Construction Quality Manager - AZCO (Appleton)

AZCO • Appleton, WI • 17h ago

Description

The Construction Quality Manager is responsible for leadership, direction, management, and the execution of the company's Quality Program for projects in various locations. The Construction Quality Manager assures that installations comply with the applicable plans, codes, standards, specifications, and construction practices, including the timely completion and collection of inspection and test reports as required.

Establish and communicate project quality requirements to the project management team.

Collaborate with the project management team on the set-up and implementation of key processes and application methods.

Develop and issue Construction Quality Plan requirements including an inspection and test matrix based on specifications, codes, and jurisdictional requirements.

Responsible for coaching, training, and mentoring field quality personnel with regards to the Quality System including quality verifications required to comply with the specifications.

Responsible for recommendations, enhancements, and changes to the Quality System.

Confirm conditions adverse to quality are identified, documented, disposition, and tracked through acceptance and closure.

Support the Corrective Action resolution process.

Review and confirm compliance of subcontractor Quality submittals and Inspection and Test Plans (ITP's).

Confirm Welding Procedure Specifications (WPSs) and associated Procedure Qualification Records are reviewed and when required, developed by Weld Engineering.

Confirm and when required, perform welder performance qualifications to support the project.

Confirm WPSs are properly applied to the work and welders are qualified for the work as required by the specifications and code.

Proactively communicate quality opportunities with project sites that do not have day-to-day onsite quality support, including issues or concerns to the project management team.

Support project sites in confirming quality metrics are consistently tracked and reported.

Assist the project team with set-up and scheduling of Nondestructive Examination and heat treatment activities.

Confirm that project turn-over packages are populated and correspond to project activities.

Act as a liaison between the Project Manager and the Authorized Inspector for Code work scopes.

Perform site assessments and audits to confirm compliance with the implemented Quality System.

Comply with all Safety & Health requirements and monitors construction activities to ensure adherence to safety standards.

Participate in the Task Safety Observations (TSO's) process and define corrective measures for problem areas.

Manage the quality program at various field locations, to ensure project requirements and code regulations are being met and followed.

Responsible for the recruitment, development, training, and retention of staff.

Responsible for conducting performance evaluations for department staff.

Provide leadership, guidance, and instruction to the department.

Responsible for interpreting the organization's policies, purposes, and goals to staff.

Responsible for overall QA/QC process adherence.

Enforce compliance with company and site safety policies.

Performs other duties as assigned.

Complies with all policies and standards.

Qualifications

High School Diploma/GED and 11 years related experience managing and implementing quality related activities and processes required.

Or, Associate's degree in Engineering, Construction Management, Welding Technology, Nondestructive Examination, or related field and 9 years related experience managing and implementing quality related activities and processes required.

Or, Bachelor's degree in Engineering, Construction Management, Welding Technology, Nondestructive Examination, or related field and 7 years related experience managing and implementing quality related activities and processes required.

Thorough understanding of multidiscipline work scopes.

Must be detailed oriented.

Excellent planning and analytical skills.

Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.

Strong computer and technical writing skills.

Certified Welding Inspector-AWS required.

This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled.

EEO/Disabled/Veterans

Job Quality

Primary Location US-WI-Appleton

Schedule: Full-time

Travel: Yes, 75 % of the Time

Req ID: 260922

LI-MF #CDB N/A

AZCO

Go to Apply

Share this job

Similar Jobs

Dedicated Flatbed Truck Driver

Roehl Transport • Ashwaubenon, WI • 2h ago

Trucking & Construction

In this dedicated truck driving job, you'll mostly work for a single customer pulling van and roll-tarp system flatbed trailers. You will deliver to Michigan, Wisconsin, Minnesota, Iowa, South Dakota and Nebraska. You wi...

2h ago

Go to Apply

CDL Truck Driver

Roehl Transport • Oshkosh, WI • 2h ago

Trucking & Construction

You'll have predictable and consistent home time with a set schedule in our national Van 7/7 HOMEtime PLUS ( https://www.roehl.jobs/Driving-Jobs/Resources/hometime_plus ) fleet. This fleet offers a 7 days driving schedul...

2h ago

Go to Apply

Class B Truck Driver

AAA Cooper Transportation • Oshkosh, WI • 2h ago

Trucking & Construction

We are immediately hiring a local CDL Class B P&D city driver at our Oshkosh, WIservice center. Class B CDL P&D Driver Pay Range:$27.50-$33.19/hr Location: Oshkosh, WI Job Summary Pickup and Delivery (P&D) Dr...

2h ago

Go to Apply

Truck Driver Refrigerated OTR Fleet

Roehl Transport • Oshkosh, WI • 2h ago

Trucking & Construction

In our over-the-road National Refrigerated Fleet truck driving job, you'll haul cheese and other frozen or temperature controlled products in state-of-the-art trailers across 48 states and Canada. As you see the nation,...

2h ago

Go to Apply

CDL-A - Regional Van Truckload truck driver

Schneider • Appleton, WI • 1d ago

Trucking & Construction

Regional Van Truckload truck driver Average pay: $1,000-$1,100 weekly Home time: Every other week Experience: All CDL holders Overview Predictable power lanes with a high volume of freight. Consistent freight allows for...

1d ago

Go to Apply

CDL-A - Regional Van Truckload truck driver

Schneider • Oshkosh, WI • 1d ago

Trucking & Construction

1d ago

Go to Apply

Truck Driver on-the-job CDL Training

Roehl Transport • Neenah, WI • 2d ago

Trucking & Construction

On-the-Job CDL Training Program Truck Driving Job Make more of yourself and for yourself. If you qualify, Roehl Transport will pay you to get your CDL ( https://www.roehl.jobs/driving-jobs/cdl-truck-driving-schools ) &am...

2d ago

Go to Apply

CDL Delivery Truck Driver

McLane Company • De Pere, WI • 2d ago

Trucking & Construction

JOB REQUIREMENTS: Description Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America\'s favorite brands. Being reliable and dedicated to safety has defined our success as an indust...

2d ago

Go to Apply

Construction CDL Driver

FAHRNER ASPHALT SEALERS- APPLETON • Appleton, WI • 2d ago

Trucking & Construction

JOB REQUIREMENTS: Position Title: Construction CDL Driver Location: Appleton, WI Pay Range: N/A Application Instructions: To apply, click the green \'Apply Now\' button above. Please read through your information careful...

2d ago

Go to Apply

Construction Laborer

FAHRNER ASPHALT SEALERS- APPLETON • Appleton, WI • 2d ago

Trucking & Construction

JOB REQUIREMENTS: Position Title: Construction Laborer Location: Appleton, WI Pay Range: N/A Application Instructions: To apply, click the green \'Apply Now\' button above. Please read through your information carefully,...

2d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.