We specialize in Rotary and Mission Systems (RMS) that provide advanced capabilities to serve the defense industry. Our RMS Training and Logistic Solutions (TLS) are designed to meet the unique needs of our customers, offering unparalleled performance, reliability, and versatility. We provide comprehensive support throughout the entire system lifecycle, from design and development to deployment and maintenance. With a focus on innovation, quality, and customer satisfaction, we are committed to delivering RMS solutions that exceed expectations and set new standards for performance and reliability.
-
Perform preventive-maintenance inspections, functional tests, and calibrations; diagnose faults using schematics, service manuals, and ECOs (Engineering Change Order); replace/repair boards, modules, connectors, and firmware.
-
Disassemble, inspect, and repair COLT test kits (signal generators, load banks, adapters); re-term or replace internal components; verify performance against test specifications.
-
Conduct continuity, insulation-resistance, and dielectric-strength testing on TPS cables; splice, re-terminate, or replace cable sections per MIL-STD-810/461 requirements; update cable-status records.
Resolve complex malfunctions (intermittent signal loss, timing anomalies, undocumented failure modes); lead (RCA) and document findings in Maintenance Action Reports (MAR).
-
Review and apply engineering change notices (ECNs) and hardware/firmware updates to COLT, kits, and cables; verify functional and safety compliance before release.
-
Execute depot-sustainment work orders for kits and TPS cables; perform functional acceptance testing after repair; ensure proper labeling, packaging, and storage of repaired assets.
-
Team with Engineers, and depot operators on schematic interpretation, ESD best practices, and repair techniques; review rework for SOP compliance.
-
Update equipment logs, calibration certificates, and maintenance records in SAP & ADIS; ensure adherence to DFARS (Defense Federal Acquisition Regulation Supplement) , MIL-STD, and ISO-9001 requirements.
-
Enforce grounding straps, ionizers, and controlled humidity; conduct safety briefings and participate in periodic safety audits.
-
Identify reliability trends, propose corrective actions, support Performance Management Team (PMT) events, and contribute to SOP revisions and training material.
-
Liaise with Test Engineers to schedule maintenance windows that minimize impact on test campaigns; provide rapid response for emergency repairs.
WHO YOU ARE
The COLT Test Technician / Depot Sustainment Operator - Maintenance?II is the primary custodian of the Common Organizational Level Tester (COLT) and is responsible for the repair, calibration, and sustainment of COLT hardware, associated test kits, and TPS (Test Power Supply) cables used in depot-level support. This is an SCA (Service Contract Act) position governed by the Department of Labor. Blends advanced electronic-maintenance expertise with hands-on operator responsibilities. The incumbent troubleshoots, repairs, and certifies equipment, enforces ESD controls, updates records in SAP-PM, ensures compliance with DFARS, MIL-STD-810/461, and ISO-9001, and provides technical guidance to junior technicians and depot operators. Coordination with Test Engineers is required to schedule maintenance windows that minimize impact on test campaigns, and the role supports continuous-improvement initiatives and safety audits.
WHY JOIN US
When you join our team, you'll be part of a dynamic and supportive work environment that values collaboration, growth, and innovation. We offer opportunities for training and development to help you build your career. Our mission-driven organization is dedicated to making a positive impact in the world, and we're looking for talented and passionate individuals to help us achieve our goals.
Basic Qualifications:
-
Familiarity with calibrated test equipment (high-precision digital multimeters, oscilloscopes, frequency counters).
-
Knowledge of CCA (Circuit Card Assembly) architecture and troubleshooting.
-
Experience using SAP Plant-Maintenance (PM) for work-order creation, tracking, and parts requisition.
-
Competence with standard test-equipment software (e.g., LabVIEW, Tektronix VDI).
-
Understanding of ESD control procedures and ability to enforce them.
-
Ability to pass a background investigation and obtain a DoD Secret clearance if required.
Desired Skills:
-
Ability to read, interpret, and modify schematic diagrams, wiring diagrams, and technical manuals.
-
Willingness to work primarily indoors in climate-controlled labs and test bays, tolerating moderate noise and occasional bright light.
-
Ability to lift?=?25?lb (occasional lifts up to 50?lb with assistance) and use required PPE (safety glasses, ESD wrist strap, hearing protection).
-
Prior experience on COLT or comparable high-end test equipment.
-
Demonstrated experience with ESD-safe workstations and ionization equipment.
-
Experience implementing engineering change notices (ECNs) for avionics test systems.
-
Familiarity with Lean Six-Sigma, Kaizen, or other continuous-improvement methodologies.
-
Certifications such as Certified Electronics Technician (CET) or IPC?7711/7721 (rework & repair).
-
Proficiency with ADIS (Automated Diagnostic Information System) for fault retrieval and reporting.
-
Hands-on experience repairing and testing TPS cables and maintaining test kits for depot sustainment.
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: RMS
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
