Quality - Inspector

NewAge Industries, Inc. • Warrington, PA • 1h ago

Summary:

An Inspector is to maintain quality standards by inspecting incoming materials, in-process production, and finished products; recording quality results. This would be achieved by counting, measuring, and inspecting product to verify that it meets specification and requirements. This verification might entail checking the product against bill of ladings, invoices, inspection sheets and drawings.

Essential Duties and Responsibilities:

Being able to identify the different @types of NewAge and OEM products

To work with the Quality department management, on a daily basis, to identify what the workload is and what is required to meet the customer demands.

Completing incoming, in-process or final inspection against specifications and/or drawings for defects

Incoming/final inspections consisting of outside vendor products

incoming inspections consisting of all raw material compounds

In-process inspections for all inside manufactured products

Final inspections for all inside manufactured products

Recording inspection details and information for all inspections

Knowing and understanding what is required to complete the inspection sheets

Attaching identification tags onto product to make sure the status of the product is known

Record and document when product is defective or in question

Notifying the appropriate personnel that product is suspect and needs to be reviewed by management

Submitting Suspect Material (non-conforming) Reports and supporting documentation

Using and understanding the computer system for tracking this information

Continually monitoring and following up on existing nonconformities

Possibly unloading and unpacking incoming or outgoing shipments

Visually being able to identify if product is damaged or acceptable

Being able to determine the proper sample size needed to conduct an inspection

Making sure that all Quality department paperwork and documentation is stored properly.

Knowing and understanding where all the paperwork and documentation is stored.

Notifying the Quality department management of additional quality issues

An example would be if work instructions are not being followed, are no longer accurate or if equipment has been damaged or miss-reading information

Understanding what the clean room processes are and what the Quality functions are in these rooms

Knowing and understanding all testing requirements needed for the clean rooms

Supporting and participating in Environmental Monitoring

Creating product certifications

Able to calibrate simple inspection tools and schedule third parties for complex monitoring systems

Ability to maintain a positive, constructive attitude in a fast-paced environment

Strong written and oral communication skills as well as interpersonal aptitude needed

High degree or reliability, accuracy and integrity.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience:

High School Diploma or general education degree (GED); one or more years of related experience and/or training; or equivalent of combination of education and experience. ASQ certifications are a plus.

Language Skills:

The ability to read and interpret documents such as blueprints; material specifications; safety rules; operating, maintenance and work instructions; and procedure manuals; the ability to write routine reports and correspondence; the ability to speak effectively before groups or customers or employees of the organization.

Mathematical Skills:

Having the ability to add, subtract, multiply and divide in all units of measure; using whole numbers; common fractions and decimals. Also having the ability to compute rate, ratio and percent and to draw and interpret bar graphs.

Reasoning Ability:

Having the ability to apply common sense and understanding to carry out instructions furnished in written, oral or diagram form; while also having the ability to deal with problems involving several variables in standardized situations.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to use hands and fingers, handle, or feel and reach with hands and arms .The employee frequently is required to stand; walk; climb or balance; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit and talk or listen. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to wear safety shoes for the duration of the shift.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually loud and the temperatures will change, depending on the seasons.

We are an equal opportunity employer with a commitment to diversity. All individuals, regardless of personal characteristics, are encouraged to apply.

Please Note: NewAge only hires those who do not smoke or use tobacco or vaping products.

Similar Jobs

Industry Liaison (Oncology Studies)

System One • Philadelphia, PA • 1h ago

Manufacturing & Warehouse

Job Title: Industry Liaison (Oncology Studies) Location: Philadelphia, PA Type: Direct Hire Compensation: $145,000 - $160,000 Work Model: Hybrid - onsite and remote Hours: 40.0 Overview Drive strategic collaboration with...

1h ago

Go to Apply

CNC Machinist

B&G Manufacturing Co. • Hatfield, PA • 11h ago

Manufacturing & Warehouse

We are seeking skilled CNC Machinists who take pride in precision, safety, and producing quality parts right the first time. If you're experienced, dependable, and ready to join a stable, growing machine shop, we want to...

11h ago

Go to Apply

CNC Machinist (2nd shift)

B&G Manufacturing Co. • Hatfield, PA • 11h ago

Manufacturing & Warehouse

Looking for a quieter shift, strong earning potential, and a shop that values skilled machinists? Join our 2nd shift team and earn 15% shift differential on top of competitive base pay. We're seeking dependable CNC Machi...

11h ago

Go to Apply

Electro-Mechanical Assembler (Onsite - Horsham, PA) (Horsham, PA)

Elma Electronic • Horsham, PA • 1d ago

Manufacturing & Warehouse

Join Elma and help build high-reliability electro-mechanical products. In this hands-on role, you'll support assembly, calibration, and testing of electro-mechanical devices-combining wiring/harness work with mechanical...

1d ago

Go to Apply

warehouse janitorial cleaner

ABM Industries • Burlington, NJ • 2d ago

Manufacturing & Warehouse

Overview We are looking for a reliable and experienced Corrugate Tech?to maintain cleanliness and sanitation standards in building/facilities. This role involves operating specialized equipment, handling cleaning chemica...

2d ago

Go to Apply

WAREHOUSE ASSOC II - SSC

Mohawk Industries • Bensalem, PA • 2d ago

Manufacturing & Warehouse

Join the largest manufacturer of tile and natural stone in the United States and watch your career stand out with Dal-Tile, a subsidiary of Mohawk Industries. Our close-knit team of dedicated professionals has made us th...

2d ago

Go to Apply

HYDRAULIC PRESS OPERATOR - 1ST SHIFT

Mohawk Industries • Bensalem, PA • 2d ago

Manufacturing & Warehouse

2d ago

Go to Apply

DOT MOUNT LOADER - 2ND SHIFT

Mohawk Industries • Bensalem, PA • 2d ago

Manufacturing & Warehouse

2d ago

Go to Apply

Fabrication Supervisor & Manufacturing Specialist

ATS Automation • Souderton, PA • 2d ago

Manufacturing & Warehouse

ATS Company: ATS Corporation Requisition ID: 17669 Location: Souderton, PA, US, 18964 Date: Aug 21, 2026 Fabrication Supervisor & Manufacturing Specialist Fabrication Supervisor & Manufacturing Engineering Specia...

2d ago

Go to Apply

Warehouse Part Time Overnight

Lowe's • Havertown, PA • 3d ago

Manufacturing & Warehouse

Your Impact at Lowe's As a Receiver/Stocker, you help keep the store clean, safe, and ready for customers by accurately receiving freight, stocking shelves, and organizing merchandise and top stock. You'll unload deliver...

3d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)