Electromechanical Engineer, Launch Pad Mechanisms (Starship)

SpaceX • Cape Canaveral, FL • 1h ago

Cape Canaveral, FL

Apply

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

ELECTROMECHANICAL ENGINEER, LAUNCH PAD MECHANISMS (STARSHIP)

SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond. Starship will be the world's most powerful launch vehicle ever developed, with the ability to carry in excess of 100 metric tons to Earth orbit.

We are looking for an electrical engineer to help SpaceX develop and build launch systems for Starship. This role will be focused on electrical control systems for the launch mount and integration tower, including I/O systems, motion systems, and supporting infrastructure.

The successful applicant will be joining, and be supported, by a highly talented team of engineers with an amazing track record in developing any @type of automated solution imaginable.

RESPONSIBILITIES:

Electrical systems:

Architect, design and integrate control systems for the Starship Launch pads

Design industrial electrical control panels which are NFPA79/NEC/UL508A compliant

Design control and data acquisition systems

Design and author electrical schematics

Design electrical conveyance and distribution systems (e.g. raceways, cables, wiring methods)

Work closely with other disciplines. Interface control systems with high power equipment and communication equipment.

Design electrical systems for hazardous environments

Control software:

Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable and reusable for similar applications

Configure, commission and tune VFDs for open and closed loop control system applications

Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting

Mechanical integration:

Add detail for electrical assemblies to CAD models to plan out install for cable tray, conduit, panel mounting, etc.

General responsibilities:

Participate in initial equipment conceptual development and carefully balance product specifications, process requirements, layout complexity, cost, and lead-time limits

Manage electrical cabinet builds, field wiring, and conveyance installs

Set, implement, and maintain schedules and budgets to ensure project completion

BASIC QUALIFICATIONS:

Bachelor's degree in an engineering discipline or physics

1+ years of experience in the design and commissioning of control systems for industrial applications (internship experience qualifies)

PREFERRED SKILLS AND EXPERIENCE:

Experience with Industrial and process automation & control systems.

Experience architecting, designing, and integrating various industrial control systems.

Electrical schematic CAD experience using EPlan

Mechanical design experience with CAD such as Siemens NX or SolidWorks

PLC programming experience

HMI and SCADA programming experience

Field bus networks, serial communication and Ethernet communication

Hands-on experience building and commissioning high quality electrical control panels and electro-mechanical systems

Knowledge of NEC, UL508A codes

Excellent communication skills both written and verbal

Experience in fast-paced iterative design and test environments

Experience solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team

Strong work ethic and drive to succeed as part of a high functioning team

Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment

Ability to thrive in ambiguity, independently drive project progress, and manage multiple priorities

Demonstrated ability to design, implement and troubleshoot control systems

Fundamental understanding of engineering principles behind electronic equipment, instrumentation, and commonly used industrial equipment

Select and size electrical and electromechanical components such as servo motors, controllers, and VFDs.

Experience designing and installing instrumentation and control systems in hazardous areas (NFPA 70 Section 500 installations); Class 1, Division 1 and Division 2 environments or IEC equivalence

Experience tuning PID controllers

Experience with electrical power distribution, working knowledge of NFPA 70 and NFPA 70E

First-hand experience with programming and software development

Experience with industrial bus protocols such as Modbus, Profinet and EtherNet/IP

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere (https://www.pmddtc.state.gov/?id=ddtc\kb\article\page&sys\id=24d528fddbfc930044f9ff621f961987) .

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

SpaceX

Go to Apply

Share this job

Similar Jobs

Mechanical Systems Engineer V- HVAC Controls

Amentum • Kennedy Space Center, FL • 1h ago

IT & Engineering

Company Conformance Statement In the performance of their respective tasks and duties all employees are required to conform to the following: Perform quality work within deadlines with or without direct supervision. Inte...

1h ago

Go to Apply

Mechanical Systems Engineer III- HVAC

Amentum • Kennedy Space Center, FL • 1h ago

IT & Engineering

Purpose and Scope System Engineering position with senior level experience to perform a variety of engineering assignments in project development, design, operations, installation, and maintenance of HVAC and Compressed...

1h ago

Go to Apply

Structural Engineer 3

PDS Defense • Melbourne, FL • 1h ago

IT & Engineering

Engineering Structural Engineer 3 Melbourne, FL Posted: 11/20/2025 Job Description Job ID#: 214409 Job Category: Engineering Position Type: Associate - W2 Duration: 52 Shift: 1 PDS Defense, Inc. is seeking a Structural E...

1h ago

Go to Apply

Software Engineering Specialist

GE Vernova • Melbourne, FL • 2h ago

IT & Engineering

Job Description Summary Join our dynamic team as a Software Engineering Specialist, where you'll play a pivotal role in crafting, deploying, and sustaining versatile UI framework components, applications, and services. S...

2h ago

Go to Apply

Electrical Technician

Cimarron Software Services, Inc. • Titusville, FL • 10h ago

IT & Engineering

::: {#jobdetailsatsrequisitiondescription} Cimarron is seeking an experienced ElectricalTechnicianto support the development of the CST-100 Starliner, a spacecraft supporting NASA's Commercial Crew Program at the Kennedy...

10h ago

Go to Apply

Manufacturing Engineering Intern - Summer 2026

Lockheed Martin • Titusville, FL • 23h ago

IT & Engineering

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds i...

23h ago

Go to Apply

Electrical Engineer, Launch Pad Mechanisms (Starship)

SpaceX • Cape Canaveral, FL • 1d ago

IT & Engineering

Electrical Engineer, Launch Pad Mechanisms (Starship) Cape Canaveral, FL Apply SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we...

1d ago

Go to Apply

Operations Mechanical Engineer

Amentum • Kennedy Space Center, FL • 1d ago

IT & Engineering

We are launching people to the Moon and Mars. If you want to be part of this amazing mission and enjoy working in a great team environment, we would love to have you as part of our team that is making history, today. It...

1d ago

Go to Apply

Electrical Design Technician

Jacobs • Cape Canaveral, FL • 1d ago

IT & Engineering

This job opportunity is available at ANY location in the United States. Ideally, selected candidates will be near a JACOBS U.S. based office, but we intend to hire the "best" candidates. At Jacobs, we don't settle - alwa...

1d ago

Go to Apply

Supply Chain Technical Analyst

L3Harris • Melbourne, FL • 1d ago

IT & Engineering

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growt...

1d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.