Enclosure Assembly Tech II (Manufacturing)

Southern Company • Greensboro, NC • 17h ago

Description

Job Summary:

The Assembly Tech 2 role is responsible for the assembly of power generation equipment including generators, enclosures, energy storage units, and PECs. This role is responsible for following work instructions created from engineering drawings to build power generation equipment to specified design. The Assembly Tech 2 position is tasked with the electrical wiring and final electrical terminations of the assembly build. They are also responsible for landing and terminating the load cables and other critical components of the power generation equipment manufacturing process. Assembly Tech 2 is someone who has demonstrated proficiency in the servicing/maintenance, assembly, or emplacement of power generation equipment; skills related to the electrical/mechanical servicing of heavy equipment will also be considered.

Minimum Qualifications: (Education, Experience, Knowledge and Skills):

Requires at least 3 years of experience in an electrical or mechanical manufacturing environment.

High School Diploma or equivalency preferred, a combination of education and relevant work experience will be considered.

Must be able to read measuring devices to the 1/16th of an inch.

Knowledge of sheet metal, shear, and break operations strongly preferred.

Electrical experience is highly preferred.

Job Duties and Responsibilities:

Assemble complex electrical and mechanical sub-assemblies according to drawings, bills of material, schematics, and/or standard procedures.

Reference engineering documents and schematics to guide them in the assembling of the mechanical parts and the wiring of the controls and house power.

Read/ understand electrical drawing of both house power and communication wiring, properly landing/ labeling wiring in both TCC/ECC and house power panel.

Mount Genset on its skid using correct hardware and meeting torque requirements.

Mount all stands to skid (ECC, GBC, SCR, disconnect) and setting said components in place.

Connect exhaust parts and install them using correct hardware, gaskets and meeting all torque requirements.

Make load cables using correct gauge cable, lug, and proper crimp.

Fabricate CAN harnesses, fuel line, and block heater hoses.

Install all phases of load cables, bend install conduit and assemble def pumps, solenoids, and complex def systems.

Electrical wire and cable routing skills and the understanding of standard wiring workmanship as it pertains to quality.

Proficiency using a crimping tool, stripping tool; and multimeter as well as hand tools such as wrenches, ratchets, torque wrenches).

Collaborate and coordinate daily tasks with others to align priorities for smooth assembly operations.

Troubleshooting skills are crucial, may be required to drill and tap holes, crimps, screws, bolts, rivets, mount control units, and to provide openings for elements, wiring, and instruments using hand and power tools, machines, and equipment to ensure proper fitment and operation.

Assist with the integration, on-the-job training, and mentoring of new associates.

Additional responsibilities and objectives will be added as needed based on business and area of needs.

Physical Demands and Work Environment:

This position will require standing, stooping, bending, and limited lifting of up to 50lbs. Manual dexterity requires the ability to manipulate tools and small parts of machines.

General manufacturing environment which may include non-climate regulated workspaces

The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.

PowerSecure is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. This position is not open to third party recruiters.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

Similar Jobs

Enclosure Assembly Tech II (Manufacturing)

Southern Company • High Point, NC • 17h ago

IT & Engineering

Description Job Summary: The Assembly Tech 2 role is responsible for the assembly of power generation equipment including generators, enclosures, energy storage units, and PECs. This role is responsible for following wor...

17h ago

Go to Apply

Electrical Engineer

Actalent • High Point, NC • 3d ago

IT & Engineering

Electrical Engineer Job Description As an Electrical Engineer, you will design school bus electrical systems using advanced electrical engineering principles. Your role includes developing 3D models, installation drawing...

3d ago

Go to Apply

Electrical Engineer

Actalent • High Point, NC • 3d ago

IT & Engineering

3d ago

Go to Apply

Quality Assurance Data Review Scientist

Cambrex High Point • High Point, NC • 5d ago

IT & Engineering

Company Information Cambrex is a leading global contract development and manufacturing organization (CDMO) that provides drug substance, drug product, and analytical services across the entire drug lifecycle. With over 4...

5d ago

Go to Apply

Electrical Engineer

Actalent • Greensboro, NC • 1w ago

IT & Engineering

Job Description We are seeking a detail-oriented PLC Programmer with excellent communication skills to join our team. The ideal candidate will be responsible for designing control and power systems for industrial machine...

1w ago

Go to Apply

Sr. Director of Product Development & Engineering

Flexsteel Industries • High Point, NC • 1w ago

IT & Engineering

Description We are seeking an experienced, innovative, and results-oriented Senior Director of Product Development and Engineering to lead our furniture manufacturing company's product development and engineering efforts...

1w ago

Go to Apply

APU Assembly Technician

TAT Technologies Ltd • Greensboro, NC • 2w ago

IT & Engineering

TAT Piedmont is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft so...

2w ago

Go to Apply

Systems Design Engineer

Actalent • Greensboro, NC • 2w ago

IT & Engineering

Job Title: Systems Engineer - Vehicle Electronics Driveline Integration and Bodybuilder Engineering Job Description The EE Architecture Systems Engineering team develops system design and architecture concepts focusing o...

2w ago

Go to Apply

Systems Engineer

CACI International • High Point, NC • 2w ago

IT & Engineering

Systems Engineer Job Category: Engineering Time Type: Full time Minimum Clearance Required to Start: Secret Employee Type: Regular Percentage of Travel Required: Up to 75% Type of Travel: Outside Continental US The Oppor...

2w ago

Go to Apply

MANUFACTURING TECHNICIAN IV

Brantner and Associates, Inc • Greensboro, NC • 2w ago

IT & Engineering

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Automation/Manufacturing Technici...

2w ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.