CNC Machinist & Programmer

EPSILON SYSTEMS • San Diego, CA • 3h ago

Epsilon Systems Solutions, Inc. is seeking a full-time CNC Machinist & Programmer I in San Diego, CA.

Summary:

The position will provide maintenance, repair and technical support to the customer. Operate and maintain a variety of inside CNC machines. Use technical documents (JFMM, Instructions, NSTM's, Military standards, Test memos, Test Standards, Drawings and Technical Manuals) that contain information required to accomplish work.

Duties and Responsibilities:

Machines, fabricates, and refurbishes newly designed and replacement shipboard components utilizing templates and technical documentation to include ships' drawings.

Completes machine repairing, manufacturing new, removal, repairs, modifying, and testing of various shipboard components.

Determines speeds and feeds, coolants, and lubricants or abrasives to be used to cut, turn, drill, mill, bore, tap, thread, ream, lap, hone, shape, and grind or finish item.

Supports personnel that are able to machine materials to include: stainless steel, 300/400 series; monel; K-monel; copper; brass; aluminum, 4140, 4130, 6061-T6; nylon; Teflon; and various plastics.

Follows the requirements and procedures set forth in FWPs and CWPs.

Reads, understands, and works to the requirements of applicable ship drawings, blueprints, equipment technical manuals, and other applicable approved technical references.

Uses shop mathematics including trigonometry and geometry and hold tolerances to one ten-thousandths (.0001) of an inch.

Maintains dimensional accuracy by inspection of parts using various precision measuring instruments including: sine plates, comparators, micrometers, calipers, v-blocks, angle plates, indicators, dial height gauges, go/no-go gauges, thread gauges, surface gages and other measuring tools.

Determines which machine tool would be used most effectively, and the proper sequence of operations on each machine.

Makes new job setups on a variety of different @types of equipment involving accurate alignment in order to maintain specified overall tolerances.

Sets up and operate conventional machine tools, including: horizontal lathes, vertical turret lathes, horizontal boring machines, radial arm drills, vertical and horizontal milling machines, bench grinders, ID and OD grinders, surface grinders, jig boring machines, hones, and other manual machine tools.

Sets hard jaws and cut soft jaws to hold outside and inside diameters.

Touches off tools using tool eye, and manual touch off using tool, wear, and work offsets.

Uses turning tools, boring bars, insert drills, reamers, inside groovers, outside groovers, part off tools, and threading tools.

Uses tool offsets and work offsets on CNC machining centers and CNC lathes.

Uses Master Cam X10 to program computer numeric control (CNC) machining centers and lathes.

Programs CNC lathes using Fanuc control. Set up and operate 3, 4, and 5-axis CNC milling centers.

Programs and edits programs for CNC machining centers.

Inputs (MDI) machine operations.

Sets up and operates single and multiple spindle CNC lathes.

Required Qualifications:

High school diploma or equivalent

Minimum of 2 years of work experience performing CNC machine programming and operations

Sound interpersonal skills needed to interface, coordinate with company personnel, customers, and outside contacts

Knowledge and difference of grades of inserts and radius of inserts.

Ability to pass PQS 301 Craftsmen qualifications

Ability to read schematics and blue prints

Ability to read technical manuals and repair standards

Ability to read, interpret, and follow detailed written instructions, MRC cards or drawings

Ability to obtain and maintain a secret security clearance

Preferred Qualifications:

Ability to setup and operate 5 axis spindle CNC lathes

Knowledge of the difference between grades of inserts and radius of inserts

Experience operating water jet cutting machines

Knowledge of OMAX waterjet and Intelli-MAX® software

Pay Range:

The pay range for this role is $26.26 -$27.00 Hourly. This is a reasonable estimate for this role. Individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.

ADA Notations:

Requires walking, reaching, sitting and concentration in the presence of occasional noise

Ability to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships)

Ability to lift, carry and move objects up to 50 lbs. in weight

Office, warehouse, laboratory, pier side, shipboard

Noise conditions range from very quiet to loud

Ability to wear a face mask while working

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Similar Jobs

Staff Quality Engineer (Post Market)

BD (Becton, Dickinson and Company) • San Diego, CA • 6h ago

IT & Engineering

We are the people who give possibilities purpose BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination a...

6h ago

Go to Apply

Marine Mechanic Technician I

EPSILON SYSTEMS • Imperial Beach, CA • 6h ago

IT & Engineering

Epsilon Systems Solutions, Inc. has opportunities available for full time Marine Mechanic Technician I in San Diego, CA. Summary: The Marine Mechanic Technician I will provide troubleshooting, maintenance, repair and mat...

6h ago

Go to Apply

Structures Stress Engineer 1 (Onsite)

RTX Corporation • Chula Vista, CA • 1d ago

IT & Engineering

Date Posted: 2026-05-22 Country: United States of America Location: US-CA-CHULA VISTA-B107 ~ 850 Lagoon Dr ~ BLDG 107, Mail Zone 1-C Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirement...

1d ago

Go to Apply

Senior Software Engineer

Leidos • San Diego, CA • 1d ago

IT & Engineering

Description The Leidos Defense Sector currently has an opening for a Lead Software Engineer to support advanced image analysis and mission software development efforts within our Space Vehicle Agile Release Train environ...

1d ago

Go to Apply

Overnight Engineer III

Marriott • Chula Vista, CA • 1d ago

IT & Engineering

Additional Information Job Number 26062566 Job Category Engineering & Facilities Location Gaylord Pacific Resort & Convention Center, 1000 H St, Chula Vista, California, United States, 91910 VIEW ON MAP ( https:/...

1d ago

Go to Apply

(USA) Technician, Refrigeration/HVAC

Walmart • San Diego, CA • 1d ago

IT & Engineering

Position Summary... What you'll do... Supermarket Rack Refrigeration HVAC Technician Are you on the lookout for an exciting career opportunity within a dynamic team? Walmart is expanding our workforce across local retail...

1d ago

Go to Apply

Overnight Engineer I

Marriott • Chula Vista, CA • 2d ago

IT & Engineering

Additional Information Job Number 26062561 Job Category Engineering & Facilities Location Gaylord Pacific Resort & Convention Center, 1000 H St, Chula Vista, California, United States, 91910 VIEW ON MAP ( https:/...

2d ago

Go to Apply

Software Engineering Lead

Leidos • San Diego, CA • 2d ago

IT & Engineering

Description The Leidos Defense Sector currently has an opening for a Software Engineering Lead to support advanced image analysis and mission software development efforts within our Space Vehicle Agile Release Train envi...

2d ago

Go to Apply

Software Engineer, Platforms and Devices

Google • San Diego, CA • 2d ago

IT & Engineering

Software Engineer, Platforms and Devices corporatefare_ Google place San Diego, CA, USA Mid Experience driving progress, solving problems, and mentoring more junior team members; deeper expertise and applied knowledge wi...

2d ago

Go to Apply

Senior Data Scientist - SFL Scientific

Deloitte • San Diego, CA • 3d ago

IT & Engineering

Our Deloitte Strategy & Transactions team helps guide clients through their most critical moments and transformational initiatives. From strategy to execution, this team delivers integrated, end-to-end support and ad...

3d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)