Automation Controls Engineer

Agilent Technologies • Frederick, CO • 11h ago

Job Description

Join a growing team with this exciting opportunity for anAutomation Controls Engineerat our Frederick, Colorado GMP facility. Work in our dynamic, fast-paced, API-Biopharma manufacturing environment with the ability to contribute to the growing industry of oligonucleotide (DNA-RNA) based therapeutics.

Key Responsibilities:

Subject matter expert for GMP manufacturing process control systems, Supervisory Control and Data Acquisition (SCADA) systems, Distributed Control Systems (DCS), PLCs, Building Automation System (BAS), and automation/controls systems associated with various independent pharma/bioprocessing equipment.

Support on-the-floor automation/controls troubleshooting as needed to ensure equipment uptime and manufacturing operations.

Responsible forimplementing system improvement, fixes, and process optimization PLC and SCADA code changes.

Lead plant control system detailed design specifications, relevant change controls, and 21 CFR Part 11 data integrity compliance.

Support control and computer system validation activities including review and execution of automation Factory Acceptance Tests, Site Acceptance Tests, and Installation and Operational Qualification protocols.

Collaborate with quality assurance to support change controls (CC/CSC), Corrective and Preventative Actions (CAPA), and audit responses.

Qualifications

Bachelor's or Master's Degree in Chemical, Mechanical, or Electrical Engineering or equivalent; may consider equivalent combination of training, education, and relevant experience.

4+ years combined experience with automation/controlsin pharma/biopharma and fine chemicals industry.

Experience with Rockwell Automation Studio 5000, DeltaV, GE IFIX SCADA, FactoryTalk View, Allen-Bradley CompactLogix, ControlLogix PLCs, PanelViews, Allen-Bradley Variable Frequency Drives, Thin client architecture, and ThinManager.

Practical knowledge of GMP, GAMP5, and experience in the generation of controlled documents.

Preferred Skills:

4+ years of experience working in a GMP / FDA regulated environment.

Familiarity with bioprocessing unit operations and associated equipment.

Knowledge of OT design principals, network architecture, virtual machines, and Thin Client architecture.

Ability to interpret and create electrical one-line diagrams and controls drawings.

Experience with Siemens Desigo CC based BAS software

Experience with ASI, HART, Profibus, DHP, TCP/IP communication protocols

Ability to work independently with limited direct supervision to complete assigned tasks and projects

Ability to interact closely and maintain relationships with Process Engineering, Manufacturing Sciences, Manufacturing, Maintenance, Validation, and Quality organizations.

Experience in applying ISA S88, S95, etc standards and implementation of the best practices.

Experience integrating OT and IT infrastructure for resiliency and appropriate cyber security posture.

Familiarity with computer hardware, virtualized systems, and network architecture.

Additional Details

This job has a full time weekly schedule. Applications for this job will be accepted until at least June 24, 2026 or until the job is no longer posted.

The full-time equivalent pay range for this position is $103,200.00 - $161,250.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: https://careers.agilent.com/locations{rel="noopener noreferrer" target="_blank"}

Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email jobposting@agilent.com{rel="noopener noreferrer" target="_blank"}

or contact +1-262-754-5030. For more information about equal employment opportunity protections, please visit www.agilent.com/en/accessibility{rel="noopener noreferrer" target="_blank"}

Travel Required:

Occasional

Shift:

Day

Duration:

No End Date

Job Function:

ManufacturingPlease Apply at: https://www.aplitrak.com/?adid=YmJnZW5lcmljLjg4Nzc4Ljg3NjBAYWdpbGVudHRlY2hub2xvZ2llc2NvbXAuYXBsaXRyYWsuY29t{rel="noopener noreferrer" target="_blank"}

Similar Jobs

ASSOCIATE TECHNICAL SPECIALIST - Mission Implementation - Boulder, CO

Southwest Research I • Boulder, CO • 8h ago

IT & Engineering

Who We Are: SwRI is an independent, nonprofit, applied engineering and physical science research and development organization with over 3200 employees. The Solar System Science & Exploration Division of SwRI pushes t...

8h ago

Go to Apply

Automotive B Technician

Hyundai Careers • Loveland, CO • 8h ago

IT & Engineering

A technician capable of diagnosing and repairing most systems of the automobile, with little guidance or support from an A-Tech, Shop Foreman, or Team Leader. Efficient and effective at on the job learning to apply to ne...

8h ago

Go to Apply

Repair and Tool Technician

Home Depot • Firestone, CO • 15h ago

IT & Engineering

Job Description Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensur...

15h ago

Go to Apply

Blade Structural Engineer

Envision Energy USA Ltd • Boulder, CO • 1d ago

IT & Engineering

Design new wind turbine blades, interfacing with turbine and component design teams to optimize blade and interface designs; Design, develop, and implement multi-objective structural design (designing structures to meet...

1d ago

Go to Apply

Assembly & Test Technician - Level 2 (1st shift)

Honeywell • Arvada, CO • 1d ago

IT & Engineering

As an Assembly & Test Technician Level 2 here at Honeywell, you will be responsible for assembling, testing, and troubleshooting complex mechanical systems to ensure product quality and reliability. You will work clo...

1d ago

Go to Apply

Embedded Software Engineer

Alten USA • Lafayette, CO • 1d ago

IT & Engineering

We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life-from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+...

1d ago

Go to Apply

Advanced Network Engineer - Colorado

Serco • Loveland, CO • 2d ago

IT & Engineering

Position Description & Qualifications Serco is excited to support the Air Force Modeling and Simulation Support Services (AFMS3) contract. The primary purpose of this contract is to ensure that the Department of the...

2d ago

Go to Apply

Lead Engineer - Packaged & Mechanical Systems Product Standards and Methods

GE Vernova • Longmont, CO • 2d ago

IT & Engineering

Job Description Summary This position is in Services for Gas Power Controls for New Product Introduction (NPI) and product sustaining engineering. The successful candidate will participate in engineering and designing me...

2d ago

Go to Apply

Embedded Software Engineer

Actalent • Loveland, CO • 2d ago

IT & Engineering

Job Title: Embedded Software Engineer Job Description This onsite Embedded Software Engineer role in Loveland, CO focuses on designing and developing embedded firmware for next-generation water quality instrumentation. Y...

2d ago

Go to Apply

Senior Software Engineer

Publicis Groupe • Westminster, CO • 2d ago

IT & Engineering

Company Description Click here to view how Epsilon transforms marketing with 1 View, 1 Vision, 1 Voice. ( https://www.youtube.com/watch?v=xpjtfpntuv8&t=1s ) Overview For this role, we are seeking a qualified Senior S...

2d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)