[UNION] Mobile Operating Engineer

Cushman & Wakefield • Chicago, IL • 2h ago

Job Title

Job Description Summary

The Mobile Engineer is responsible for providing efficient and reliable maintenance support across multiple commercial properties within the designated region. The role focuses on periodic property inspections, ensuring building systems are in optimal condition, and addressing minor repairs to maintain facility standards. The engineer will follow an assigned route and report issues requiring specialized services.

Job Description

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES - Perform all plumbing, electrical, or HVAC requirements of the building(s) - Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. - Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings - Verify field conditions and perform any necessary repairs or adjustments - Monitor Energy Management - Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property - Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.) - Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed. - Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris - Check for properly operating emergency exit signs and lights and ensure free and clear access

to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management - Document and report activities to supervisor - Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns - Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits - Complete all required C&W Safety Training as scheduled annually - Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours KEY COMPETENCIES - Technical Proficiency - Initiative - Flexibility - Multi-Tasking - Sense of Urgency IMPORTANT EDUCATION - Required to have certification as a Universal Technician for CFC

High School Diploma of GED Equivalent - Graduate of apprentice program or trade school preferred

IMPORTANT EXPERIENCE - 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting ADDITIONAL ELIGIBILITY QUALIFICATIONS - Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.) - Possess and maintain a valid driver's license and good driving record with periodic checks (where applicable) - Basic Computing Skills in Outlook, Excel & Word - Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.

Knowledgeable in energy management systems, techniques and operations. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime @type assignments); may require shift work and/or on call duties

Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job @type, business line, and applicability of collective bargaining agreements.

The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications.

The company will not pay less than minimum wage for this role.

The compensation for the position is: $42.25 - $49.70

Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any @type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email Accommodations@cushwake.com . Please refer to the job title and job location when you contact us.

INCO: "Cushman & Wakefield"

Similar Jobs

Manufacturing Engineer

Actalent • Lombard, IL • 6h ago

IT & Engineering

Job Description: Manufacturing Engineer As a Manufacturing Engineer, you will be responsible for researching, designing, and developing manufacturing processes that include production flow, assembly methods, and producti...

6h ago

Go to Apply

Sr. Solutions Architect, AWS Industries HCLS

Amazon • Chicago, IL • 12h ago

IT & Engineering

Description Application deadline: Apr 4, 2026 The AWS Industries team is committed to helping industry customers enable their digital transformation journeys. Our primary goal is to meet customers in their cloud journeys...

12h ago

Go to Apply

Senior Master Data Analyst

ASC Engineered Solutions • Oak Brook, IL • 14h ago

IT & Engineering

This job was posted by https://illinoisjoblink.illinois.gov : For more information, please see: https://illinoisjoblink.illinois.gov/jobs/13382098 \ Position Title: Senior Master Data Analyst\ Department: Operations &...

14h ago

Go to Apply

Entry-Level Engineer

International • Lisle, IL • 14h ago

IT & Engineering

Position Overview At International Motors, we're not just driving change in the transportation industry; we're pioneering a cleaner, more sustainable future where generations can thrive. This is an exhilarating time to j...

14h ago

Go to Apply

Sr. Design Engineer - Transmission Line

ENTRUST Solutions Group • Lisle, IL • 14h ago

IT & Engineering

Description About the Role: Join our dynamic team as a Senior Design Engineer, specializing in high voltage electric transmission lines and distribution. You will play a crucial role in designing and developing engineeri...

14h ago

Go to Apply

.Net Developer With React

TEKsystems • Downers Grove, IL • 14h ago

IT & Engineering

Description TEKsystems is looking for a .Net developer to help one of our customers in the western suburbs. This needs to sit 4 days/week on site and will not take Corp to Corp options. Skills .net, Sql, Asp.net, .net co...

14h ago

Go to Apply

Director of Strategic Analytics

U.S. Bank • Chicago, IL • 16h ago

IT & Engineering

At U.S. Bank, we're on a journey to do our best. Helping the customers and businesses we serve to make better and smarter financial decisions and enabling the communities we support to grow and succeed. We believe it tak...

16h ago

Go to Apply

Data Engineer Power BI

TEKsystems • Deerfield, IL • 23h ago

IT & Engineering

Description TEKsystems is looking for a Data Engineer to lead the design, build, and optimization of our modern data platform on Microsoft Fabric-with a focus on Fabric Data Warehouse, OneLake, and Lakehouse patterns. Th...

23h ago

Go to Apply

Software Engineer (Multiple Positions Available)

JPMorgan Chase • Chicago, IL • 1d ago

IT & Engineering

Duties: Design and develop software solutions that support critical workflows for payments platform of JPMorgan Chase & Co. Build application toolsets to ensure the payments platform is automated and accounted for. S...

1d ago

Go to Apply

Software Engineer - Data Platform

R1 RCM • Chicago, IL • 1d ago

IT & Engineering

Phare is building healthcare's first Revenue Operating System - a platform that uses AI to make hospital billing and reimbursement effortless, accurate, and fair. We're part of R1, one of the largest companies managing h...

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.