Quality Engineer Project Lead

CNH INDUSTRIAL AMERICA LLC • Sturtevant, WI • 5h ago

JOB REQUIREMENTS: Duties: The Quality Engineer Project Lead at CNH Industrial America LLC in Sturtevant, WI will be responsible for focusing on addressing quality issues instantly as it pertains to Man/Method/Machine matters. Develop and implement programs to establish and maintain quality standards of existing products and services. Develop programs to focus employees on quality improvement. Conduct Non-Destructive Examination (NDE) and Quality Control (QC) inspections on products, materials, components, and parts at different stages of the production process to ensure compliance with established quality and reliability standards. Collect and analyze statistical data from processes to confirm compliance with established standards and identify deviations from those values. Develop, assure, and maintain the quality of products and processes, including standard procedures (e.g., ISO 9001:2000, ISO 14000 family of standards), quality audits/review, Taguchi methods, and process re-engineering. Develop policies, procedures, and methods to evaluate and improve the quality of products, materials, components, and operations. Advise on new or enhanced methods, procedures, and standards. Implement new tooling for better process control and safety concerns. Collaborate with design engineering to propose changes for eliminating safety concerns and quality defects. Assist in reducing Application Protocol Data Unit (ADPU) by root cause countermeasure of daily defects. Replace missing torque tools in station; Implement engineering changes. Analyze warranty claims from customers, comprehend how the assembly process effects the claims, implement robust countermeasures to eliminate defects. Assisting in pareto hydraulic oil leaks for both internal and external customers and perform root cause countermeasure activities for each defect. Investigate new process, tooling, and design changes to eliminate defects. Investigate electrical routing, specifically around the engine harness, to prevent pinch points. Improve overall design for assembly and design for manufacturing to reduce and eliminate customer focused flaws. Participate in Design Failure Modes and Affects for new engineering releases prior to implementing on the assembly floor. Salary: \$69,347- \$96,600/year Minimum Requirements: Requires a Bachelor\'s degree in Mechanical Engineering, Manufacturing Engineering or a directly related field plus 2 years of experience as manufacturing engineer or related occupation. The 2 years of experience must include 2 years of experience with each of the following: (1) RCA/8D methodology for root cause analysis and corrective action; (2) SolidWorks or other 3D CAD software for product and tooling design; (3) DFMEA and PFMEA analysis for risk assessment and mitigation; (4) Lean manufacturing principles and implementation; (5) Statistical Process Control (SPC) and Minitab for data analysis; (6) Six Sigma methodologies for process improvement; (7) Quality Management Systems, including ISO 14001-2015, ISO 45001- 2018, and ISO 50001-2018; (8) Geometric Dimensioning and Tolerancing; (9) inspection tools and equipment, including CMM, calipers, micrometers, and gauges; and (10) control plans and process audits for continuous improvement. Interested candidates see all job duties and requirements, and apply online at http://cnh.com/ See Job ID ** OTHER EXPERIENCE AND QUALIFICATIONS: Minimum Requirements: Requires a Bachelor\'s degree in Mechanical Engineering, Manufacturing Engineering or a directly related field plus 2 years of experience as manufacturing engineer or related occupation. The 2 years of experience must include 2 years of experience with each of the following: (1) RCA/8D methodology for root cause analysis and corrective action; (2) SolidWorks or other 3D CAD software for product and tooling design; (3) DFMEA and PFMEA analysis for risk assessment and mitigation; (4) Lean manufacturing principles and implementation; (5) Statistical Process Control (SPC) and Minitab for data analysis; (6) Six Sigma methodologies for process improvement; (7) Quality Management Systems, including ISO 14001-2015, ISO 45001- 2018, and ISO 50001-2018; (8) Geometric Dimensioning and Tolerancing; (9) inspection tools and equipment, including CMM, calipers, micrometers, and gauges; and (10) control plans and process audits for continuous improvement. ** APPLICATION INSTRUCTIONS: Apply Online: http://cnh.com/ Qualified females, minorities, and special disabled veterans and other veterans are encouraged to apply.

Similar Jobs

Life Underwriting Specialist Remote.

NORTHWESTERN MUTUAL LIFE INSURANCE • Milwaukee, WI • 4h ago

IT & Engineering

JOB REQUIREMENTS: Please Note: The recruitment process for this position is expected to take approximately 6 to 8 weeks. This role will start on 4/27/2026. Introduction: Join our team as an entry-level underwriter in a d...

4h ago

Go to Apply

Technical Support Intern

REHRIG PACIFIC CO • Pleasant Prairie, WI • 4h ago

IT & Engineering

JOB REQUIREMENTS: Number of Openings: 1 Job Title: Technical Support Intern Occupational Category: Please choose the most appropriate choice based on the Job Title and Description. Duties and Responsibilties of Job: Summ...

4h ago

Go to Apply

Mechanical Engineer

GRAEF • Milwaukee, WI • 5h ago

IT & Engineering

JOB REQUIREMENTS: GRAEF, a leading U.S. consulting firm, has been providing exceptional careers and quality engineering, planning and design services to our clients since 1961. We recognize that the best workplaces are f...

5h ago

Go to Apply

FAC ENG/GENERAL TECH 1

Kroger Family of Companies • Milwaukee, WI • 5h ago

IT & Engineering

Assist with general maintenance, repairs and support to assigned service calls. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety. RESPONSIBILITIES Drive independently...

5h ago

Go to Apply

Business Analyst

Arvato Bertelsmann • Pleasant Prairie, WI • 6h ago

IT & Engineering

The Business Analyst will be responsible for a global technology company customer at Arvato USA LLC, that includes analysis of warehouse processes, inventory accuracy, client and vendor invoices, transport performance, e...

6h ago

Go to Apply

Electrical Engineering Specialist

CDM Smith • Racine, WI • 19h ago

IT & Engineering

44034BR Requisition ID: 44034BR Business Unit: IND Job Description: CDM Smith is seeking an Electrical Engineering Specialist to support our growing Industrial Division. This role will lead and execute complex electrical...

19h ago

Go to Apply

Electrical Engineering Specialist

CDM Smith • Milwaukee, WI • 20h ago

IT & Engineering

20h ago

Go to Apply

Electrical Engineering Specialist

CDM Smith • Kenosha, WI • 20h ago

IT & Engineering

20h ago

Go to Apply

MSC - Onsite Specialist - Milwaukee

ManpowerGroup • Oak Creek, WI • 1d ago

IT & Engineering

Our client, a leading organization in the manufacturing industry, is seeking an Onsite Specialist to join their team. As an Onsite Specialist, you will be part of the Operations Department supporting the onsite solutions...

1d ago

Go to Apply

MSC - Onsite Specialist - Milwaukee

ManpowerGroup • Oak Creek, WI • 1d ago

IT & Engineering

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.