Back to Jobs search

CNC Machinist ( Okuma and Tsugami Mill-Turn )

ARUNDEL MACHINE • Newtown, CT • 6d ago

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Interprets blueprints, sketches, drawings, manuals, specifications, routing, inspection and setup requirements.

Selects, aligns, and secures holding fixtures and accessories on machines.

Selects, aligns, and secures cutting tools into tool holders and then installs tool assemblies on machines.

Loads and secures raw material on machine.

For manual operations, calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut.

For CNC operations, retrieves current revision machine control program and downloads to machine.

Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required.

Unloads finished machined part from machine and deburrs as necessary to perform quality checks.

Verifies conformance of finished workpiece to specifications manually or through the use of a CMM / DCC-CMM. Enters required data into quality documentation and signs as required.

Performs daily housekeeping and maintenance on assigned machine, auxiliary equipment, tooling and work area.

Confers with engineers, programmers, inspectors, or maintenance personnel to resolve machining or assembly problems.

Competency:

To perform the job successfully, an individual should demonstrate the following competencies:

Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.

Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly.

Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education/Experience:

High school diploma or general education degree (GED); VoTech Trade school graduate preferred.

Completed a machining related apprenticeship program or 3-5 years equivalent combination of education and experience.

Language Ability:

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Math Ability:

Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to compute rate, ratio, and percent and to interpret bar graphs

Reasoning Ability:

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations.

Computer Skills:

Possess Basic Computer skills.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception.

ADDITIONAL NOTES

ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis.

This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Similar Jobs

Shop Helper/Mechanic Apprentice

Firematic Supply Company • Patterson, NY • 1d ago

Manufacturing & Warehouse

Join the Firematic Family! Who We Are: At Firematic , we are a proud family-owned business with over 50 years of dedicated service to those who protect us all. Our commitment to excellence and passion for serving our com...

1d ago

Go to Apply

Warehouse Shipper

Aerotek • Middlebury, CT • 1d ago

Manufacturing & Warehouse

Job Title: Inventory Specialist Job Description We are seeking an experienced Inventory Specialist with a background in manufacturing environments. The ideal candidate will thrive in a fast-paced setting and possess stro...

1d ago

Go to Apply

Warehouse Receiver

Stew Leonard's • Danbury, CT • 1d ago

Manufacturing & Warehouse

Stew Leonard's, a family-owned and operated fresh food store founded in 1969, has locations in Connecticut, New York, and New Jersey. Stew's earned its nickname, the "Disneyland of Dairy Stores" because of its country-fa...

1d ago

Go to Apply

Warehouse Part Time Days

Lowe's • Norwalk, CT • 5d ago

Manufacturing & Warehouse

Your Impact at Lowe's Receiver/Stocker associates help keep our stores running and provide access to the products our customers need. If you are an active, organized, and safety-minded person with a keen eye for detail,...

5d ago

Go to Apply

Assembler

ARUNDEL MACHINE • Newtown, CT • 5d ago

Manufacturing & Warehouse

Essential Duties and Responsibilities include the following. Other duties may be assigned. Attention to detail required when reading op sheets, follow production drawings and sample assemblies, or receives verbal instruc...

5d ago

Go to Apply

Janitor Cleaner

ABM Industries • Wilton, CT • 1w ago

Manufacturing & Warehouse

Overview Position Summary Details The Cleaner position provides the cleaning and upkeep of an assigned area. Payrate $20.45 per hour. The pay listed is the hourly range or the hourly rate for this position. A specific of...

1w ago

Go to Apply

Janitor Cleaner

ABM Industries • Wilton, CT • 1w ago

Manufacturing & Warehouse

1w ago

Go to Apply

Electro/Mechanical Assembler

JR Merritt Controls, Inc • Stratford, CT • 1w ago

Manufacturing & Warehouse

Location: Stratford, CT Employment Type: Full-Time As an Assembler, you will be responsible for building electro/mechanical sub-assemblies per specification within standard cycle times while maintaining quality requireme...

1w ago

Go to Apply

Warehouse

Adecco US, Inc. • Norwalk, CT • 2w ago

Manufacturing & Warehouse

Adecco is currently seeking a Warehouse - Shipping - Receiving Clerk for our Norwalk, CT client . $20hr - Temp-to-Hire Great opportunity for an experienced Warehouse - Shipping/Receiving Clerk to grow with this up and co...

2w ago

Go to Apply

Davenport Machinist III

MW Industries • Seymour, CT • 2w ago

Manufacturing & Warehouse

JOB SUMMARY: Responsible for the complex set up and operation of Davenport Machines to fabricate production parts that meet quality standards, and execute preventive and corrective maintenance. REPORTING TO: Production M...

2w ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.