Back to Jobs search

Diesel Fleet Mechanic Technician II

Sysco • Mounds View, MN • 1h ago

Pay: up to $25.24-$37.84 per hour, based on experience

3rd Shift available: 4X10s

$600 Annual Tool Allowance

Annual Boot Allowance

Outstanding benefits: www.syscobenefits.com

Excellent full-time career with a stable and growing company

Move your career FORWARD with Sysco Foods!

JOB SUMMARY

To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.

RESPONSIBILITIES

Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.

Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).

Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment.

Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.

Address all Driver Vehicle Inspection Report write ups timely, and efficiently.

Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.

Follow procedures including documenting all work performed on work orders.

Learn and develop efficiency in Sysco computer programs

Proficient in electrical meter testing

Knowledge of controls and electric (DC (distribution center) low voltage

Electric motor knowledge (DC)

Complete electrical repairs and welding projects as needed.

QUALIFICATIONS

Education

Medium / Heavy Duty truck technical training

High school diploma or GED required

Experience

2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair

Current and valid driver's license.

Certifications, Licenses, and Registrations

Annual Inspector Certification, Knowledge, Skills, and Abilities

Brake Inspector Certification, Knowledge, Skills and Abilities

ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required)

609 HVAC Certification

Professional Skills

Working knowledge of computer-based diagnostic software for OEM's and component manufacturers

Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics

Expert knowledge and skill of all vehicle systems and components

Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment

Moderate knowledge and skill in Preventive Maintenance Inspections and repair

Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG)

Basic computer skills and knowledge

Moderate knowledge of all DOT (FMCSA) regulations

Basic knowledge of OSHA safety regulations

Basic knowledge of environmental regulations

The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

Ability to operate various pieces of equipment

Ability to stand, sit, walk, bend, reach

Ability to push/pull

Ability to lift /carry

Ability to grasp tools

Ability to perform Repetitive motion: wrenches and hand tools

Physical Demands

While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.

The employee is frequently required to sit and reach with hands and arms.

The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.

The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs.

Work Environment

While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.

The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.

The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).

The associate is occasionally exposed to high, precarious places and confined spaces.

The associate is occasionally exposed to fumes or airborne particles.

The noise level in the work environment is usually moderate.

Frequently works outdoors.

AFFIRMATIVE ACTION STATEMENT:

Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

Sysco

Go to Apply

Share this job

Similar Jobs

Technician III Eng - PCB Designer Technician

TSI Incorporated • Shoreview, MN • 1h ago

IT & Engineering

Who Are We? Do you want to help to make the world a better place? Join our team! At TSI our vision is to create a better world by helping to protect people, products and the environment. We are proud of the wide range of...

1h ago

Go to Apply

Software Developer - Architect - AI Vector

Oracle • Saint Paul, MN • 3h ago

IT & Engineering

Job Description Design, develop, troubleshoot and debug software programs for databases, applications, tools, networks etc. Responsibilities As a member of the software engineering division, you will take an active role...

3h ago

Go to Apply

Systems Integration and Test (I&T) Engineer

General Dynamics Mission Systems • Bloomington, MN • 3h ago

IT & Engineering

Basic Qualifications Education Requirements: Requires a Bachelor's degree in Systems Engineering, or a related Science, Engineering, Technology or Mathematics field. Also requires 5+ years of job-related experience, or a...

3h ago

Go to Apply

SDET (Software Development Engineer in Test)

Genesis10 • Eden Prairie, MN • 3h ago

IT & Engineering

Genesis10 is currently seeking an SDET (Software Development Engineer in Test) for a 6-month contract role with our healthcare clients in Eden Prairie, MN. This role is 100% remote. Compensation: $60.00 - $65.00 per hour...

3h ago

Go to Apply

Process Engineer

Actalent • Eagan, MN • 3h ago

IT & Engineering

Job Title: Process EngineerJob Description Join a dynamic team where you will play an integral role in building, implementing, and training on two new systems: the Alarm Management System and Shift Log/Shift Handover Sys...

3h ago

Go to Apply

CMM Programmer - Union Foundry

Aerotek • Saint Paul, MN • 3h ago

IT & Engineering

CMM Programmer Needed: 1st Shift - Union & Direct Placement Pay $35-40/hr Job Description As a key contributor to our new product launch team, the CMM Programmer is responsible for creating inspection programs and de...

3h ago

Go to Apply

Civil Engineer

Actalent • Minneapolis, MN • 3h ago

IT & Engineering

Job Title: Civil EngineerJob Description We are excited to meet a seasoned design engineer and project manager seeking an extraordinary opportunity as a civil engineer and project lead. The right applicant will serve as...

3h ago

Go to Apply

Power BI Developer

U.S. Bank • Minneapolis, MN • 7h ago

IT & Engineering

At U.S. Bank, we're on a journey to do our best. Helping the customers and businesses we serve to make better and smarter financial decisions and enabling the communities we support to grow and succeed. We believe it tak...

7h ago

Go to Apply

Software Engineer III - Java

HelpSystems LLC • Eden Prairie, MN • 10h ago

IT & Engineering

Whether you're an experienced professional or just getting started, your contributions matter at Fortra. If you're passionate about tackling meaningful challenges alongside talented team members committed to helping each...

10h ago

Go to Apply

Principal Software Engineer

HelpSystems LLC • Eden Prairie, MN • 10h ago

IT & Engineering

10h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.