Description
Who We Are
Vigor, a Titan Company, is a values-driven, diversified industrial business operating in six locations with approximately 1,800 people in Oregon, Washington and Alaska. Built around a collection of powerful, unique assets and differentiated capabilities, Vigor excels at specialized shipbuilding, ship repair and handling important, complex projects in support of energy generation, our nation's infrastructure and national defense.
With deep respect for people and the planet, Vigor strives to be a positive, regenerative force for good - environmentally, in the lives of our employees and in the community. We have built a positive culture that honors the work we do, the workers who do it, and the world we live in.
POSITION SUMMARY:
This position handles the mechanical maintenance and repair of all PDX facility cranes, dry-docks, buildings, equipment, and piping systems.
HOURLY RATE: $41.44
ESSENTIAL FUNCTIONS AND MAJOR RESPONSIBILITIES:
(This list is not intended to detail all aspects of the assigned work but is representative of the job's overall responsibilities.)
Replace defective parts of machine or adjust clearances and alignment of moving parts.
Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
Repair and lubricate machines and equipment.
Assemble and install equipment, using hand tools and power tools.
Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.
Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
Move machinery and equipment, using hoists, dollies, rollers, and trucks.
Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
Lay out mounting holes, using measuring instruments, and drill holes with power drill.
Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
Level bedplate and establish centerline, using straightedge, levels, and transit.
Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
Install robot and modify its program, using teach pendant.
Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
Have the ability to work at heights.
Have the ability to work in confined spaces.
EDUCATION AND/OR EXPERIENCE:
High school diploma or GED preferred. 4 years relevant work experience preferred. Proven skills, work history and/or applicable education will be considered in lieu of work experience.
KNOWLEDGE SKILLS AND ABILITIES:
Communicates effectively, works independently or in a group.
Ability to do basic math, i.e. add, subtract, divide and multiply.
Ability to read, write, speak, and comprehend English
Desired Knowledge, Skills, and Abilities (mechanical aptitude required, continuing on the job training will be provided for a candidate with the desire to learn this trade):
Reads and understands blueprints and assembly drawings.
Use hand tools (i.e., files and @types of files, hacksaws, wrenches, porta-powers, taps and dies).
Understand and demonstrate the use of all standard shop measuring tools:
Micrometers inside, outside, and depth.
Vernier scales and/or dial calipers.
Rulers and tape measures.
Protractors, Vernier, linear.
Firm joint and spring joint calipers inside and outside.
Height gauges.
Pi tapes.
Show Proficiency in working with some of the following items:
Power boilers
Flame monitoring equipment
Feed water systems
Meters
Water softeners
Regulators
Heat exchangers
Pumps
Deaerators
Valves
Strainers
Natural Gas, and light to heavy fuel systems
Steam and condensate systems
Air compressors
Cooling Systems
Chillers - Dryers
Cooling Towers
Control Air Systems
PHYSICAL DEMANDS:
Sitting: Occasionally may sit 2 to 8 hours per day on bench, stool, or other surface.
Standing: Continually stands up to thirty minutes uninterrupted, up to 5 1/2 hours per day while disassembling, repairing and reassembling machinery or machine parts. Generally stands on level concrete or other surface.
Walking: Frequently walks less than 100 feet interrupted, up to fifty times per day while moving around shop area. Rarely may walk 1/2 mile to work site. Walks on asphalt, concrete or steel surface. May walk on ramps or other graded surfaces.
Crouching: Occasionally- crouches less than 5 minutes uninterrupted, up to 20 times per day.
Kneeling/Crawling: Rarely kneels less than 5 minutes at a time, less than 30 minutes total per day. May kneel on one or both knees depending upon the setting. Rarely- Kneels on level concrete surface. Crawling: Not Required.
Stooping: Rarely- stoops over machinery to observe machine or machine parts or to work on same. May stoop up to 15 minutes at a time, up to 2 1/2 hours per day total.
Twisting: Knees: Rarely while accessing or viewing machine or machine parts. May alternate with kneeling.
Waist: Occasionally twists at waist while retrieving tools or parts from storage areas or to reach for controls. May twist hundreds of times throughout the day.
Neck: Occasionally twists in all direction while observing work in process. May hold position up to 30 minutes at a time.
Climbing: Occasionally climbs up steps on cranes, dry-docks, buildings, or on tables to access machines to set up or make adjustments. Climbs up to 20 times per day on some days.
Balancing: Occasionally while climbing to and from work sites, or climbing on machines.
Leg/Foot Use (To repetitively operate machine controls): Occasionally operates pipe and bolt threader which requires a foot pedal control.
Reaching Overhead: Occasionally reaches for overhead machine controls or hoists. Reaches overhead less than 3 minutes at a time.
Extension: Frequently extends arms while disassembling, repairing, and reassembling machines or machine parts.
Handling/Grasping: Frequently uses tools, machine parts, machine controls while in the process of repairing, disassembling, and reassembling machine or machine part. May need to use one or both hands.
Fingering/Feeling: Frequently uses nuts, bolts, fine measuring equipment, other small pieces of equipment in the process of performing assembly/reassembly and repairs. Works to .001" precision.
Pushing/Pulling: (Average) applies 25 pounds of force frequently with upper body while using wrenches, pry bars, etc. (Maximum) Occasionally applies up to 50 pounds of upper body force while pushing wrenches, pry bars, etc.
Lifting/Carrying: (Average) Carries weights of up to 20 pounds (including small tool box, individual tools, machine parts). (Maximum) Occasionally carries toolbox weighing approximately 45 pounds between shop and work site, a distance of approximately 2,000 feet. May lift items weighing up to 45 pounds ground to shoulder level a maximum of 6 times per day.
Other physical demands: Rarely works while lying on back. May need to contort entire body to reach all areas.
WORK ENVIRONMENT:
Works indoors: Occasionally works in a warehouse machine shop setting that is heated but not air conditioned.
Works outdoors: Frequently walks to and from project sites.
Safety equipment required: Hard hat, eye and ear protection, respirator, no loose clothing, must wear leather shoes/work boots.
Other Exposures: May be exposed to acids, de-greasing cleaners, paints, solvents, oil, grease, liquid steel/putty, oil vapors, petroleum, caustics, fumes, noise, raw sewage, and asbestos.
Operation of equipment/tools/vehicles: Uses hand and power tools, wrenches, hoists, machine tooling equipment such as boring, grinding, tapping, lathe, and drilling equipment. Uses micrometers/dial indicators and other measuring instruments. Chainfalls, knee mills, radial arm drill press, upright drill press, overhead cranes (pendant controlled), portable machining equipment, come-a-longs, port-a-power, cut off saws.
Required hygiene standards: Per company standards.
This role is with a federally contracted employer and is subject to regulations that restrict employment to US Persons only (i.e. US Citizens, lawful permanent residents, legally recognized asylees and refugees, and persons protected under INA). Successful job candidates will be asked to provide documentation of their US Persons status.
Vigor Industrial LLC and its wholly owned subsidiaries are drug, smoke and vape-free workplaces. Prospective employees must pass a drug and alcohol test and background check as pre-employment
screening.
Vigor Values
Vigor expects all employees to enhance the atmosphere in which they work by living the Vigor Values every day.
Truth: We seek the truth, and we speak the truthResponsibility: We act on what we know is rightEvolution: We seek mastery, and adapt to a changing worldLove: We care about the people we work with, and the world we live in
Vigor and its wholly owned subsidiaries are committed to inclusion and diversity by providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, protected veterans, age, genetics, the presence of a physical or mental condition or disability that can be reasonably accommodated, or any other protected class under relevant laws in the locations we operate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and can be requested with Vigor's Human Resources Department.
In addition to federal law requirements, Vigor complies with applicable state and local laws governing nondiscrimination and non-retaliation in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, benefits, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
