Assembler - Hose Department

Ritchie Engineering • Minneapolis, MN • 23h ago

This is Where Tradition Becomes Legend

Ritchie Engineering Co., Inc. is a family-owned company that has been innovating HVAC & Refrigeration tools and test equipment for more than 75 years. From idea conception through development, production, and shipment; every team member plays a crucial role ensuring the quality, reliability, and efficiency of these American-made products.

Schedule:

Enjoy a 4-day work week, 10-hours a day (Monday-Thursday 6:00am and 4:30pm).

Additional hours may be required during busier times

What You Will be Doing:

Perform all tasks involved in the production of assembling parts, inspection, and operating hand and power tools. Follow standard work instructions and practice safe work habits to ensure production is as efficient and safe as possible. Employees may work in other departments in production as needs require.

RESPONSIBILITIES AND DUTIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Performs assembly-@type functions, using hand or power tools

Must have basic computer skills

Clock in and out of work orders

Ability to read work orders and work instructions

Complete proper paperwork daily

Place finished goods in the designated locations

Notify supervisor of any mechanical or material issues

Maintain a clean and safe work area

Performs other related duties and assignments as required

All production workers are expected to be available to work in all areas of production

HOSE RESPONSIBILITIES:

Measure and cut hose for stock by hand

Operate cutting machine

Cut set of test hoses for quality (see work instructions) every morning.

Pull and burst samples, re-work samples if not up to standards.

Inspect fittings, hoses and other parts

Apply epoxy to brass fittings

Salvage brass fittings

Assemble gaskets and valves into barbs

Weigh and measure completed barbs

Operate tying machine

Push ferrules onto hose

Require using some of machinery: Labeling machine, crimping, cutting, bending, tying machines, gasket and valve feeder, pallet jacks, and scales

What You Will Bring:

Required:

Perform different functions using both hand and power tools

Ability to understand quality standards, methods and reporting as needed

Computer skills to perform clocking in and out as well as clocking in work orders

Ability to effectively communicate orally or in written form with co-workers cross-functionally

Proficiency in reading and writing in English

Highly organized, self-motivated and can work independently

Must be highly self-motivated, work with minimal supervision and be able to perform multiple tasks in a fast-paced environment

Will have a thorough knowledge of all manufacturing methods, techniques, and related equipment.

Planning: ability to think ahead and plan over a 30-day time span, and ability to manage multiple priorities.

Strong interpersonal and leadership skills as well as excellent communication skills (both written and oral) with ability to manage multiple priorities.

Preferred:

Proper use of Personal Protective Equipment

Syteline ERP system knowledge

Proficiency in reading and writing in English

Where and How You Will Work

On-site Engagement and Collaboration:

This role works on-site in Bloomington, MN, where your direct contributions will make a real impact. Being in person will allow you to collaborate closely with others, build meaningful relationships, and play a key role in our company success.

Physical Requirements:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required to sit, stand, walk, handle or feel objects, tools and controls

Vision required to inspect products and documents in detail

Occasionally required to reach with hands and arms, and to stoop, kneel, or crouch

Must regularly lift and/or move up to 10 pounds; some workstations require lifting and/or moving up to 60 pounds

Work Environment:

The performance of this position may occasionally require exposure to the manufacturing areas where certain areas require the use of personal protective equipment, may work near moving equipment, and exposed to dust, odors, oil, fumes, and noise.

This document is an outline of the primary tasks assigned and may be changed at the discretion of management, formally or informally, either verbally or in writing. All team members are expected to assist Ritchie Engineering in achieving its goals even if such tasks are beyond the scope of this outline. The job description does not constitute an employment contract, implied or otherwise, other than an "at will" relationship and is subject to change by the employer as the needs of the company and requirements of the job change.

Similar Jobs

Mechanical Assembler

Aerotek • Dayton, MN • 1h ago

Manufacturing & Warehouse

Mechanical Assembler - Build Your Career in a State-of-the-Art Facility Step into a role where your hands-on skills truly matter. As a Mechanical Assembler , you'll help build high-quality industrial paint sprayers used...

1h ago

Go to Apply

1st Shift Forklift Operator

Performance Food Group • Rogers, MN • 3h ago

Manufacturing & Warehouse

135848BR Job Title: 1st Shift Forklift Operator Location: Performance Foodservice Twin Cities (0557) Job Description: We Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Em...

3h ago

Go to Apply

Mechanical Assembler I - 1st Shift

Collins Aerospace • Burnsville, MN • 9h ago

Manufacturing & Warehouse

Date Posted: 2026-01-08 Country: United States of America Location: HMN01: S&IS (Sensors) - Burnsville 14300 Judicial Rd, Burnsville, MN, 55306 USA Position Role Type: Unspecified U.S. Citizen, U.S. Person, or Immigr...

9h ago

Go to Apply

Mechanical Assembler I - Weekend/Part Time

Collins Aerospace • Burnsville, MN • 9h ago

Manufacturing & Warehouse

Date Posted: 2026-01-08 Country: United States of America Location: HMN01: S&IS (Sensors) - Burnsville 14300 Judicial Rd, Burnsville, MN, 55306 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration...

9h ago

Go to Apply

HIRING ASSEMBLERS $21/HR START NEXT WEEK!

Aerotek • Anoka, MN • 21h ago

Manufacturing & Warehouse

Hiring for Entry Level Mechanical Assembler in Anoka, MN, US Pay $20-22/hr Job Description We are seeking an entry-level assembler to join our team in Anoka, MN. This role offers a fantastic opportunity to build and asse...

21h ago

Go to Apply

Mill/Turn Machinist (ENTRY LEVEL)

Aerotek • Saint Paul, MN • 21h ago

Manufacturing & Warehouse

Job Title: CNC Mill/Turn Machine Operator Job Description We are seeking a skilled CNC Mill/Turn Machine Operator with expertise in Fanuc Controls to join our team. The ideal candidate will be responsible for setting up...

21h ago

Go to Apply

Manual Machinist (ENTRY LEVEL)

Aerotek • Minneapolis, MN • 22h ago

Manufacturing & Warehouse

Job Title: Manual Machinist Job Description We are seeking a skilled Manual Machinist to set up and operate Bridgeport Manual Mill and Lathe machines. You will work on 1-4 jobs at a time, creating adhesive products, equi...

22h ago

Go to Apply

Assembler (ENTRY LEVEL)

Aerotek • Minneapolis, MN • 22h ago

Manufacturing & Warehouse

Job Title: Assembler Job Description As an assembler, you will be responsible for building sub-assemblies for larger products. This role involves adding fittings to tubes and attaching tubes to blocks by following pictur...

22h ago

Go to Apply

Manufacturing supervisor

Baxter Healthcare • Saint Paul, MN • 22h ago

Manufacturing & Warehouse

This is whereyour work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues t...

22h ago

Go to Apply

Mill/Turn Machinist (ENTRY LEVEL)

Aerotek • Saint Paul, MN • 22h ago

Manufacturing & Warehouse

22h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.