Manufacturing Engineer II

Dexter Magnetic Technologies • Torrance, CA • 6h ago

Magnetic Component Engineering ("MCE"), a subsidiary of Dexter Magnetic Technologies ("Dexter"), manufactures permanent magnets and magnetic assemblies made to demanding customer specification in the aerospace / defense, semiconductor equipment, medical, and industrial end markets. MCE is based in Torrance, CA and operates one 48,000 square foot facility with 85 employees.

For more information on Magnetic Component Engineering, please visit: https://www.mceproducts.com/

Basic Purpose and Objective of the Position

The Manufacturing Engineer II supports production operations by developing, improving, and sustaining manufacturing processes. This role builds on entry-level machining experience and focuses on applying engineering fundamentals to CNC machining, tooling, documentation, and continuous improvement initiatives. The engineer works closely with machinists, quality, and engineering teams to improve safety, quality, delivery, and cost.

Major Responsibilities - reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions:

Be a safety role model. Engage with employees, supervision, and management to create and promote a safe work environment. Always work first to engineer safety into our work processes.

Apply DMAIC and Lean/6SIGMA tools to identify defects/waste in the manufacturing process and eliminate root cause(s).

Support CNC machining operations (lathe, mill, or EMD machines) by assisting with process development, setup optimization, and troubleshooting

Create and maintain manufacturing documentation, including setup sheets, bills of materials (BOMs), routings, and work instructions

Assist in the selection and optimization of cutting tools, fixtures, and machining strategies

Support new product introduction (NPI) and engineering change implementation

Analyze production issues and assist with root cause analysis and corrective actions

Collaborate with Quality Engineering to ensure processes meet drawing, GD&T, and inspection requirements

Support continuous improvement initiatives related to cycle time reduction, scrap reduction, and process capability

Assist with CNC program review and validation (editing support as needed; not primary programmer role)

Provide floor support to machinists and production personnel as required

Ensure compliance with safety, quality, and manufacturing standards

Actively engage with all of MCE to support our Lean Transformation, deploying Lean Tools to improve employee safety, processes and decrease cost. Problem solves gaps and redesign. Implement mistake-proofing concepts to prevent product defects.

Oversee the fabrication of models and perform tests to determine compliance to specification. Problem solves gaps and redesign. Implement mistake-proofing concepts to prevent product defects.

Analyze and design lean manufacturing cells using effective systems and simulation tools to optimize use of space, equipment, material and personnel.

Ensure vendors/subcontractors are manufacturing products according to product specifications. Ensure that all manufacturing product specifications are developed, and testing procedures are in place before utilizing vendors/subcontractors. Provide input and support during the selection process of new vendors.

Communicate with and provide technical expertise to; suppliers, customers, Quality, Manufacturing, Purchasing, and Sales.

Assists with special projects and perform other related duties as assigned. Completes other tasks as assigned or required.

Essential Qualifications

Education, Experience & Certifications

Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, or related field

Entry-level to intermediate machining experience (shop floor exposure, internship, or prior machinist role)

Basic understanding of CNC machining processes, tooling, and materials

Ability to read and interpret engineering drawings and GD&T

Familiarity with standard manufacturing documentation and change control processes

Strong problem-solving and communication skills

Preferred Qualifications

1-3 years of manufacturing or machining experience

Experience with CNC lathes and/or mills

Exposure to CAM software and CNC programming fundamentals

Knowledge of lean manufacturing and continuous improvement tools

Experience with SolidWorks

Salary Range: $100,000-$105,000 + bonus

We offer a comprehensive benefits package, including Medical/Rx, Dental, Vision, Flexible Spending Accounts, Basic Life/AD&D (includes coverage for dependents 100% Company paid), Short-Term Disability, Long-Term Disability (100% Company paid), Supplemental Life/AD&D, 401(k) with Company match, tuition assistance after 1 year, paid time off, and 11 paid holidays.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws.

For further information, please review the Know Your Rights notice from the Department of Labor.

Similar Jobs

LDAR Technician

HPC Industrial • Wilmington, CA • 4h ago

IT & Engineering

HPC-Industrial, powered by Clean Harbors, in Wilmington, CA is looking for an LDAR Technician to join their safety conscious team at a customer site! The LDAR Technician identifies, documents, and tags fugitive emissions...

4h ago

Go to Apply

LDAR Technician

HPC Industrial • Torrance, CA • 4h ago

IT & Engineering

4h ago

Go to Apply

LDAR Technician

HPC Industrial • Long Beach, CA • 4h ago

IT & Engineering

4h ago

Go to Apply

Mechanical Engineer

TAD PGS, Inc. • Long Beach, CA • 6h ago

IT & Engineering

We have an Excellent Contract to Hire position for aMechanical Engineer to join a leading Company located in the Long Beach, CA or Centennial, COsurrounding area. Pay Rate: $50.00 - $70.00 US Citizenship is required. Can...

6h ago

Go to Apply

Mechanical Engineer

TAD PGS, Inc. • Long Beach, CA • 6h ago

IT & Engineering

We have an outstanding Contract to Hire position for aMechanical Engineer to join a leading Company located in the Long Beach, CA or Centennial, COsurrounding area. Pay Rate: $50.00 - $70.00 US Citizenship is required. C...

6h ago

Go to Apply

Mechanical Engineer

Actalent • Pasadena, CA • 6h ago

IT & Engineering

Job Title: Mechanical Engineer For immediate consideration, please apply directly to this job posting AND email me at biacosta @actalentservices.com with the following: 1) word copy of resume 2) 2-3 professional referenc...

6h ago

Go to Apply

Sr Mechanical Engineer

NBC Universal • Universal City, CA • 6h ago

IT & Engineering

NBCUniversal is one of the world's leading media and entertainment companies. We create world-class content, which we distribute across our portfolio of film, television, and streaming, and bring to life through our glob...

6h ago

Go to Apply

Intelligence Systems Electrical Hardware Design Engineer (Associate or Mid-Level)

The Boeing Company • Huntington Beach, CA • 20h ago

IT & Engineering

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity f...

20h ago

Go to Apply

Electrical Assembly, Integration, & Testing Engineer, Quantum Computing

Amazon • Pasadena, CA • 20h ago

IT & Engineering

Description The Amazon Center for Quantum Computing (CQC) team is looking to hire an Electrical Assembly & Testing Engineer. This role builds, tests, and calibrates delicate electronic components for quantum computin...

20h ago

Go to Apply

Electrical Engineer - 4+ years experience - LA28

AECOM • Los Angeles, CA • 20h ago

IT & Engineering

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work he...

20h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.