Electrical Hardware Design Engineer

Ralliant • Spartanburg, SC • 4h ago

Anderson-Negele is seeking a hands-on Electrical Hardware Design Engineer in Spartanburg, SC who has taken electronic products from a blank schematic to a certified, shipping industrial product. You will own the hardware for new hygienic sensors and measurement systems end to end: architecture, schematics, PCB layout and routing (done yourself), board bring-up, and UL, CSA, CE and EMC certification. Our products run 24/7 in food, beverage and pharmaceutical plants, so we need someone who designs for compliance from day one.

Key Responsibilities

New product design, concept to production

Own new product electronics from a clean sheet: requirements, architecture, component selection, schematics, proto@types and production release

Design analog, mixed-signal, power and microcontroller circuits for industrial sensing (RTD/NTC, 4-20 mA, HART, industrial I/O), with simulation, worst-case analysis and derating

Lead and participate in schematic and PCB design reviews

PCB layout and routing (hands-on ownership)

Personally lay out and route your boards; layout is not handed off to another group or service bureau

Own the PCB end to end: placement, stack-up, multilayer routing (mixed-signal, power, high-voltage, controlled impedance), libraries, design rules and fab/assembly outputs

Work with fabricators and contract manufacturers on DFM, DFT, Gerber/BOM reviews, proto@type builds and production ramp-up

Design for compliance and certification

Design to UL, CSA and CE (LVD, EMC, RoHS) from the first schematic, applying UL/IEC 61010-1 safety rules (creepage, clearance, isolation, fault conditions) and IEC 61326-1 / IEC 61000-4-x immunity

Run pre-compliance testing, work with third-party labs (UL, CSA, TÜV, Intertek) through certification, and maintain technical files and critical component lists

Validation, sustaining and collaboration

Bring up and validate new boards using oscilloscopes, spectrum, logic and power analyzers; write and execute DVT plans, including environmental testing

Support the manufacturing production floor as part of sustainment: be on hand to resolve build and test issues, assist with troubleshooting, and lead root cause analysis of hardware, manufacturing and field failures

Drive reliability, cost and obsolescence redesigns while protecting existing UL/CSA/CE listings

Work closely with mechanical, firmware, manufacturing, quality and product management, and communicate design intent to vendors and certification bodies

Required Qualifications

BS in Electrical Engineering (MS preferred) and 5+ years of hands-on hardware design on industrial or similarly regulated products

Proven ownership of at least two electronic products from concept through production, designed from scratch rather than modified

Hands-on PCB layout and routing: you have personally routed multilayer boards that went into production (Altium, KiCad or similar)

Direct experience taking a product through UL, CSA and/or CE certification, including resolving safety and EMC findings with test labs

Working knowledge of safety (UL/IEC 61010-1, UL 508, IEC 62368-1) and EMC (IEC 61326-1, IEC 61000-4-x, CISPR 11) standards

Strong grasp of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection (ESD, surge, transients)

Experience with board bring-up, debugging, lab instrumentation, and PCB/contract manufacturers

Be ready to walk us through a product you designed, layouts you routed, and the certifications it earned

Preferred Qualifications

Industrial instrumentation or sensor experience (temperature, pressure, level, flow, weighing)

Industrial protocols: 4-20 mA/HART, IO-Link, Modbus, PROFINET or EtherNet/IP

Hygienic processing environments (food, beverage, pharma; 3-A, EHEDG) and harsh[1]environment design (washdown, IP67/IP69K)

Hazardous location (ATEX/IECEx, Class I Div 2), functional safety (IEC 61508), or MID/NTEP experience

RF, wireless or IoT connectivity with FCC/RED compliance

Experience leading design reviews or mentoring engineers

LI-MW1

Ralliant Corporation Overview

Ralliant, originally part of Fortive, now stands as a bold, independent public company driving innovation at the forefront of precision technology. With a global footprint and a legacy of excellence, we empower engineers to bring next-generation breakthroughs to life - faster, smarter, and more reliably. Our high-performance instruments, sensors, and subsystems fuel mission-critical advancements across industries, enabling real-world impact where it matters most. At Ralliant we're building the future, together with those driven to push boundaries, solve complex problems, and leave a lasting mark on the world.

About Anderson-Negele

Anderson-Negele is an instrumentation company whose mission is to provide the best hygienic instrumentation solutions for processors of food, beverage and life sciences products. We have manufacturing facilities in the US and Germany and sales & service offices in the U.S., Europe, China, India, and Brazil.

We Are an Equal Opportunity Employer. Ralliant Corporation and all Ralliant Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Ralliant and all Ralliant Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at applyassistance@Ralliant.com.

Bonus or Equity

This position is also eligible for bonus as part of the total compensation package.

Pay Range

83,400 to 155,000

Similar Jobs

Electrical Tester - Daylight (4x10's)

Eaton Corporation • Jonesville, SC • 2d ago

IT & Engineering

Eaton's ES AMER ESS division is currently seeking a Electrical Tester - Daylight (4x10's) to join our brand new team in Jonesville, SC! This is a daylight position that will work 4, 10-hour shifts from 5 am - 3:30 pm, Mo...

2d ago

Go to Apply

Data Specialist

Robert Half • Simpsonville, SC • 3d ago

IT & Engineering

Description We are looking for a detail-oriented Data Specialist to support operations through accurate reporting, data analysis, and cross-functional coordination in South Carolina. This contract position with permanent...

3d ago

Go to Apply

Mechanical Engineer

Staubli Corporation • Duncan, SC • 5d ago

IT & Engineering

Mechanical Engineer (Duncan, South Carolina): Provides strategic mechanical engineering assistance for the development and production of robotic engineering development and related business initiatives.Coordinates and ov...

5d ago

Go to Apply

Mechanical Engineer IV

Wabtec Corporation • Duncan, SC • 6d ago

IT & Engineering

Job Description Who will you be working with? As a Mechanical Engineer IV within Wabtec Passenger Transit (WPT) Engineering, you will apply mechanical engineering knowledge to the design, development, validation, and sus...

6d ago

Go to Apply

Associate Manufacturing Engineer

Eaton Corporation • Jonesville, SC • 6d ago

IT & Engineering

Eaton's ES AMER ESS division is currently seeking a Associate Manufacturing Engineer. This role is located Jonesville, SC facility. Relocation assistance will be provided. The expected annual salary range for this role i...

6d ago

Go to Apply

Electrical Test Engineer II

Actalent • Fountain Inn, SC • 1w ago

IT & Engineering

Job Title: Electrical EngineerJob Description We are seeking a dedicated Electrical Engineer to troubleshoot inverter systems that fail production testing or are returned from the field. You will be responsible for perfo...

1w ago

Go to Apply

Electrical Design Engineer

Actalent • Spartanburg, SC • 1w ago

IT & Engineering

Job Title: Electrical Design Engineer / CAD OperatorJob Description This role focuses primarily on using AutoCAD to modify existing electrical designs and support production through schematic updates and limited hands-on...

1w ago

Go to Apply

Senior Advanced Manufacturing Engineer

Honeywell Aerospace • Greer, SC • 1w ago

IT & Engineering

As a Senior Advanced Manufacturing Engineer at Honeywell Aerospace, you will serve as a technical leader responsible for driving key manufacturing processes within aerospace component production. This role plays a critic...

1w ago

Go to Apply

Senior Software Engineer

Actalent • Simpsonville, SC • 1w ago

IT & Engineering

Experienced Software Engineer Job Description Experienced Software Engineer develops and maintains automated test software, reporting tools, and database solutions that support production and engineering test systems. Th...

1w ago

Go to Apply

Advanced Mfg Engineer Sr

Honeywell Aerospace • Greer, SC • 1w ago

IT & Engineering

As an Advanced Manufacturing Engineer Senior here at Honeywell Aerospace, you will play a critical role in driving innovation and continuous improvement in our manufacturing operations. You will be responsible for develo...

1w ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)