Electrician II (EAP)

EPSILON SYSTEMS • Portsmouth, VA • 4h ago

Epsilon Systems is seeking a Full Time Electrician II for the Engineering and Advanced Products division located in Portsmouth, VA.

Summary : Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

Duties and Responsibilities:

Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.

Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.

Performs and/or verifies mechanical alignments.

Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.

Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).

Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.

Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).

Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).

Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.

Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.

Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.

Performs component and/or system troubleshooting to diagnose problems.

Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.

Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.

Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.

Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.

Troubleshoots motor controllers, control panels, and power distribution panels.

Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.

Assembles multi-pin connectors and fiber optic connections.

Installs and seats brushes for AC and DC motors / generators.

Completes inspection and resurfacing of commutators and slip rings.

Performs work outside of trade if necessary.

Required Qualifications

High school diploma or equivalent or vocational training.

At least 5 years' experience as a marine electrician.

Understands and is familiar with NAVSEA Standard items.

Follows NAVSEA Standard Items.

Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.

Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.

Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)

Communicates effectively, work independently or in a group.

Ability to do basic math, i.e. add, subtract, divide and multiply.

Ability to read, write, speak, and comprehend English.

Ability to obtain access to military and government installations worldwide.

Ability to travel required.

ADA Notations :

Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.

Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).

Able to lift, carry and move objects up to 50 lbs in weight.

Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.

Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Able to perceive and distinguish normal range of colors.

May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Similar Jobs

CNC Machinist

Kelly Services • Hampton, VA • 8h ago

Manufacturing & Warehouse

Build What Protects the Nation Kelly® is hiring an experienced CNC Machinist to support a high-precision, defense-focused manufacturing environment in Hampton, VA. If you thrive on tight tolerances, clean cuts, and solvi...

8h ago

Go to Apply

Welder/Fitter - 28307

HII • Chesapeake, VA • 19h ago

Manufacturing & Warehouse

Requisition Number: 28307 Required Travel: 11 - 25% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $44,808.00 - $58,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid This oppor...

19h ago

Go to Apply

Certified Blast and Painter (C7, C12, C14)

Riggins • Hampton, VA • 23h ago

Manufacturing & Warehouse

We are seeking a skilled and certified Blast and Painter to join our team. The ideal candidate will possess active certifications in C7, C12, and C14 and have hands-on experience in industrial blasting and painting. This...

23h ago

Go to Apply

WELDER/STRUCTURE (CERTIFICATION REQUIRED)

HII • Newport News, VA • 1d ago

Manufacturing & Warehouse

WELDER/STRUCTURE (CERTIFICATION REQUIRED) Location: Newport News, Virginia, United States Date: Jun 1, 2026 Req ID: 47273 Team: X18 WELDERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes...

1d ago

Go to Apply

FALL 2026 IT CO-OP

Huntington Ingalls Industries • Newport News, VA • 1d ago

Manufacturing & Warehouse

FALL 2026 IT CO-OP Location: Newport News, Virginia, United States Date: Jun 23, 2026 Req ID: 47958 Team: K21 TALENT ACQUISITION Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Part-Time...

1d ago

Go to Apply

DIR GENERAL MANUFACTURING 2 - VCS RPM

Huntington Ingalls Industries • Newport News, VA • 1d ago

Manufacturing & Warehouse

DIR GENERAL MANUFACTURING 2 - VCS RPM Location: Newport News, Virginia, United States Date: Jun 27, 2026 Req ID: 48031 Team: X80 VCS CONSTR MGMT Entity: Newport News Shipbuilding US Citizenship Required for this Position...

1d ago

Go to Apply

DIR GENERAL MANUFACTURING 2 - CVN 75 TOPSIDE

Huntington Ingalls Industries • Newport News, VA • 1d ago

Manufacturing & Warehouse

DIR GENERAL MANUFACTURING 2 - CVN 75 TOPSIDE Location: Newport News, Virginia, United States Date: Jun 27, 2026 Req ID: 48032 Team: X71 CVN 73 RCOH PROJ Entity: Newport News Shipbuilding US Citizenship Required for this...

1d ago

Go to Apply

Marine Welder - 28701

HII • Chesapeake, VA • 1d ago

Manufacturing & Warehouse

Requisition Number: 28701 Required Travel: 26 - 50% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $52,780.00 - $60,320.00 Security Clearance: Ability to Obtain Level of Experience: Mid This oppor...

1d ago

Go to Apply

Warehouse Associate I

EchoStar • Chesapeake, VA • 1d ago

Manufacturing & Warehouse

Company Summary EchoStar is reimagining the future of connectivity. Our business reach spans satellite television service, live-streaming and on-demand programming, smart home installation services, mobile plans and prod...

1d ago

Go to Apply

FALL 2026 DESIGNER CO-OP

Huntington Ingalls Industries • Newport News, VA • 1d ago

Manufacturing & Warehouse

FALL 2026 DESIGNER CO-OP Location: Newport News, Virginia, United States Date: Jun 15, 2026 Req ID: 47840 Team: E01 ENGRG & DESIGN Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Part...

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)