Electrical Technician (4PM-2:30AM)

The HEICO Companies, LLC • Baraga, MI • 3d ago

Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Escalate all unsafe conditions so they can be promptly addressed. Reports defective materials or questionable conditions to department supervisor immediately. Accurately follows work assignments as required by highly variable daily duties: Mechanical and Electrical assembly of 12, 24 volt, and 480 volt 3 phase electrical components and systems Material Handling Standard Housekeeping Safety and Quality Audits Assembly includes installation of gauges, switches, displays, lights, panels, motors, wire harnesses and other electrical components onto heavy equipment as required using hand, electrical and pneumatic tools. Read and interpret complex electrical schematics and drawings, communicating with Engineers as necessary. Programming of electrical components and machine computers. Use root cause analysis methodology for daily problem solving and implementing countermeasures to prevent recurrence. Read and interpret complex electrical schematics and drawings, communicating with Engineers as necessary Perform direct and indirect labor duties as required by the Supervisor. Check inventory of assigned task and area daily. Notify department lead or supervisor of potential parts shortages to prevent stock outages. Abide by the methods and procedures inherent in position as directed by management. Document build process and ensure correct work sequence is being followed. Periodically audit standard work. Assist with maintenance on company equipment and vehicles when necessary. Execute safety and facility improvement projects. Completes tasks as directed by manufacturing schedules with minimum supervision. Job Requirements Experience and Education Experience Minimum of 4+ years of electrical assembly/installation experience Education High School Diploma or GED Communication Excellent communication skills, both written and verbal communication. Technology General knowledge of MS Outlook, Experienced with Cummins Insite and Parker IQAN Other Requirements Experience with complex electrical schematics and drawings Problem solving skills and understanding of lean techniques (Kaizen, 5S, visual management, standard work. Knowledge of heavy equipment and assembly processes Ability to rapidly learn and retain knowledge required to assemble the product with consistent, high-level quality. Supervisory Responsibility - This position has no supervisory responsibilities. Position Type and Expected Hours of Work This is a full-time position. Work hours are Monday thru Thursday, 6:00 AM to 4:30 PM. Occasional overtime is required when electrical troubleshooting is needed. Some work on Fridays is required as needed. Travel No travel is expected for this position. Work Environment This position is stationed in a heavy equipment manufacturing environment. Products are assembled and tested in a progressive fashion on individual product lines. The product lines are made up of concrete floors, overhead cranes, tools, ladders/work platforms, carts, stand and material racks. Hand, pneumatic, hydraulic and electrical tools are used to assemble machines with a high degree of accuracy. Machines and materials move throughout the facility floor and occasionally move in/out of the facility through overhead doors. Most of the assigned tasks are indoors but outdoor tasks are possible. The employee is frequently exposed to fumes or airborne particles and moving mechanical parts. Physical Requirements The physical demands described here are representative of those that must be met by the Electrical Technician position to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work overtime beyond 40 hours/week dependent on varying Business needs. Operate Heavy Equipment, Forklifts, Trucks and Overhead Cranes Stand and walk on a concrete surfa

Similar Jobs

2nd Shift Assembly Tech (4pm-2:30am)

The HEICO Companies, LLC • Baraga, MI • 5d ago

IT & Engineering

5d ago

Go to Apply

Assembly Tech - Day shift with full benefits

The HEICO Companies, LLC • Baraga, MI • 1w ago

IT & Engineering

The Assembly Technician performs assembly of material handling equipment according to established specifications and instructions. Performs calibration, adjustments and final checks to ensure high quality products. Key P...

1w ago

Go to Apply

Electrical Technician

The HEICO Companies, LLC • Baraga, MI • 1w ago

IT & Engineering

Key Performance Areas Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Escalate all unsafe conditions so they can be promptly addressed. Reports defective...

1w ago

Go to Apply

Electrical Engineer

The HEICO Companies, LLC • Baraga, MI • 2w ago

IT & Engineering

Drives Business Results Develop electrical and control systems for off-road vehicles and mobile equipment Lead and manage electrical and control system development projects with responsibility for cost and timeline targe...

2w ago

Go to Apply

Design Engineer

The HEICO Companies, LLC • Baraga, MI • 2w ago

IT & Engineering

Key Performance Areas DEVELOP AND SUPPORT OFF-ROAD MACHINE'S DESIGN FOR TOTAL LIFE CYCLE Operate in a team environment, with other functional areas, providing input to design solutions and leading/participating in design...

2w ago

Go to Apply

Associate or Full Professor, Endowed Jim and Lorna Mack Chair of Bioengineering

Michigan Technological University • Houghton, MI • 3w ago

IT & Engineering

Associate or Full Professor, Endowed Jim and Lorna Mack Chair of Bioengineering Apply now ( https://secure.dc4.pageuppeople.com/apply/1021/gateway/default.aspx?c=apply&lJobID=494031&lJobSourceTypeID=796&sLang...

3w ago

Go to Apply

Essentials of Manufacturing Mechanical Engineer

Saint-Gobain • Lanse, MI • 3w ago

IT & Engineering

Manufacturing is evolving and Saint-Gobain North America is leading the way. - Today is an exciting time to be in manufacturing. At Saint-Gobain North America, we are asking the questions that will ultimately bring our f...

3w ago

Go to Apply

2nd Shift Warehouse Clerk 4pm-2:30am

The HEICO Companies, LLC • Baraga, MI • 2h ago

Management & Administrative

Receiving and Stocking: Unload and unpack incoming shipments of parts. Verify and inspect parts for accuracy and quality. Stock parts in designated locations within the warehouse. Order Picking and Packing: Accurately pi...

2h ago

Go to Apply

Busser

On The Border • Lanse, MI • 1d ago

Our Service Assistant, or BUSSER, brings more to the table than just Chips & Salsa! At On The Border Mexican Grill & Cantina we celebrate bringing people together! Itâ??s our mission to Have Fun, Work Smart, Be t...

1d ago

Go to Apply

Aftermarket Outside Parts Representative

The HEICO Companies, LLC • Baraga, MI • 2d ago

Key Performance Areas Sales Achievement Meet or exceed sales targets for OE Parts. Follow-up on quotes and track the success of sales efforts. Identify and pursue new sales opportunities to expand the customer base. Cust...

2d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.