Summary
You will serve as a MARINE MACHINERY MECHANIC (NUCLEAR) in the PEARL HARBOR NSY AND IMF.
Learn more about this agency
Duties
Help
You will disassemble/repair/reassemble valves including primary system valves requiring radiological contamination controls.
You will replace pumps and pump mechanical seals.
You will perform primary and secondary system valve adjustments.
You will repack nuclear secondary and primary system valves.
You will interpret and apply the requirements contained in technical work documents, technical manuals, shop directives, multi-view blueprints.
You will make the necessary templates, jigs, and other fixtures required for repair or installation utilizing knowledge of materials and their versatility.
Requirements
Help
Conditions of employment
Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
This is an overseas position. You will be subject to and must be able to satisfy the overseas requirements of the 26Jul12 DODI 1400.25 V1230: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/140025v1230.pdf
This position may require travel to places within and outside the contiguous United States which could include remote or isolated sites. You may be required to travel on military and commercial aircraft for extended periods of time.
If eligible for permanent change of station, the appointee will be required to sign a transportation agreement to establish a Government time in service requirement of 12 months.
Must be able to obtain and maintain a U.S. Passport.
May be required to obtain a VISA dependent on the overseas country's laws/regulations.
You will be required to sign the Statement of Understanding for Overseas Employment acknowledging receipt and understanding of the statement of living and working conditions for this location.
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
Males born after 12-31-59 must be registered for Selective Service.
You will be required to successfully complete a pre-appointment physical examination.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Must successfully complete all necessary radiological, nuclear and non-nuclear training and requirements.
Incumbent may be expected to travel and must be able to obtain a government issued passport.
Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
Qualifications
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. Decipher and put to use technical specification, quality control and assurance procedures, test requirement, inspection and radiological priorities and policies. Direct and oversee the planning, scheduling and execution of nuclear production work applicable to ship availability..
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification System for Trades and Labor Occupations (X-118C). Additional qualification information can be found at: http://www.opm.gov/qualifications/x-118c/tabindx.asp. and https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Marine Machinery Mechanics usually perform work inside and outside exposing them to the prevailing weather conditions, noise, and intermittent slippery or uneven surfaces. Frequently, work is performed in cramped areas, close confined spaces of ships and submarines with minimum light and ventilation, and in areas with high temperatures such as often exist in ships' boiler and laundry rooms. Some work is performed on or near nuclear reactor systems. They are constantly exposed to moving objects, elevations, and sharp edges with the possibility of cuts and bruises, and to noise and vibration from machines. They are also exposed to the possibility of an electric shock when working on wet surfaces and of serious injury from slipping and falling while working on masts, in the dry dock, and from ladders and staging. Dirt, grease, dampness, and chemical fumes are frequently encountered. Various protective devices such as safety shoes and glasses, gloves, and hard hats are used.
Marine Machinery Mechanics frequently handle objects weighing up to 20 kilograms (45 pounds) and occasionally carry objects weighing 20 kilograms (45 pounds) and over for considerable distances. They are required to push, pull, reach, walk, stand, crawl, kneel, bond, and work in cramped positions over and under machinery of all @types for sustained periods of time. Some work involves ascending and descending narrow vertical ladders or staging, often while carrying tools and equipment.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application:?1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Education
This position does not require any education.
Additional information
Eligible FWS employees recruited from outside of the insular area may be eligible for a Pay Differential of 20% of their basic pay. Percentages of differentials are subject to change without notice.
This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs.
Additional vacancies may be filled by this announcement.
Pay retention may be granted if certain conditions are met.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
Tour of duty will be 24 months.
To learn more about the living and working conditions at this military installation and additional Non-Foreign Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the @type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
