Job Posting End Date
01-09-2026
Please note the job posting will close on the day before the posting end date
Job Summary
Perform technical and specialized work of a skilled nature in connection with electrical and control systems; analysis, detection and repair of single loop control systems , electronic devices, communication systems, and instruments such as meters, gauges and regulators; assist others in making tests, surveys and layout work and the development of reports documenting results.
Job Description
Control Technician Jr.:
Assist in locating and repairing defects in control systems involving electrical, electronic, mechanical, pneumatic or hydraulic components, using elementary, wiring, schematic, logic or control diagrams.
Assist in low and medium voltage circuit breaker electrical /mechanical interlock checks, repairs and adjustments that are associated with breakers and plant electrical control and distribution systems.
Assist in or perform preventive maintenance and repair activities on equipment such as: batteries, motors, compressed air systems, fork-lifts, electric heaters, etc.
Make required equipment checks and inspections. Record data, assist in performing tests and prepare reports, graphs, sketches and curves. Compile and record data relating to projects, tests, investigations. Insure all work is performed in accordance with all standards and specifications.
Assist others in engineering layouts and preparing data for engineering procedures, specifications, contracts, bills of materials and requisitions for the installation, maintenance and operation of equipment if applicable.
Use the work management system to locate or request parts, create work requests/work orders, search and record work histories if applicable.
As directed, request and accept permits to insure that equipment to be worked on has been properly cleared and tagged.
Assist in installing and removing grounds as directed.
Perform all other duties as assigned.
What We're Looking For:
Education requirements are listed below:
Two year Associates degree in electronics or a qualifying Engineering or Science, or high school diploma with two or more years of related military experience, or a high school diploma 5 or more years of related industrial technical electrical or controls experience
Work Experience requirement listed below:
Must have the knowledge and skill necessary to perform work in the installation, inspection, repair, adjustment, calibration and servicing of instruments and controls.
Must be able to read, interpret and work from simple prints, sketches and specifications.
Must be able to work effectively with other employees and learn to instruct and direct other employees. Must have demonstrated the ability to physically and mentally perform work in all areas and heights required
Required License(s)/Certification(s) are listed below:
Must possess the appropriate State driver's license.
Other Must Haves:
Physical demand level is Medium
Must have sufficient experience in the use of power industrial instrumentation to have a working knowledge of process control, and be able to inspect, repair, tune, and modify single element control loops.
Must have the working knowledge and skill needed to calibrate and adjust plant instruments and controls, and be capable of detecting and making repairs to control systems.
Must be able to perform necessary engineering calculations for test results, reports, performance and records. Must be able to read, interpret and work from moderately complex prints and specifications.
Must have a working knowledge of equipment and clearance procedures, and the rules, safety practices and procedures applicable to the work. Must have a working knowledge of OSHA, Regulatory, and Environmental guidelines, policies, and procedures.
Must be able to lead and direct other employees and obtain cooperation and satisfactory work results. Must have demonstrated the ability to physically and mentally perform work in all areas and height
Perform duties in accordance with all federal, state, local and company environmental, safety and health regulations, policies, procedures, rules and practices. Report unsafe conditions, practices, irregularities and abnormal conditions to appropriate supervision Stop all unsafe work
Lifting up to 50 pounds; carry 35 pounds, push pull up to 65 pounds
Frequent walking and standing
Climb ladders and stairs, squat, kneel
Ability to use hand tools and motorized equipment
Environmental conditions of cold, heat, dust, fumes
Where You'll Work:
On-Site at the Clinch River Plant
Control Technician:
Locate and repairing defects in control systems involving electrical , electronic, mechanical, pneumatic or hydraulic components, using elementary, wiring, schematic, logic or control diagrams
Install, remove, inspect, adjust, repair and calibrate instrumentation not associated with active trips such as: pressure, temperature, flow, gas analyzing, transmitting, receiving, recording, chemical testing devices and other equipment as assigned. Make simple circuit analysis and repair relays, electronic devices, meters, communication components and similar circuits.
As directed, perform simple control system monitoring and program modifications using a computer interface terminal and available monitoring systems including installed data historians as well as stand-alone data collection systems. Includes but is not limited to control diagnostics on distributed control systems (DCS) and control diagnostics and troubleshooting of programmable logic control systems (PLC). Complete technical calculations as necessary to support modifications, and document all changes.
Complete low and medium voltage circuit breaker electrical /mechanical interlock checks, repairs and adjustments that are associated with breakers and plant electrical control and distribution systems.
Perform preventive maintenance and repair activities on equipment such as: batteries, motors, compressed air systems, fork-lifts, electric heaters, HVAC systems, etc.
Make required equipment checks and inspections. Record data, assist in performing tests and prepare reports, graphs, sketches and curves. Compile and record data relating to projects, tests, and investigations. Insure all work is performed in accordance with all standards and specifications and documented appropriately.
Assist with engineering layouts and preparing data for engineering procedures, specifications, contracts, bills of materials and requisitions for the installation, maintenance and operation of equipment.
Complete control loop and input output checks on new and replacement equipment.
Use the work management system to locate or request parts, create work requests/work orders and search and record work histories if applicable.
Request and accept permits to insure that equipment to be worked on has been properly cleared and tagged. Assist in installing and removing grounds as directed.
Assist in installing and removing grounds as directed.
Perform similar or less skilled work as assigned.
What We're Looking For:
Education requirements are listed below:
Two year Associates degree in electronics or a qualifying Engineering or Science, or high school diploma two or more years of related military experience, or a high school diploma with 5 or more years of related industrial technical electrical or controls experience.
Work Experience requirement listed below:
Must have performed the duties of, and maintained all the qualifications of Control Technician-Junior and must be able to pass an examination and/or qualification demonstrations as determined by the Company.
Required License(s)/Certification(s) are listed below:
Must possess the appropriate State driver's license.
Other Must Haves:
Physical demand level is Medium.
Must have sufficient experience in the use of power industrial instrumentation to have a working knowledge of process control, and be able to inspect, repair, tune, and modify single element control loops.
Must have the working knowledge and skill needed to calibrate and adjust plant instruments and controls, and be capable of detecting and making repairs to control systems.
Must be able to perform necessary engineering calculations for test results, reports, performance and records. Must be able to read, interpret and work from moderately complex prints and specifications.
Must have a working knowledge of equipment and clearance procedures, and the rules, safety practices and procedures applicable to the work. Must have a working knowledge of OSHA, Regulatory, and Environmental guidelines, policies, and procedures.
Must be able to lead and direct other employees and obtain cooperation and satisfactory work results. Must have demonstrated the ability to physically and mentally perform work in all areas and height
Must possess the appropriate State driver's license.Perform duties in accordance with all federal, state, local and company environmental, safety and health regulations, policies, procedures, rules and practices. Report unsafe conditions, practices, irregularities and abnormal conditions to appropriate supervision Stop all unsafe work
Lifting up to 50 pounds; carry 35 pounds, push pull up to 65 pounds
Frequent walking and standing
Climb ladders and stairs, squat, kneel
Ability to use hand tools and motorized equipment
Environmental conditions of cold, heat, dust, fumes
Where You'll Work:
On-Site at the Clinch River Plant
In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.
Where Putting the Customer First Powers Everything We Do
At AEP, we're more than just an energy company - we're a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!
Compensation Data
Compensation Grade:
U006-520
Compensation Range:
$31.23 - $43.56
The Physical Demand Level for this job is: M - Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Light Work.
Hear about it first! Get job alerts by email. Log in to your Candidate Home Account today! If you don't have an account, you can create one.
It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.
