Electrical Installer C

Lockheed Martin • Stratford, CT • 2d ago

Description: Assist higher graded electrical installers in a variety of routine wiring and installation duties and/or modifications of electrical and electronic systems on aircraft.

Follow prescribed procedures and detailed instructions, drawings, cable and wiring diagrams, post terminal charts, assembly operation sheets and other oral or written instructions to properly route and terminate wires, cables and harnesses, etc., and install and replace electrical and electronic equipment.

Drill holes and fasten down cables, harnesses and equipment with clamps, straps or other means of support.

Splice wires and perform minor repair work using heat gun, soldering iron, crimpers, etc., and other hand and/or power tools normally associated with electrical installations.

Check all work to insure adherence to quality standards, and sign off and complete all required paperwork.

As directed, assist other installers on wiring, installations, and/or rework, sign out for Government Furnished Equipment (G.F.E.).

At the direction of supervision, perform a variety of other duties, usually of a related or similar nature, such as correcting inspection reported discrepancies.

Refer all problems to Working Leader or Supervisor.

As required segregate waste material and follow good housekeeping practices.

Basic Qualifications:

6-12 months experience

Requires the ability to read and understand drawings, cable and wiring diagrams, and follow operation sheets.

Use arithmetic involving decimals and fractions and use hand and/or power tools associated with electrical installations, such as soldering irons, crimpers, strippers, drills, screwdrivers, etc

Clearance Level: None

Other Important Information You Should Know

Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.

Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.

Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.

Schedule for this Position: Standard Monday to Friday 40 hour work week

Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.

At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.

Experience Level: Hourly/Non-Exempt

Business Unit: RMS

Relocation Available: No

Career Area: Manufacturing

Type: Full-Time

Shift: Second

Similar Jobs

Manufacturing Engineer

AMETEK.Inc • Bridgeport, CT • 2d ago

IT & Engineering

The Manufacturing Engineer, develops, evaluates, and improves manufacturing methods. Utilizes knowledge of product design, materials, tooling, fabrication process, and production equipment capabilities, assembly methods,...

2d ago

Go to Apply

Qualified Craft Worker (Electrical) (37.5 Hour)

State of Connecticut, Department of Administrative Services • Norwalk, CT • 3d ago

IT & Engineering

Qualified Craft Worker (Electrical) (37.5 Hour) Office/On-site Recruitment # 250902-6822TC-001 Location Norwalk, CT Date Opened 9/4/2025 12:00:00 AM Salary $31.86 - $40.96/hour ( New State employees start at the minimum)...

3d ago

Go to Apply

Cyber Security Engineer

Nuvance Health • Danbury, CT • 3d ago

IT & Engineering

Description Summary: The Cyber Security Engineer will have responsibility for incident response along with a desire to relentlessly champion best practices. This role will perform all functions required to support day-to...

3d ago

Go to Apply

Cloud Compute Engineer

Synchrony • Stamford, CT • 3d ago

IT & Engineering

Job Description: Role Summary/Purpose: We are seeking a skilled AWS Automation Engineer to join our compute engineering team. You will be responsible for designing, building, and maintaining automated AWS cloud infrastru...

3d ago

Go to Apply

Manufacturing Engineer II

Medtronic • North Haven, CT • 4d ago

IT & Engineering

We anticipate the application window for this opening will close on - 11 Sep 2025 At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all....

4d ago

Go to Apply

AVP, Principle Software Engineer

Synchrony • Stamford, CT • 4d ago

IT & Engineering

Job Description: Role Summary: The AVP, Principle Software Engineer craves working in a hands-on system design and architecture environment and leads by example to make sure time sensitive projects get done on time and t...

4d ago

Go to Apply

Electrical Engineering Leader

CDM Smith • Stamford, CT • 4d ago

IT & Engineering

42467BR Requisition ID: 42467BR Business Unit: IND Job Description: We are seeking a highly skilled Electrical Engineering Leader to provide expert technical guidance and oversight of the electrical engineering group. Th...

4d ago

Go to Apply

Electrical Engineering Leader

CDM Smith • New Haven, CT • 4d ago

IT & Engineering

4d ago

Go to Apply

Entry Level Engineering Technician

Actalent • Wilton, CT • 4d ago

IT & Engineering

Mechanical Technician - Fairfield County, CT Industry: Advanced Technology & Manufacturing Location: Fairfield County, CT Schedule: Multiple Shifts Available | Cleanroom Environment Reports to: Engineering Team About...

4d ago

Go to Apply

Assistant Electrical Engineer - Transmission & Distribution, Substation (Wallingford)

Burns & McDonnell • Wallingford, CT • 5d ago

IT & Engineering

Description The Assistant Electrical Engineer will assist project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthc...

5d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.