Summary Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: As a Mechanical Engineer serving in a developmental capacity, performs assignments designed to orient the employee in the application of academic theories and basic principles to mechanical engineering assignments. Position will be developmental to Mechanical Eng, GS-0830-09, then GS-0830-11, and then target grade of GS-0830-12. Responsibilities GS-0830-07 DUTIES Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer. Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work. Assists in coordinating projects with engineers in other disciplines or with architects. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-09 DUTIES Participates in design work for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW). Coordinates projects with other engineers in other disciplines or with architects. Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-11 DUTIES Monitors and manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of mechanical engineering and knowledge of other engineering disciplines to ensure overall compliance with contracted specifications, schedules, etc. Assists in planning and design process for new construction, renovations, and improvement projects for real property facilities and utility systems utilizing a professional knowledge of mechanical engineering. Evaluates/recommends programs and development plans and advocates for project requirements. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. GS-0830-12 DUTIES Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of mechanical engineering and knowledge of other engineering disciplines to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment. Requirements Conditions of Employment Qualifications In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-@type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE GS-0830-07: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-05, or equivalent in other pay systems. Examples of specialized experience includes experience in mechanical engineering concepts and principles as well as the ability to apply standard mechanical engineering practices, methods, and techniques to perform, following specific instructions, relatively routine projects or on a portion of a larger and more complex project. Experience in computer aided design and drafting (CADD) programs to perform routine design and drafting assignments. Familiarity with related engineering disciplines, particularly structural and electrical. OR EDUCATION: 1 full year of graduate level education or superior academic achievement. OR COMBINATION OF EXPERIENCE AND EDUCATION: may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. SPECIALIZED EXPERIENCE GS-0830-09: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-07, or equivalent in other pay systems. Examples of specialized experience includes experience in mechanical engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects. Experience of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Experience in installation/command mission and organization. OR EDUCATION: 2 full years of progressively higher-level graduate education leading to a master's or equivalent graduate degree. OR COMBINATION OF EXPERIENCE AND EDUCATION: may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. SPECIALIZED EXPERIENCE CONTINUED IN EDUCATION AREA FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-grade requirements to be considered eligible. One year at the GS-05 level is required to meet the time-in-grade requirements for the GS-07 level. One year at the GS-07 level is required to meet the time-in-grade requirements for the GS-09 level. One year at the GS-09 level is required to meet the time-in-grade requirements for the GS-11 level. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: CONTINUED IN EDUCATION PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Education SPECIALIZED EXPERIENCE CONTINUED IN FROM QUALIFICATIONS AREA SPECIALIZED EXPERIENCE GS-0830-11: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-09, or equivalent in other pay systems. Examples of specialized experience includes ability to modify standard practices and adapt equipment or techniques to solve a variety of problems; ability to adapt precedents or make significant departures from previous approaches to similar projects in order to provide for the specialized requirements of some projects; and ability to apply the standard practices of related engineering disciplines and architecture as they relate to engineering design. Broad understanding of state and local jurisdictions over the use of land and natural resources, the construction of facilities and utilities, and the distribution of utilities services. Experience in installation/command mission and organization. OR EDUCATION: 3 full years of progressively higher-level graduate education leading to a Ph.D. or equivalent doctoral degree. OR COMBINATION OF EXPERIENCE AND EDUCATION: may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. NOTE: You must submit a copy of your transcripts. SPECIALIZED EXPERIENCE GS-0830-12: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes experience in mechanical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments. Experience in design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Experience drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. KSAs CONTINUED FROM QUALIFICATIONS KNOWLEDGE, SKILLS AND ABILITIES (KSAs) - 0830-07: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Professional knowledge of mechanical engineering concepts and principles and standard engineering practices, methods, and techniques to perform, following specific instructions, routine projects or minor phases of a larger and more complex project; and knowledge of computer aided design and drafting (CADD) programs to perform routine design and drafting assignments. 2. Skill in preparing graphs, curves, or tables. 3. Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information. 4. Ability to use relevant software programs and use computer aided design and drafting programs (CADD). 5. Ability to work cooperatively as a team member in the design of mechanical systems. Ability to make calculations applying standard formulas; and record factual data in tests and observation studies. KNOWLEDGE, SKILLS AND ABILITIES (KSAs) - 0830-09: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Professional knowledge of mechanical engineering concepts, principles, and practices and familiarity with other engineering disciplines and architecture to perform routine projects with complete responsibility, or portions of large and complex projects. 2. Knowledge of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; standard contracting regulations, practices, and procedures; and health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders. 3. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions. 4. Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions. 5. Ability to plan and organize work and coordinate with other engineering disciplines and architects. 6. Ability to communicate effectively, both orally and in writing, and maintain good working relations. IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcripts with the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation. FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying. Additional Information KSA CONTINUED FROM QUALIFICATIONS KNOWLEDGE, SKILLS AND ABILITIES (KSAs) - 0830-11: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Professional knowledge of mechanical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines. 2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements; of environmental principles, laws, and regulations; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds. 3. Knowledge of automated data processing concepts, systems capabilities; and knowledge of program planning and budgeting cycles, financial control and budget systems and management. 4. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings sufficient to convey design concepts and ideas and formulate working drawings. 5. Ability to plan, conduct and record site/facilities surveys and inspection; to document, analyze, interpret, and apply results, and procedures in a variety of situations and recommend timely and economical solutions. 6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships. Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position. Direct Deposit: All federal employees are required to have direct deposit. Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here. If you have questions regarding this announcement and have hearing or speech difficulties click here.
