CNC Machinist & Programmer

EPSILON SYSTEMS • San Diego, CA • 4h ago

Epsilon Systems Solutions, Inc. is seeking a full-time CNC Machinist & Programmer I in San Diego, CA.

Summary:

The position will provide maintenance, repair and technical support to the customer. Operate and maintain a variety of inside CNC machines. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) that contain information required to accomplish work.

Duties and Responsibilities:

Machines, fabricates, and refurbishes newly designed and replacement shipboard components utilizing templates and technical documentation to include ships' drawings.

Completes machine repairing, manufacturing new, removal, repairs, modifying, and testing of various shipboard components.

Determines speeds and feeds, coolants, and lubricants or abrasives to be used to cut, turn, drill, mill, bore, tap, thread, ream, lap, hone, shape, and grind or finish item.

Supports personnel that are able to machine materials to include: stainless steel, 300/400 series; monel; K-monel; copper; brass; aluminum, 4140, 4130, 6061-T6; nylon; Teflon; and various plastics.

Follows the requirements and procedures set forth in FWPs and CWPs.

Reads, understands, and works to the requirements of applicable ship drawings, blueprints, equipment technical manuals, and other applicable approved technical references.

Uses shop mathematics including trigonometry and geometry and hold tolerances to one ten-thousandths (.0001) of an inch.

Maintains dimensional accuracy by inspection of parts using various precision measuring instruments including: sine plates, comparators, micrometers, calipers, v-blocks, angle plates, indicators, dial height gauges, go/no-go gauges, thread gauges, surface gages and other measuring tools.

Determines which machine tool would be used most effectively, and the proper sequence of operations on each machine.

Makes new job setups on a variety of different @types of equipment involving accurate alignment in order to maintain specified overall tolerances.

Sets up and operate conventional machine tools, including: horizontal lathes, vertical turret lathes, horizontal boring machines, radial arm drills, vertical and horizontal milling machines, bench grinders, ID and OD grinders, surface grinders, jig boring machines, hones, and other manual machine tools.

Sets hard jaws and cut soft jaws to hold outside and inside diameters.

Touches off tools using tool eye, and manual touch off using tool, wear, and work offsets.

Uses turning tools, boring bars, insert drills, reamers, inside groovers, outside groovers, part off tools, and threading tools.

Uses tool offsets and work offsets on CNC machining centers and CNC lathes.

Uses Master Cam X10 to program computer numeric control (CNC) machining centers and lathes.

Programs CNC lathes using Fanuc control. Set up and operate 3, 4, and 5-axis CNC milling centers.

Programs and edits programs for CNC machining centers.

Inputs (MDI) machine operations.

Sets up and operates single and multiple spindle CNC lathes.

Required Qualifications:

High school diploma or equivalent

Minimum of 2 years of work experience performing CNC machine programming and operations

Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts

Knowledge and difference of grades of inserts and radius of inserts.

Ability to pass PQS 301 Craftsmen qualifications

Ability to read schematics and blue prints

Ability to read technical manuals and repair standards

Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings

Ability to obtain and maintain a secret security clearance

Preferred Qualifications:

Ability to setup and operate 5 axis spindle CNC lathes

Knowledge of the difference between grades of inserts and radius of inserts

Experience operating water jet cutting machines

Knowledge of OMAX waterjet and Intelli-MAX® software

Pay Range:

The pay range for this role is $26.26 -$27.00 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.

ADA Notations:

Requires walking, reaching, sitting and concentration in the presence of occasional noise

Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships)

Ability to lift, carry and move objects up to 50 lbs. in weight

Office, warehouse, laboratory, pier side, shipboard

Noise conditions range from very quiet to loud

Ability to wear a face mask while working

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Similar Jobs

Marine Mechanic Technician I

EPSILON SYSTEMS • Imperial Beach, CA • 3h ago

IT & Engineering

Epsilon Systems Solutions, Inc. has opportunities available for full time Marine Mechanic Technician I in San Diego, CA. Summary: The Marine Mechanic Technician I will provide troubleshooting, maintenance, repair and mat...

3h ago

Go to Apply

Marine Mechanic Technician I

EPSILON SYSTEMS • Imperial Beach, CA • 3h ago

IT & Engineering

3h ago

Go to Apply

Naval Elevator Technician IV

EPSILON SYSTEMS • San Diego, CA • 8h ago

IT & Engineering

Epsilon Systems Solutions, Inc. is seeking a full time Naval Elevator Technician IV in San Diego, CA. Summary: This position will work closely with Ship's Force, Government and contract personnel to provide electrical te...

8h ago

Go to Apply

Mobile Engineer

ABM Industries • San Diego, CA • 8h ago

IT & Engineering

Overview ABM is seeking a Mobile Building Engineer (MIT) to support multiple client sites through 100% travel. This role requires expertise in HVAC, electrical, plumbing, and general building maintenance, ensuring safe a...

8h ago

Go to Apply

Computer Assembler

Core Systems • Poway, CA • 12h ago

IT & Engineering

Job Type Full-time Description We are seeking a skilled Computer Assembler to join our team. The successful candidate will be responsible for assembling computer components and ensuring that they function properly. Using...

12h ago

Go to Apply

Ground System Architect/Integrator /Staff Electronics Engineer

Northrop Grumman • San Diego, CA • 22h ago

IT & Engineering

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportuni...

22h ago

Go to Apply

Associate/Engineer Embedded Software

Northrop Grumman • San Diego, CA • 1d ago

IT & Engineering

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportuni...

1d ago

Go to Apply

Sr Principal Software Engineer - Thread Lead

Northrop Grumman • San Diego, CA • 1d ago

IT & Engineering

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Top Secret TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible oppor...

1d ago

Go to Apply

Staff Software Engineer - Thread Lead

Northrop Grumman • San Diego, CA • 1d ago

IT & Engineering

1d ago

Go to Apply

Agentic Capability Engineer

Deloitte • San Diego, CA • 1d ago

IT & Engineering

Our Deloitte AI & Engineering team to transform technology platforms, drive innovation, and help make a significant impact on our clients' success. You'll work alongside talented professionals reimagining and reengin...

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)