Electrical Technician

APTIM • Findlay, OH • 1d ago

Job Overview:

Successful candidate will perform a wide variety of electrical tasks including building control and motor control panels, mounting panels to skids, running conduit and wire to panels and instrumentation on skids and termination testing. Must be skilled in the use of hand and power tools and familiar with 480v, 120v and 24v power and control systems. Typically 2 years and above documented field experience in electrical discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Other duties as assigned.

Key Responsibilities/Accountabilities:

Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints ensuring that wiring is installed before completion of closed areas.

Measure, cut, bend, thread, assemble and install electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders.

Pulls wiring through conduit, assisted by helper.

Splices wires following company and customer requirements.

Connect wiring to equipment using hand tools.

Install control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fasten in place with crews or bolts using hand or power tools.

Connect power cables to equipment and installs grounding leads.

Test continuity of circuit to ensure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope.

Observe functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement.

Disassemble and repair defective electrical equipment or systems.

Load, transport and unload material, tools, equipment and supplies.

Maintain tools and equipment.

Be able to distinguish colors.

Work within precise limits or standards of accuracy.

Make decisions based on measurable criteria.

Apply basic mathematics to solve problems.

Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Basic Qualifications:

May require a high school diploma or its equivalent with 2 previous years of experience in the field or in a related area.

Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job.

Works under immediate supervision.

Primary job functions do not typically require exercising independent judgment.

Typically reports to a supervisor or manager.

2 or more years of experience as an industrial electrician.

Familiar with NEC and NFPA 70 E Codes.

Perform maintenance or cleaning activities of tools and equipment.

Respiratory protection is common and may be required.

Required to pass employer performance tests or standard tests to meet certification standards.

Visualize objects in three dimensions from plans and drawings.

Compare and see differences in the size, shape and form of lines, figures and objects.

Shop works four 10 hour shifts per week, Mon-Thurs. 6:00 AM to 4:30 PM. Overtime may be required.

ABOUT APTIM

APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence.

What you can expect from APTIM:

Work that is worthy of your time and talent

Respect and flexibility to live a full life at work and at home

Dogged determination to deliver for our clients and communities

A voice in making our company better

Investment into your personal and professional development

As of the date of this posting, a good faith estimate of the current pay range for this position is $25- $28 per hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM.

Employee Benefits

APTIM Corp is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace https://aptim.makeityoursource.com/ .

Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location.

Life insurance

Short-term and long-term disability insurance

Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law)

401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here:

APTIM 2025 401(k) Plan Features (makeityoursource.com) (https://aptim.makeityoursource.com/getattachment/eaa3a0a0-e46b-447b-b8b7-18f2fbf26eae/APTIM-401k-Plan-Features.pdf)

APTIM - Helpful Documents

LI-ONSITE #LI-BN1

Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may make their request known by e-mailing HRQuestions@cbifederalservices.com or calling 855.343.5600 for assistance.

EOE/Vets/Disability

APTIM

Go to Apply

Share this job

Similar Jobs

2025 Electrical Apprentice Signal Trainee (Findlay, OH)

Norfolk Southern • Findlay, OH • 2h ago

IT & Engineering

2025 Electrical Apprentice Signal Trainee (Findlay, OH) Apply now » Date: Sep 4, 2025 Location: Findlay, OH, US, 45840Findlay, OH, US, 45840 Company: Norfolk Southern Corp. Requisition 39169: 2025 Electrical Apprentice S...

2h ago

Go to Apply

Intern/Co-op - Information Technology (Fall 2026)

Marathon Petroleum Corporation • Findlay, OH • 5d ago

IT & Engineering

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. An e...

5d ago

Go to Apply

Electrical/Hydraulic Technician

Whirlpool Corporation • Findlay, OH • 1w ago

IT & Engineering

Requisition ID: 68728 ABOUT WHIRLPOOL CORPORATION Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, in constant pursuit of improving life at home and inspiring generations with our bra...

1w ago

Go to Apply

Intern/Co-op - Refining Mechanical Engineer (Summer 2026)

Marathon Petroleum Corporation • Findlay, OH • 1w ago

IT & Engineering

1w ago

Go to Apply

Intern/Co-op - Refining Mechanical Engineer (Fall 2026)

Marathon Petroleum Corporation • Findlay, OH • 1w ago

IT & Engineering

1w ago

Go to Apply

Intern/Co-op - Refining Electrical Engineering (Summer 2026)

Marathon Petroleum Corporation • Findlay, OH • 1w ago

IT & Engineering

1w ago

Go to Apply

Intern/Co-op - Refining Electrical Engineering (Fall 2026)

Marathon Petroleum Corporation • Findlay, OH • 1w ago

IT & Engineering

1w ago

Go to Apply

Technical Development Supervisor (Job Code: 1028)

FREUDENBERK-NOK GENERAL PARTNERSHIP • Findlay, OH • 1w ago

IT & Engineering

Responsible for providing engineering support to customers and sales on technical, design, and commercial issues and opportunities on products targeted for growth in America; develop and implement new proprietary product...

1w ago

Go to Apply

Intern/Co-op - Information Technology (Summer 2026)

Marathon Petroleum Corporation • Findlay, OH • 3w ago

IT & Engineering

3w ago

Go to Apply

Tool Setter

Aerotek • North Baltimore, OH • 13h ago

Job Title: Tool Setter, ~$24 Job Description The Tool Setter will be responsible for setting up molds and dies, completing mold and die changes, and overseeing cycle times. This role involves using various hand and power...

13h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.