Summary This position is located in the Washington Headquarters Services (WHS), Facilities Services Directorate (FSD), Facilities Operations and Services (FOSD), Facilities Operations Group (FOG), Reservation Engineering Operations Branch (REO) program Department of Defense (DoD). The Division is responsible for the management (including establishing policies standards and procedure), administration and operation of facilities and services, owned or operated by the Department of Defense (DoD). Responsibilities This is a Direct Hire Public Notice, under this recruitment, applications will be accepted for each location and/or installation identified in this Public Notice and selections are made for vacancies as they occur. There may or may not be actual/projected vacancies at the time you submit your application. This Public Notice is to gather applications which may or may not result in a referral or selection. This position is being filled under Direct Hire Authority (DHA) in accordance with Section 5 U.S.C. 9905, as amended by P.L. 116-92, SEC 1109, further amended by P.L. 116-283, SEC 1117 and further amended by P.L.118-31, SEC 1104 and SEC 1250B. Please read this Public Notice in its entirety prior to submitting your application for consideration. Incumbents typical work assignments may include the following: Designing, analyzing, configuring, testing and troubleshooting highly complex Heating, Ventilation, and Air Conditioning (HV AC), building automation systems. Providing specialized mechanical engineering consultation which requires the application of expert knowledge and experience in the solution of a variety of unusual mechanical engineering problems and Facility Related Control Systems. Plans and oversees various projects of broad scope and unconventional nature. For individual projects, develops a detailed scope of work that specifically addresses the work requested. Applies scientific and engineering concepts, principals, phenomena and relationships to: assess specific requirements, delineate appropriately engineered designs, develop preliminary and fmal design plans, engineering specifications, cost estimates and procurement packages in support of the operation, preventive maintenance and repair ofHV AC, Facility Related Control System, building automation, chilled water, steam, domestic water, and sewer systems and equipment. Performs in-progress and final inspections of contract work to ensure that workmanship and materials are satisfactory, and that customer requirements and special requirements such as accomplishment of safety regulations are met. ACTIVE DUTY SERVICE MEMBERS: Federal agencies treat active duty service member as veterans, disabled veterans, and preference eligible, when they submit, as part of their application package, a "certification" of active service in lieu of a DD-214, indicating the service member is otherwise eligible and will be discharged or released within 120 days from the date of submission.. A "certification" letter should be on letterhead of the appropriate military branch of the service and contain (1) the military service dates including the expected discharge or release date; and (2) the character of service. This "certification" must include your rank, dates of active duty service, @type of discharge and character of service (i.e. honorable), and date any terminal leave will begin. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters. Active duty members that fail to provide a valid "certification" of service with their initial application will be found "not eligible". Members may be appointed before the effective date of their military retirement/separation if they are on terminal leave. Requirements Conditions of Employment Qualifications In order to qualify for this position, you must meet the requirements described below. Basic Requirement: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-@type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) You may qualify at the GS-07 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-06 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: 1) Assisting in the design, analysis, and evaluation of basic mechanical systems and equipment; 2) Applying fundamental engineering principles to solve well-defined problems under close supervision; 3) Assisting in the review of simple engineering drawings and technical specifications. You may qualify at the GS-09 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-07 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: 1) Applying standard engineering practices to conventional facility systems like HVAC, plumbing, or chilled water systems; 2) Planning, designing, testing, and overseeing the development and or sustainment of mechanical systems or devices; 3) Preparing basic design plans, cost estimates, and technical specifications for small-scale projects. You may qualify at the GS-11 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-09 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: 1) Designing and overseeing modifications to mechanical systems and equipment, such as building automation, chilled water, or steam systems; 2) Developing and reviewing statements of work, plans, and technical specifications for engineering projects; 3) Coordinating with contractors and other stakeholders on project execution and resolving moderately complex technical issues. You may qualify at the GS-12 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-11 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: 1) Analyzing and resolving complex issues in mechanical systems, requiring significant adaptation of standard guides and practices; 2) Developing and implementing comprehensive preventive maintenance programs and long-range plans for utility and building mechanical systems; 3) Providing technical guidance and advisory services on complex mechanical engineering matters. You may qualify at the GS-13 level, if you fulfill the following qualification requirement: One year of specialized experience equivalent to the GS-12 grade level in the Federal service (experience may have been gained in the private sector) that demonstrates your ability in: 1) Serving as a technical expert and consultant for highly complex and mission-critical mechanical systems, including HVAC, building automation, and utility distribution systems; 2) Applying advanced engineering principles to design, troubleshoot, and resolve novel or obscure problems that may lack precedent; 3) Developing and evaluating long-range master plans for major mechanical infrastructure and making authoritative recommendations on system development and sustainment; 4) Managing the scope, cost, and execution of large-scale engineering projects and providing expert analysis on controversial issues. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). You will receive credit for all qualifying experience, including volunteer experience. All qualifications and education requirements must be met by the closing date of this announcement and clearly documented in your resume. Your resume may not exceed two (2) pages. For qualifications determinations, it is recommended that applicants include their months and hours worked per week for each employment listed on their resume. If a determination is not able to be made about the duration of your creditable experience for qualification requirements, you will be removed from consideration. Read more about what should I include in my federal resume at https://help.usajobs.gov/faq/application/documents/resume/what-to-include Education SUBSTITUTION OF EDUCATION FOR EXPERIENCE AT GS-07 LEVEL: 1 year of graduate-level education or superior academic achievement OR SUBSTITUTION OF EDUCATION FOR EXPERIENCE AT GS-09 LEVEL: 2 years of progressively higher level graduate education leading to a master's degree OR master's or equivalent graduate degree SUBSTITUTION OF EDUCATION FOR EXPERIENCE AT GS-11 LEVEL: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree OR Education cannot be substituted for experience at the GS-12. OR Education cannot be substituted for experience at the GS-13. ARE YOU QUALIFYING BASED ON EDUCATION or A COMBINATION OF EDUCATION AND EXPERIENCE? You must provide sufficient documentation of your education in your resume. You MUST provide a copy of official or unofficial transcripts or degrees in your application package. It may also be acceptable to document your applicable course listing in your resume (course number, credits earned, etc.). Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Applicants can verify accreditation at the following website: http://www.ed.gov/admins/finaid/accred/index.html. All education claimed by applicants will be verified by the appointing agency. If selected, an official/sealed transcript will be required prior to appointment. PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society. GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Additional Information Probationary Periods: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing an online application, you may request an alternative application. Please send an email to the following address for information on how to obtain an alternative application: whs.job.application.assistance@mail.mil Reemployed Annuitants: Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. /www.esd.whs.mil/DD/DoD-Issuances/140025/ Current or Former Political Appointees: Agencies must seek prior approval from OPM before they can appoint a current or recent political appointee to a competitive or non-political excepted service position at any level. If you are currently or have been within the last 5 years, a political Schedule A, Schedule C, or Non-career SES employee in the executive branch, you MUST disclose that to the Human Resources Office. Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative. Additional vacancies may be filled by this announcement.
