Back to Jobs search

CNC Machinist Okuma Lathe and Mill Turn - 2nd Shift 10% shift pay and $1,500 sign on bonus

ARUNDEL MACHINE • Newtown, CT • 14h ago

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Interprets blueprints, sketches, drawings, manuals, specifications, routing, inspection and setup requirements.

Selects, aligns, and secures holding fixtures and accessories on machines.

Selects, aligns, and secures cutting tools into tool holders and then installs tool assemblies on machines.

Loads and secures raw material on machine.

For manual operations, calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut.

For CNC operations, retrieves current revision machine control program and downloads to machine.

Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required.

Unloads finished machined part from machine and deburrs as necessary to perform quality checks.

Verifies conformance of finished workpiece to specifications manually or through the use of a CMM / DCC-CMM. Enters required data into quality documentation and signs as required.

Performs daily housekeeping and maintenance on assigned machine, auxiliary equipment, tooling and work area.

Confers with engineers, programmers, inspectors, or maintenance personnel to resolve machining or assembly problems.

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.

Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education/Experience:

High school diploma or general education degree (GED); VoTech Trade school graduate preferred.

Completed a machining related apprenticeship program or 3-5 years equivalent combination of education and experience.

Language Ability:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Math Ability:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to compute rate, ratio, and percent and to interpret bar graphs

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.

Computer Skills:

Possess Basic Computer skills.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception.

ADDITIONAL NOTES

ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

ARCH123

Similar Jobs

Manufacturing Supervisor 2nd Shift

Actalent • Danbury, CT • 5d ago

Manufacturing & Warehouse

Production Supervisor Location: Danbury, CT Shifts Available: 2nd Shift: 3:30 PM - 10:30 PM 3rd Shift: 10:30 PM - 7:00 AM About the Role We are seeking experienced and motivatedProduction Supervisorsto lead manufacturing...

5d ago

Go to Apply

Assembler 1

Belimo • Danbury, CT • 1w ago

Manufacturing & Warehouse

Belimo is a global leader in the development, production and marketing of actuator solutions for controlling heating, ventilation and air conditioning systems. Actuators, control valves and sensors make up the company's...

1w ago

Go to Apply

Supply Chain Planner (Hybrid)

Belimo • Danbury, CT • 1w ago

Manufacturing & Warehouse

Belimo is the global market leader in the development, production, and marketing of field devices for the energy-efficient control of heating, ventilation and air conditioning systems. Damper actuators, control valves, s...

1w ago

Go to Apply

Warehouse Worker

Stanley Black and Decker • Danbury, CT • 2w ago

Manufacturing & Warehouse

STANLEY® Engineered Fastening is the global leader in precision fastening and assembly solutions, with a history spanning nearly 100 years. Our portfolio features industry-leading brands such as Avdel®, Integra, Nelson®,...

2w ago

Go to Apply

Warehouse Driver

KONE, Inc • Trumbull, CT • 2w ago

Manufacturing & Warehouse

Founded in 1910, KONE ( https://www.kone.com/en/ ) is a global leader that provides elevators, escalators and automatic building doors, as well as solutions for maintenance and modernization that add value to buildings t...

2w ago

Go to Apply

Warehouse Lead

TEKsystems • Oxford, CT • 2w ago

Manufacturing & Warehouse

Job Title: Warehouse Lead Location: Oxford, CT Hours: Monday - Friday, 8:00 AM - 4:30 PM Job Summary: We are seeking a reliable and experienced Warehouse & Delivery Associate to manage day-to-day operations in a ware...

2w ago

Go to Apply

Warehouse Specialist

TEKsystems • Oxford, CT • 2w ago

Manufacturing & Warehouse

Warehouse Lead Location: Oxford, CT Schedule: Monday through Friday, 8:00 AM to 4:30 PM Duration: 6-month contract-to-hire Overview: We're seeking a dependable and proactive individual to serve as the Warehouse Lead. Thi...

2w ago

Go to Apply

Electrician Instructor

Lincoln Technical Institute • Shelton, CT • 3w ago

Manufacturing & Warehouse

Join Lincoln Tech in Shelton, CT as we seek Electrician Instructors for our Electrical and Electronic Systems program! If you're passionate about educating and inspiring the next generation of professionals, we want to h...

3w ago

Go to Apply

Quality Inspector - Incoming Receiving

DRS Naval Power Systems, INC • Danbury, CT • 3w ago

Manufacturing & Warehouse

Job ID: 112096 The Leonardo DRS Naval Power Systems business is a trusted provider of innovative naval gas and hybrid power systems, control technology and support solutions for the U.S. Navy and navies around the world....

3w ago

Go to Apply

Customer Service Manager

Eaton Corporation • Bethel, CT • 11h ago

Management & Administrative

Eaton's IS AER FED division is currently seeking a Customer Service Manager. This position will be located at our Bethel, CT facility. The Customer Service Manager is responsible for managing the site customer service te...

11h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.