Mechanic

Allegheny Manufacturing and Electrical Service, INC • Johnstown, PA • 2d ago

Obtain written and/or verbal assignments from supervision or designated representative. Work from oral or written instructions, data sheets, sketches, L-specs etc.

Prepare requisitions and obtain parts and materials as required. Mechanically inspect and perform routine electrical tests on incoming equipment. Identify reason for failure, determine repairs required and complete inspection reports. Dismantle apparatus, mark and tag all parts with proper job numbers for re-assembly. Check fits and make necessary sketches. Steam clean and blast clean components where necessary. Perform a variety of mechanical repairs or adjustments to apparatus. Includes torch cutting, filing, drilling, tapping and/or re-tapping bolt holes, bearing assemblies etc. Measure and make up insulating materials such as; slot liners, ties, wedges, and phase insulation etc. Set up and operate coil machines to produce required coils for winding. Prepare core for winding, file and grind slots to remove fused copper or burn spots.

Assemble coils in rotor or stator slots according to data sheets and established practices. Insulate, wind and connect completely, tie down and final shape coil extensions to maintain proper clearances, solder and/or braze connections.

Perform necessary in-process tests such as, but not limited to, phase balance, megger, hi-pot etc.

Make repairs to windings and/or leads, reconnect apparatus.

Remove masking compounds or materials and/or varnishes from the apparatus.

Re-assemble completed apparatus for tests, use necessary equipment to obtain proper fits and alignments as specified by the customer or manufacturers specifications.

Perform necessary in-process and final tests, such as megger, hi-pot, phase, balance, and bearing temperature and noise levels. Insure that motors run freely at proper speed and current draw. Record test data as required. Polish shaft extension, paint and prepare for shipment.

Use all required safety equipment and follow all established safety procedures

Keep work area neat, clean and orderly to insure a safe work environment.

Similar Jobs

Commercial Roofing Laborer

Simon Roofing • Latrobe, PA • 4h ago

Manufacturing & Warehouse

Roofing Laborer/Apprentice: We are looking for Roofing Laborers/Apprentices to join our organization. If you are a person with a strong work ethic, and basic knowledge of roofing and/or construction, and want to become a...

4h ago

Go to Apply

Join TODAY: Entry Level | Fabrication Laborer | 16$/hr.| Start ASAP!!

Aerotek • Alum Bank, PA • 8h ago

Manufacturing & Warehouse

Apply now to secure you spot! Entry-Level | Fabrication Technicians Qualified for profiles will be contacted in next 48hrs.! ?? Location: Alum Bank, PA/ Pleasantville, PA ?? Schedule: 4 Days On / 4 Days Off ?? Type: Cont...

8h ago

Go to Apply

Join TODAY: Entry Level Assembler|18$/hr.| Start ASAP!!

Aerotek • Windber, PA • 8h ago

Manufacturing & Warehouse

Apply now to secure you spot Entry level - Assemblers positions in Johnstown & Winder! Qualified for profiles will be contacted in next 48hrs.! Shift: 1st Pay starts at 18/hr. Start Date: Immediate openings available...

8h ago

Go to Apply

Entry-level - Assembler Positions In Johnstown & Winder - $18-19/Hour

Aerotek • Windber, PA • 8h ago

Manufacturing & Warehouse

Apply now to secure your spot Entry-level - Assembler positions in Johnstown & Winder! Qualified profiles will be contacted in the next 48hrs.! Shift: 1st Pay starts at 18/hr. Start Date: Immediate openings available...

8h ago

Go to Apply

Warehouse - Plymouth, IN

The Hershey Company • Indiana, Indiana • 1d ago

Manufacturing & Warehouse

Location: Plymouth, IN We are mixing up something new in Plymouth, IN. This is an exciting time to join our team. We hold ourselves to the highest of quality standards. Each bag of Dot's Pretzels tastes as if they were m...

1d ago

Go to Apply

Experienced CNC Machinists

JWF Defense Systems • Johnstown, PA • 2d ago

Manufacturing & Warehouse

Shift Hours Various shifts available. Job Description JWFI is a growing metal manufacturing company, continuing to expand into defense & other markets with long-term work. We're looking to interview experienced CNC M...

2d ago

Go to Apply

2nd Shift Forklift Operator

Central States Manufacturing • Claysburg, PA • 3d ago

Manufacturing & Warehouse

Description Come be an Employee-Owner of one of the nation's largest producers of metal roofing and siding! We sell, manufacture, build, and distribute metal building components and packages. Since 1988 we've grown to ov...

3d ago

Go to Apply

Assembler - Crashworthy

Martin-Baker America, Inc. • Johnstown, PA • 5d ago

Manufacturing & Warehouse

Apply online at: https://martinbakeramerica.isolvedhire.com Questions? Email: hr@m-bamerica.com ??? We're Hiring: Assemblers ??? ??Martin-Baker America, Johnstown, PA | ?? Full-Time | ?? 2+ Years Experience Required Are...

5d ago

Go to Apply

Assembly Worker

ManpowerGroup • Indiana, Indiana • 5d ago

Manufacturing & Warehouse

Our client is seeking an Assembly Worker for a 6 month to 1 year contract in Jeffersonville, IN. Job Title: Assembly Worker (part-time Mon-Fri 10am-3pm) Location: Jeffersonville, IN Pay Range: $15-18/hour Job Title: Asse...

5d ago

Go to Apply

Join TODAY: Entry Level Assembler - 18$/hr. Start ASAP!!

Aerotek • Windber, PA • 5d ago

Manufacturing & Warehouse

5d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.