Electrical Engineer 3

Hologic • Newark, DE • 4h ago

Newark, DE, United States

Job Summary

Designs, develops, modifies, and evaluates components and processes used in the generation, manipulation, transmission, and storage of electricity. Determines design approaches and parameters. Analyzes equipment to establish operating data, conducts experimental testing, and evaluates results. Selects components and equipment based on specifications, performance, and reliability requirements. Completes documentation and procedures for installation and maintenance activities. May interact with users to define system requirements and identify necessary modifications.

Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Demonstrates sound judgment in selecting methods and techniques for obtaining solutions. Networks with senior internal and external personnel within their area of expertise.

Possesses a full understanding of the area of specialization and resolves a wide range of issues in creative and practical ways. This is a fully qualified, career-oriented professional position that typically receives little instruction on day-to-day work and general guidance on new assignments.

Essential Duties and Responsibilities

The incumbent may be asked to perform other function-related activities in addition to those listed below, as reasonably required by business needs.

Performs complex experiments that may require support and coordination of other engineers or technicians.

Actively participates in R&D projects by providing design input and ensuring projects can be translated into cost-effective production processes. Supports R&D in developing cost estimates for equipment, tools, and components.

Responsible for the manufacturing performance of assigned product line(s).

Establishes fabrication and assembly procedures to support product manufacturing. Develops methods and tooling requirements for new and existing processes and assists in the design of tooling and fixtures.

Initiates and/or approves changes in design, drafting, tooling, methods, processes, and documentation that impact manufacturing operations.

Oversees the creation and revision of standard operating procedures (SOPs), organizational standards, and directives related to scheduling, cost control, and production performance evaluation. Develops, verifies, and validates manufacturing processes.

Supports the maintenance of production equipment and collaborates with Facilities on the implementation of predictive maintenance programs.

Identifies, diagnoses, prioritizes, and resolves technical issues that arise during manufacturing operations. Partners with cross-functional teams as needed.

Evaluates and develops process control data for trending and analysis. Investigates defects, provides feedback, and implements process improvements.

Participates in design reviews and collaborates with R&D and Manufacturing teams to resolve issues, particularly those involving design standard violations or changes to existing manufacturing procedures.

Actively supports and adheres to the company's Quality Policy and Quality System procedures.

Conducts process analyses and leads activities including Defect Reviews, Kaizen Events, and Process Improvement initiatives to improve manufacturing efficiency, product quality, and operational effectiveness.

Manages multiple projects independently.

Qualifications

Education

Bachelor's degree in Engineering or a related technical discipline preferred.

Advanced technical degree (Master's or PhD) preferred.

Experience

Typically requires 5 to 8 years of relevant experience with a non-technical degree.

Typically requires 2 to 5 years of experience with a Bachelor's degree, 1 to 3 years with a Master's degree, or 0 to 1 years with a PhD.

Experience with schematic capture and PCB layout software.

Automation experience, including implementation of automated manufacturing cells or production lines.

Experience in an FDA-regulated medical device environment is highly desirable.

Experience supporting rapid scale-up of new products or manufacturing operations is beneficial.

Skills and Competencies

Advanced proficiency with Microsoft Office applications.

Strong written, verbal, and interpersonal communication skills.

Excellent organizational and time management skills.

Ability to read, interpret, and create technical drawings.

Working knowledge of manufacturing, quality improvement, and cost reduction methodologies, including Lean Manufacturing, Root Cause Analysis, Root Cause Failure Analysis, TQM, SPC, and Six Sigma.

Ability to develop and lead corrective action plans.

Proven ability to work effectively as both an independent contributor and collaborative team member.

Self-motivated with a strong sense of initiative.

Understanding of electronic design, medical device design, analog and digital circuit design, PCB design, software systems, optics, and human factors engineering.

Knowledge of IEC 60601-1 and IEC 60601-2 standards.

Leadership and team development experience is a plus.

Prior people management experience is beneficial.

Lean Six Sigma Green Belt certification is preferred.

Compensation

The annualized base salary range for this role is $98,500 to $154,000 and the position is eligible for an annual bonus. Final compensation will be determined based on factors including experience, skills, education, location, business needs, and market conditions.

Agency and Third-Party Recruiter Notice

Agencies that submit resumes to Hologic must have a current, fully executed Hologic Agency Agreement approved by the Human Resources Department. Agencies may only submit candidates for positions when specifically authorized to do so by a Hologic Recruiter. Resumes submitted outside of these terms will not be considered.

Equal Opportunity Employer

Hologic is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

LI-JW2

This position must comply with all applicable FDA regulations and ISO requirements.

Hologic is an equal opportunity employer inclusive of female, minority, disabled, and veteran individuals (F/M/D/V).

Hologic

Go to Apply

Share this job

Similar Jobs

Mechanical Engineer - Energy Solutions

CMTA, Inc • Media, PA • 2h ago

IT & Engineering

CMTA, a Legence company CMTA ( https://www.cmta.com/ ) is one of the fastest growing engineering firms in the U.S., with nationally recognized expertise in sustainable, high-performance building engineering. We are a col...

2h ago

Go to Apply

Senior Mechanical Engineer - Energy Solutions

CMTA, Inc • Media, PA • 2h ago

IT & Engineering

2h ago

Go to Apply

Data Scientist - Technology and Enterprise Operations First Line Risk

M&T Bank • Wilmington, DE • 5h ago

IT & Engineering

This role is four days onsite at our Wilmington, DE location, with the flexibility to work from home one day per week Overview: Leads the development of data-driven insights through advanced analytics, process automation...

5h ago

Go to Apply

Intern - Engineering Tech Ops

Energy Transfers Partners, L.P. • Marcus Hook, PA • 9h ago

IT & Engineering

Energy Transfer is a master limited partnership that owns and operates one of the largest and most diversified portfolios of energy assets in the United States. In total, the Company owns and operates approximately 120,0...

9h ago

Go to Apply

Manufacturing Engineer

Dwyer Instruments, Inc. • Swedesboro, NJ • 1d ago

IT & Engineering

Job Type Full-time Description DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recog...

1d ago

Go to Apply

Mechanical Engineering Intern

Cleveland-Cliffs Steel, LLC • Coatesville, PA • 3d ago

IT & Engineering

Location: Coatesville, PA Cleveland-Cliffs takes pride in offering a variety of opportunities for students and new graduates who have an interest in the steel industry and a passion for innovation and sustainability. We...

3d ago

Go to Apply

R&D Machining Engineer

Coherent • Newark, DE • 3d ago

IT & Engineering

Summary Collaborates and works with Engineers and Technicians in the R&D group to manufacture new products from advanced ceramic and metal matrix composite materials. Activities include hands-on prototyping, CNC prog...

3d ago

Go to Apply

Electrical Engineering Intern

Cleveland-Cliffs Steel, LLC • Coatesville, PA • 3d ago

IT & Engineering

Location: Coatesville, OH Cleveland-Cliffs takes pride in offering a variety of opportunities for students and new graduates who have an interest in the steel industry and a passion for innovation and sustainability. We...

3d ago

Go to Apply

Senior Embedded Software Engineer

Hologic • Newark, DE • 3d ago

IT & Engineering

Senior Embedded Software Engineer Newark, DE, United States We're looking for a Senior Embedded Software Engineer to design, develop, and maintain embedded software for our next-generation breast and skeletal health syst...

3d ago

Go to Apply

Information Systems Security Engineer (ISSE)

CACI International • Aberdeen Proving Ground, MD • 3d ago

IT & Engineering

Job Title: Information Systems Security Engineer (ISSE) Job Category: Information Technology Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 10...

3d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)