in industrial electrical installation, controls installation, automation deployment, or a similar technical environment
Experience leading or supervising electrical device installation crews, controls technicians, or field execution teams Experience reading and interpreting device layout drawings, I/O lists, wiring diagrams, and control panel drawings
Experience with low-voltage control systems including 24VDC circuits, field devices, sensors, VFDs, and industrial communication networks
Experience working in fast-paced industrial, logistics, manufacturing, or automation environments
Ability to travel up to 50% domestically; travel may exceed 50% in some instances with short notice
Preferred Qualifications
Prior experience managing controls technicians, instrumentation technicians,
device installers, or low-voltage electricians
Prior experience working for a material handling integrator
Prior experience installing devices and sensors for conveyor or sortation systems
Experience with PLC I/O systems, fieldbus networks (Ethernet/IP, Profinet,
EtherCAT, AS-i), and industrial communication infrastructure
Experience with VFD configuration, motor parameter setting, and drive
commissioning
Experience with E-stop systems, safety device installation, and safety circuit
validation
Knowledge of AutoCAD Electrical, Bluebeam, BIM 360, or equivalent drawing
review software
Experience coordinating device installation with controls commissioning and PLC
teams
Experience with punch list management, I/O verification procedures, and turnover
documentation
Lean, Six Sigma, PMP, or related technical/project management certifications
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company's reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at https://amazon.jobs/en/benefits .
USA, AZ, Phoenix - 91,800.00 - 137,700.00 USD annually
USA, CA, San Diego - 91,800.00 - 137,700.00 USD annually
USA, FL, MIAMI - 91,800.00 - 137,700.00 USD annually
USA, FL, Miami - 91,800.00 - 137,700.00 USD annually
USA, KY, Hebron - 91,800.00 - 137,700.00 USD annually
USA, MA, North Reading - 91,800.00 - 137,700.00 USD annually
USA, MI, Caledonia - 91,800.00 - 137,700.00 USD annually
USA, TN, Nashville - 82,600.00 - 123,900.00 USD annually
USA, TX, Austin - 91,800.00 - 137,700.00 USD annually
USA, VA, Arlington - 91,800.00 - 137,700.00 USD annually
USA, WA, Kent - 91,800.00 - 137,700.00 USD annually
