Electro-Mechanical/Manufacturing Engineer

SECHAN ELECTRONICS INC • Lancaster, PA • 2h ago

Reference #: TT30216 Sechan Electronics is committed to the development, testing and manufacturing of military defense electronics systems and subsystems for the Department of Defense and Prime Contractors. As a leading Department of Defense contractor, our dedication to excellence has made us one of the most respected electronic manufacturers in the industry.

The Electro-Mechanical/Manufacturing Engineer I provides real time, in-process manufacturing engineering support for supervisors and operators actively engaged in electro / mechanical assembly operations.

Position Responsibilities: Develop Automated Machine programs for equipment such as SMT pick and Place, Automated Optical Inspection, Automated Soldering, and Flying Probe Test Equipment. Ability to diagnose and repair equipment such as SMT pick and Place, Automated Optical Inspection, Automated Soldering, and Flying Probe Test Equipment. Ability to understand and troubleshoot electronic circuits from a manufacturing standpoint. Circuit board production involves knowledge skillsets from the following disciplines -- Electronics / Technology, Mechanical, Chemistry, Heat transfer, Software / Programming. You need not be the subject matter expert in all of these but the ability to understand them is needed. Develops detail work instructions and production routers based on a thorough evaluation and clean understanding of the technical data package (TDP) provided by the customer. Provides manufacturing engineering oversight for First Piece audits as required by manufacturing operating procedures. Evaluates, develops, and recommends manufacturing processes and process instructions by conducting initial assessment of assembly issues during assembly. Reviews suggested changes with appropriate manufacturing engineer, supervisor and assembler. Redlines work instructions to correct any errors or provide clarification. Coordinates with the appropriate manufacturing engineer to ensure edits are incorporated into official documents. Improves manufacturing efficiency by working on the production floor to identify and design fixtures and tooling to aid assembly operators and to assist supervisors in specific actions to reduce assembly time. Provides documentation support during new product release and subsequent contract release by participating in activities that support bill of material maintenance, engineering change orders, and rework routers when required. Conduct analysis on TDP to determine corrective actions when necessary. Generate Engineering Change Requests ECRs Implement Engineering Change Order (ECO) and rework instructions Perform other duties as assigned to drive the vision, fulfill the mission, and abide by the values of this organization.

Skills & Abilities: Understanding of lean manufacturing, synchronous flow manufacturing, and work balancing Understanding of manufacturing methods and procedures CAD or similar software platform CAD/CAM Circuit Design or similar software Possesses attention to detail and problem solving skills Ability to work independently and as a team player Good verbal and written communication and interpersonal skills Demonstrated ability to work in a complex contract manufacturing environment with constantly changing customer demands including a vertically integrated assembly environment with circuit card assembly, wire harness, chassis build requiring integration of multi-level sub assembly.

Qualifications: Associates Degree in Electronics or Mechanical or similar(Bachelors Preferred) 1 years of experience on a manufacturing engineering team, preferably in a related industry, or in a similar environment of high mix/low volume production. Experience with translating Mechanical drawings contained in the TDP to operational instructions. Ability to obtain and maintain a DoD Security Clearance

Work Environment: Office and Manufacturing floor; Requires physical capability to work up to 9 hours a day including; sit, stand, walk, stoop, kneel, crouch, ability to lift up to 50 lbs. Hours: 6:30 AM -- 4:00 PM Monday -- Thursday; Friday 6:30 AM -- 3:00 PM with additional hours as needed to meet demand. Occasional off-shift hours may also be required to provide support to operations. 9/80 work schedule.

Equal Opportunity Employer/Veterans/Disabled

Similar Jobs

Electrical Engineer I

SECHAN ELECTRONICS INC • Lititz, PA • 2h ago

IT & Engineering

Reference #: EEI0291 Sechan Electronics is committed to the development, testing and manufacturing of military defense electronics systems and subsystems for the Department of Defense and Prime Contractors. As a leading...

2h ago

Go to Apply

VP, Mechanical Design & Engineering

TAIT Towers • Lititz, PA • 3d ago

IT & Engineering

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock...

3d ago

Go to Apply

Senior Electrical Engineer

CDM Smith • Lancaster, PA • 1w ago

IT & Engineering

42316BR Requisition ID: 42316BR Business Unit: TSU Job Description: We are seeking a licensed Electrical Engineer (PE) with strong design expertise and project management experience to lead federal infrastructure, water/...

1w ago

Go to Apply

Capital Projects Engineer

Graham Packaging Company • Lancaster, PA • 1w ago

IT & Engineering

Company Statement Graham Packaging is a people, planet and values-based company and a leader in sustainable packaging manufacturing. From the kitchen to the laundry room, Graham Packaging is part of your everyday life. F...

1w ago

Go to Apply

Manufacturing Technician I

Advanced Cooling Technologies Inc • Lancaster, PA • 2w ago

IT & Engineering

Description ACT pioneers innovative heat transfer technologies that shape the future of electronics, aerospace, medical, military capabilities, and renewable energy. With a commitment to innovation, Advanced Cooling Tech...

2w ago

Go to Apply

Lead Manufacturing Engineer

Advanced Cooling Technologies Inc • Lancaster, PA • 3w ago

IT & Engineering

Description Advanced Cooling Technologies, Inc. (ACT) is a premier thermal management solutions company. We serve diverse markets including Defense, Aerospace, HVAC, Power Electronics and Medical. ACT is strongly committ...

3w ago

Go to Apply

Residential Relationship Specialist II

Ephrata National Bank • Leola, PA • 1h ago

This position is responsible for providing diversified support to the process of originating residential mortgage loans. The Residential Relationship Specialist II (RRS II) will assist the Mortgage Experts with customer...

1h ago

Go to Apply

Accounts Receivable Specialist - Lancaster, PA

Staffing Service USA • Lancaster, PA • 1h ago

Finance, Accounting & Banking

Accounts Receivable Specialist -- Lancaster, PA We're looking for a reliable and detail-oriented Accounts Receivable Specialist to join our AR team in Lancaster, PA. This role is ideal for someone who thrives in a fast-p...

1h ago

Go to Apply

Financial Accountant

Fulton Bank • Lancaster, PA • 1h ago

Finance, Accounting & Banking

Financial Accountant Job Locations US-PA-Lancaster | US-NJ-Mt Laurel | US-PA-Wyomissing | US-DE-Georgetown Requisition ID 2025-22510 Location Name Corporate Headquarters County Lancaster Category Finance/Accounting Posit...

1h ago

Go to Apply

Financial Center Assistant Manager

Northwest Bank • Columbia, PA • 1h ago

Retail & Hospitality

Reference #: R-100911 Job Description DESCRIPTION As a Financial Center Assistant Manager, you will be responsible for assisting the Financial Center Manager in overseeing daily operations, managing staff, and ensuring e...

1h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.