Electrical Technician - Rotating Shifts

Staff Management | SMX • Fletcher, NC • 10h ago

With Staff Management | SMX, you'll get a weekly paycheck, learn new skills, meet new people, and work with a great management team in a clean and safe environment.

Ready to power up your career in Fletcher, NC? We're seeking a skilled Electrical Technician for a direct hire maintenance opportunity with a pay of $32.50 - $35.00/hour. Enjoy a unique 12-hour rotating swing shift that offers both challenge and generous time off, including a full week off! If you're looking for a stable role with a dynamic schedule, Send your resume to our RPS Recruiters Sam and Sarah at rps@staffmanagement.com to learn more!

Perks & Benefits: Other on the spot perks, Direct Deposit or Cash Card pay options, Medical / Dental Insurance, 401k, Paid Time Off.

Shifts: Rotating Shifts.

Employment Types: Direct Hire.

Pay Rate: $32.50 - $35.00 / hour

Duties:

Knowledge of safety standards applicable to the department and other pertinent rules / regulations governing work standards.

Knowledge of mechanical and electrical maintenance operations of the machinery of the facility.

Knowledge of electricity and electrical systems sufficient to build panels, estimate load requirements, wire sizes, etc.

Knowledge of hazardous materials and safe handling procedures.

Ability to troubleshoot in electrical, hydraulic, and pneumatic technology.

Ability to program and work with the PLC system.

Ability to perform multiple priorities with minimal supervision.

Ability to work with and run conduit.

Position Requirements:

Experience: Two years of industrial electrical experience to include PLC troubleshooting and three-phase motor control required.

Physical Working Conditions:

Heavy work. Tasks involves pushing / pulling, lifting, and handling material up to 100 pounds plus standing and walking during a minimum twelve hour shift.

Requirements: Background Check, Drug Test, Must be at least 18 years old., required education: HS Diploma or GED.

Work Location: Wilsonart, Fletcher, NC 28732.

Job Types: Manufacturing, Electrician.

Industry: Manufacturing.

The hourly rate for this position is anticipated between $32.50 - $35.00 per hour. This range is a good-faith estimate, based on the shift you work and other considerations permitted by law. An employee''s pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer medical, dental, vision, life, and more. More details about benefits can be found at https://flimp.live/trueblueassociates#home .

SMX, LLC is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, sexual orientation, age, gender identification, protected veteran status, or any other characteristic protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law.

Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations at HR-Advice@trueblue.com or 1-800-610-8920. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs.

SM | SMX is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, sexual orientation, age, gender identification, protected veteran status, or any other characteristic protected by law.

Similar Jobs

Project Engineer - Manufacturing

LINAMAR NORTH CAROLINA INC • Arden, NC • 1d ago

IT & Engineering

Description REQUIRED:Project Engineer, Manufacturingfor Linamar North Carolina, Inc. (Arden location) who will play an integral part in the corporations product engineering group by fully understanding the development, m...

1d ago

Go to Apply

Electrical Assembly Operator

Kelly Services • Fairview, NC • 3d ago

IT & Engineering

Feeling stuck? Put your career in motion with a great, new opportunity. Join the Kelly® team as an Assembly Operator to work at a leading manufacturer in the Aerospace industry in Fairview, NC . We're here every step of...

3d ago

Go to Apply

Supply Chain Technician

HCA Healthcare • Asheville, NC • 3d ago

IT & Engineering

Description Introduction Do you have the career opportunities as a Supply Chain Technician you want with your current employer? We have an exciting opportunity for you to join Mission Hospital which is part of the nation...

3d ago

Go to Apply

MANUFACTURING ENGINEER II

Brantner and Associates, Inc • Fairview, NC • 4d ago

IT & Engineering

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Manufacturing Engineering Teams a...

4d ago

Go to Apply

Advanced Supplier Quality Engineer

GE Aerospace • Asheville, NC • 1w ago

IT & Engineering

Job Description Summary Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, c...

1w ago

Go to Apply

MANUFACTURING TECHNICIAN III

Brantner and Associates, Inc • Fairview, NC • 1w ago

IT & Engineering

1w ago

Go to Apply

Lead CMC Manufacturing Engineer - Non-Conventional Machining

GE Aerospace • Asheville, NC • 1w ago

IT & Engineering

Job Description Summary The Lead CMC Manufacturing Engineer will be a process owner for non-conventional machining methods including EDM, Laser drilling, and Laser Ablation. The process owner will be responsible for anal...

1w ago

Go to Apply

Entry Level Field Technician

Actalent • Asheville, NC • 2w ago

IT & Engineering

Job Title: Engineer Technician I (Field Technician) Job Description This entry-level position is responsible for providing technical support to engineers on various projects and products. The role involves collecting, ma...

2w ago

Go to Apply

Advanced Lead Manufacturing CAD Engineer

GE Aerospace • Asheville, NC • 2w ago

IT & Engineering

Job Description Summary Digital Machining Solutions team standardizes, delivers and maintains lean digital manufacturing tools and services for the GE Aerospace sites utilizing state-of-the-art technologies to increase c...

2w ago

Go to Apply

Transportation Technician I

Johnson, Mirmiran, and Thompson Inc. • Candler, NC • 2w ago

IT & Engineering

Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,400 professionals that provides a full range of multi-disciplined engineering, architecture, information technology, and r...

2w ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.