Machinery Production Engineer

Philly Shipyard Inc • Philadelphia, PA • 3h ago

SUMMARY CONTINUED: The HVAC Production Engineer will help to resolve production and regulatory issues. They will interface with various parties, including production, planning, procurement, other engineering departments, design subcontractors, owner, classification society, and USCG to complete these activities. About 50% of the time will be in the field and 50% in the office.

ESSENTIAL FUNCTIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.

Ensure that all HPSI safety procedures, rules and regulations are followed and met

Perform field engineering activities for piping and machinery systems. Respond to issues by going onboard the vessel to investigate and document the issue. Interface with production supervisors or workers as appropriate

Create Design Change Notice packages for revised drawings or Corrective Action Notices to resolve issues. Create supporting drawings, sketches, or markups using Adobe, 2D or 3D CAD if necessary. Enter purchase requisitions as appropriate

Document material non-conformances or other issues with purchased material and equipment for feedback through the purchasing department or partner

Review and approve production installation drawings, manufacturing drawings, and bills of material. Check for accuracy against basic/detail design, yard and project standards, 3D model, previous vessels, and any known design changes. Identify any missing equipment or parts, interferences, production or regulation issues. Interface with other engineers or design partner for revision. Upload into document management and ERP systems

Create and distribute engineering Work Packages according to assigned schedule

Assist with development and implementation of owner change order requests

Communicate with class, USCG, FDA and any other required regulatory agency to resolve any regulatory or inspection issues raised during construction of the vessel

Assist with the startup and commissioning of piping related systems. Participate in dock testing and possibly Sea Trials. Document any issue and revise procedures accordingly. Assist with resolution of technical issues as needed

Participate and provide input to build method planning process. Interface with Planning and Production teams to determine correct timing and discipline for installation of all accommodation and insulation parts and equipment

Participate in weekly "Prep Team" cross-functional meetings. Present installation drawings to meeting participants, discuss, review, and record any requested changes by Production or Planning

Create and maintain equipment Installation Procedures to explain complex installation processes

Write Scope of Work documents to support tender of subcontracted labor

Maintain working knowledge and monitor development of classification and regulatory rules and requirements

Perform other related duties as required and assigned

COMPETENCIES

Able to communicate effectively with all levels of the organization, both verbal and written

Ability to manage assigned tasks according to the schedule with minimal oversight

Ability to multi-task several ongoing issues and assigned tasks

Detail oriented

Strategic thinking

Ability to work as a team member

SUPERVISORY RESPONSIBILTY

This position has no supervisory responsibilities.

EDUCATION AND EXPERIENCE

Bachelor's degree in Marine Engineering, Mechanical Engineering, or Naval architecture, or Associate's degree in Engineering Technology, Drafting or equivalent with 4 years' experience in shipbuilding

Proficiency with MS Office and 2D CAD systems, such as AutoCAD

Proficiency with metric system

Some knowledge of piping standards (ASTM, ASME, JIS, DIN, EN), valves, and machinery such as engines, pumps, heat exchangers, air compressors, purifiers, boilers, etc.

Experience with using a 3D CAD system. Experience with Aveva PDMS, Aveva Marine, or Tribon is a plus

Experience with an ERP system, such as SAP is a plus

Knowledge/experience concerning modern shipbuilding practices is a plus

WORK ENVIRONMENT

The Machinery Production Engineer should expect to engage in regular field work in the shipyard's fabrication shops, dry docks, warehouse, and onboard vessels as part of the above activities. Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.

*Hanwha Philly Shipyard is a TOBACCO FREE facility.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position in contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

POSITION TYPE/EXPECTED HOURS OF WORK

This is an on-site, full-time, salaried position. Monday through Friday with flexible start time.

OTHER DUTIES

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice.

Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Similar Jobs

Master Technician

Pep Boys • Philadelphia, PA • 53min ago

IT & Engineering

Overview Precision Tune Auto Care began as a small tune up shop in Beaumont, TX in 1976 and has grown to more than 320 service centers operating in six countries. We are a recognized world leader in the automotive servic...

53min ago

Go to Apply

Operations - Electrical Engineer (Nashville, TN)

Oracle • Trenton, NJ • 18h ago

IT & Engineering

Job Description Oracle Cloud Infrastructure (OCI) powers Oracle's global cloud services through highly available, large-scale, enterprise-grade data center environments. The Data Center Infrastructure Operations / Facili...

18h ago

Go to Apply

Ground Software Engineer

Lockheed Martin • King Of Prussia, PA • 18h ago

IT & Engineering

Description: WHO WE ARE Lockheed Martin is a global leader in aerospace, defense, and technology solutions, dedicated to pushing the boundaries of innovation and shaping the future of the industry. With a rich legacy of...

18h ago

Go to Apply

Ground Software Engineer

Lockheed Martin • King Of Prussia, PA • 18h ago

IT & Engineering

18h ago

Go to Apply

Staff Software Engineer (AI Platform - AI Acceleration)

Coinbase • Trenton, NJ • 19h ago

IT & Engineering

Ready to be pushed beyond what you think you're capable of? At Coinbase, our mission is to increase economic freedom in the world. It's a massive, ambitious opportunity that demands the best of us, every day, as we build...

19h ago

Go to Apply

Entry Level Electrical Engineer

Actalent • Rancocas, NJ • 1d ago

IT & Engineering

PLEASE NOTE: THIS IS A 70% TRAVEL ROLE! Responsibilities Conduct inspections and perform engineering tasks related to industrial equipment. Provide supervisory support for installation, start-up, and service/repair of eq...

1d ago

Go to Apply

Analytics Developer 3 - HEDIS Quality

Baylor Scott & White Health • Trenton, NJ • 1d ago

IT & Engineering

About Us Here at Baylor Scott & White Health we promote the well-being of all individuals, families, and communities. Baylor Scott and White is the largest not-for-profit healthcare system in Texas that empowers you...

1d ago

Go to Apply

Enviromental Engineer

Naval Foundry and Propeller Center • Philadelphia, PA • 1d ago

IT & Engineering

Career Fair! Come join us for in-person interviews, job offers will be given out on the spot! See below for details. Friday March 13th, 2026 10:30 a.m. - 1:00 p.m. Philadelphia Navy Yard S. 19th & Kitty Hawk Ave Phil...

1d ago

Go to Apply

Electrical Engineer

Naval Foundry and Propeller Center • Philadelphia, PA • 1d ago

IT & Engineering

1d ago

Go to Apply

Civil Engineer

Naval Foundry and Propeller Center • Philadelphia, PA • 1d ago

IT & Engineering

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.