Electrical Engineer, Launch Pad Mechanisms (Starship)

SpaceX • Texas, Texas • 1d ago

Starbase, TX

Apply

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

ELECTRICAL ENGINEER, LAUNCH PAD MECHANISMS (STARSHIP)

SpaceX's Starship spacecraft and Super Heavy rocket (collectively referred to as Starship) represent a fully reusable transportation system designed to carry both crew and cargo to Earth orbit, the Moon, Mars and beyond. Starship will be the world's most powerful launch vehicle ever developed, with the ability to carry in excess of 100 metric tons to Earth orbit.

We are looking for an electrical engineer to help SpaceX develop and build launch systems for Starship. This role will be focused on electrical control systems for the launch mount and integration tower, including I/O systems, motion systems, and supporting infrastructure.

The successful applicant will be joining, and be supported, by a highly talented team of engineers with an amazing track record in developing any @type of automated solution imaginable.

RESPONSIBILITIES:

Electrical systems:

Architect, design and integrate control systems for the Starship Launch pads

Design industrial electrical control panels which are NFPA79/NEC/UL508A compliant

Design control and data acquisition systems

Design and author electrical schematics

Design electrical conveyance and distribution systems (e.g. raceways, cables, wiring methods)

Work closely with other disciplines. Interface control systems with high power equipment and communication equipment.

Design electrical systems for hazardous environments

Control software:

Architect, write, and debug PLC code with an emphasis on generating code that is organized, structured, documented, maintainable and reusable for similar applications

Configure, commission and tune VFDs for open and closed loop control system applications

Generate aesthetically simple HMI screens for complex machinery while providing sufficient feedback for troubleshooting

Mechanical integration:

Add detail for electrical assemblies to CAD models to plan out install for cable tray, conduit, panel mounting, etc.

General responsibilities:

Participate in initial equipment conceptual development and carefully balance product specifications, process requirements, layout complexity, cost, and lead-time limits

Manage electrical cabinet builds, field wiring, and conveyance installs

Set, implement, and maintain schedules and budgets to ensure project completion

BASIC QUALIFICATIONS:

Bachelor's degree in an engineering discipline or physics

1+ years of experience in the design and commissioning of control systems for industrial applications (internship experience qualifies)

PREFERRED SKILLS AND EXPERIENCE:

Experience with Industrial and process automation & control systems.

Experience architecting, designing, and integrating various industrial control systems.

Electrical schematic CAD experience using EPlan

Mechanical design experience with CAD such as Siemens NX or SolidWorks

PLC programming experience

HMI and SCADA programming experience

Field bus networks, serial communication and Ethernet communication

Hands-on experience building and commissioning high quality electrical control panels and electro-mechanical systems

Knowledge of NEC, UL508A codes

Excellent communication skills both written and verbal

Experience in fast-paced iterative design and test environments

Experience solving complex problems with little to no supervision on schedule as an individual or as a member of an integrated team

Strong work ethic and drive to succeed as part of a high functioning team

Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment

Ability to thrive in ambiguity, independently drive project progress, and manage multiple priorities

Demonstrated ability to design, implement and troubleshoot control systems

Fundamental understanding of engineering principles behind electronic equipment, instrumentation, and commonly used industrial equipment

Select and size electrical and electromechanical components such as servo motors, controllers, and VFDs.

Experience designing and installing instrumentation and control systems in hazardous areas (NFPA 70 Section 500 installations); Class 1, Division 1 and Division 2 environments or IEC equivalence

Experience tuning PID controllers

Experience with electrical power distribution, working knowledge of NFPA 70 and NFPA 70E

First-hand experience with programming and software development

Experience with industrial bus protocols such as Modbus, Profinet and EtherNet/IP

ITAR REQUIREMENTS:

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere (https://www.pmddtc.state.gov/?id=ddtc\kb\article\page&sys\id=24d528fddbfc930044f9ff621f961987) .

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

SpaceX

Go to Apply

Share this job

Similar Jobs

Assistant Director of Property Operations and Engineering - Hilton Austin

Hilton • Austin, TX • 2h ago

IT & Engineering

TheHilton Austin ( https://www.hilton.com/en/hotels/auscvhh-hilton-austin/?SEO\\id=BING-AMER-HI-AUSCVHH&y\\source=1\_MTIyMDkxMS00ODMtbG9jYXRpb24ud2Vic2l0ZQ==)is looking for an experienced property operations leader t...

2h ago

Go to Apply

Archaeological Field Technician (Part-Time)

Johnson, Mirmiran, and Thompson Inc. • Houston, TX • 5h ago

IT & Engineering

Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,400 professionals that provides a full range of multi-disciplined engineering, architecture, information technology, and r...

5h ago

Go to Apply

Entry Level Engineer

Actalent • Houston, TX • 5h ago

IT & Engineering

We are seeking a Entry Level Engineer to join our team in Houston. Under the supervision of a technical lead, you will support various activities related to the design and construction of electrical overhead and undergro...

5h ago

Go to Apply

Engineer, Information Security and Risk

Cardinal Health • Austin, TX • 5h ago

IT & Engineering

Company Overview: Cardinal Health, Inc. (NYSE: CAH) is a global healthcare services and products company. We provide customized solutions for hospitals, healthcare systems, pharmacies, ambulatory surgery centers, clinica...

5h ago

Go to Apply

Senior Software/System Architect

TISTA Science and Technology • Austin, TX • 5h ago

IT & Engineering

Overview Are you a Senior Software/System Architect who would like to have a positive impact for millions of people? If so, we may have an opportunity for you! TISTA associates enjoy above Industry Healthcare Benefits, R...

5h ago

Go to Apply

Developer Specialist

Health Care Service Corporation • Richardson, TX • 5h ago

IT & Engineering

At HCSC, our employees are the cornerstone of our business and the foundation to our success. We empower employees with curated development plans that foster growth and promote rewarding, fulfilling careers. Join HCSC an...

5h ago

Go to Apply

Coder - RCO Coding

UTMB Health • Galveston, TX • 5h ago

IT & Engineering

Coder - RCO Coding Galveston, Texas, United States New Business, Managerial & Finance UTMB Health Requisition # 2506642 Job Summary Properly codes Professional Inpatient, Physician outpatient and technical charges fo...

5h ago

Go to Apply

Manufacturing Engineer - Intern

Lockheed Martin • Fort Worth, TX • 7h ago

IT & Engineering

Description: By bringing together people that use their passion for purposeful innovation, at Lockheed Martin we keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds i...

7h ago

Go to Apply

Sr. Manufacturing Engineer

Advanced Micro Devices, Inc • Austin, TX • 7h ago

IT & Engineering

WHAT YOU DO AT AMD CHANGES EVERYTHING At AMD, our mission is to build great products that accelerate next-generation computing experiences-from AI and data centers, to PCs, gaming and embedded systems. Grounded in a cult...

7h ago

Go to Apply

Manufacturing Engineer, Hardware Engineering - Manufacturing

Amazon • Austin, TX • 7h ago

IT & Engineering

Description Amazon Web Services' Hardware Engineering team is looking for experienced professionals to help build the world's premier cloud computing platform. We are looking for Manufacturing Engineers who are capable o...

7h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.