Auto Mechanic Lead-MKE Airport $30hr

Menzies Aviation • Milwaukee, WI • 3h ago

Description

Responsible for leading and directing the activities of other GSE mechanics. Also does the work of a mechanic as required.

Location: General Mitchell International Airport

Schedule: 40 hours a week with two consecutive days off depending on the operational needs of the shop.

Pay Rate: $30.00 an hour

Required: Must possess mechanical tools and toolbox

MECHANICAL DUTIES

All duties listed under GSE 1,2 and 3.

Leadership Training

Advanced trouble shooting.

The ability to operate diagnostic equipment.

The ability to read schematics (electrical, air, hydraulic).

Verify that vehicles and equipment can pass appropriate safety inspections.

Maintain repair and service all aspects of all vehicles and equipment.

Determines the need and extent of repair work required on vehicles and equipment based on operator's reports and testing equipment.

Assist in instructing Mechanic 2 on work procedures applicable to their respective level.Inspects and approves work of Mechanic 2.

Performs other duties as assigned or requested.

Completes required documentation and performs data entry.

Lead GSE team in all aspects of GSE business group.

EQUIPMENT TYPES

All equipment @types listed under GSE 1 and 2

Ground power unit

AC/Heat cart

Airstart

Lower deck loader

Main deck loader

Hydrant cart (narrow and wide body)

Refuel tanker (all size and fuel @types)

Deicers

Cater truck

Hi lift truck

Hydrant truck

Towbarless push back

Transport trailer (fuel and cargo)

MINIMUM QUALIFICATIONS

Vocational/ Specialized Training.

Experience operating diagnostic equipment.

Certification from a recognized program, preferred.

5 years experience in automotive/ mechanical work.

Requires a Valid Driver's License.

Military Occupational Codes

Army 91B/91S; Airforce 2A6X2; Marine Corp GSE 6072 Mechanic, 6073 Mechanic/Electrician, 6074 Cryogenics/Mechanic, 6499 Mobile Facility Tech/ Generator Mechanic, Engineer Mechanic - 1341 Engine Equipment Mechanic, 3500 Motor T Tech, 3521 Auto Maintenance Tech, 3524 Fuel Mechanic, 2141 Assault Amphibious Vehicle Mechanic, 2147 Light Armored Vehicle Mechanic; Navy Rating Codes -AS Aviation Support (GSE), MM Machinist Mate, AD Aviation Machinist Mate, CM Construction Mechanic, EN Enginemen

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must frequently lift and/or move up to 25 pounds.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee regularly works in outside weather conditions.

The employee frequently works near moving mechanical parts and in high, precarious places and is frequently exposed to fumes or airborne particles, risk of electrical shock, and vibration. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually very loud.

EEO Statement

Menzies is an equal opportunity employer and makes employment decisions exclusively on the basis of merit. The Company prohibits unlawful discrimination based on race, color, creed, sex, religion, age, national origin or ancestry, citizenship, physical or mental disability, military or veteran status, marital status, medical condition, genetic information, sexual orientation, gender, gender expression or identity, or any other category protected by federal, state, or local law. All such discrimination is unlawful and all individuals employed by Menzies Aviation are prohibited from engaging in this @type of conduct. The Company further will make all employment decisions, including but not limited to, recruitment, hiring, promotion, retention, compensation, training, discipline and termination of employment decisions without regard to any characteristic protected by federal, state or local law.

Qualifications

Behaviors

Required

Innovative: Consistently introduces new ideas and demonstrates original thinking

Team Player: Works well as a member of a group

Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well

Leader: Inspires teammates to follow them

Motivations

Required

Self-Starter: Inspired to perform without outside help

Growth Opportunities: Inspired to perform well by the chance to take on more responsibility

Goal Completion: Inspired to perform well by the completion of tasks

Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

Education

Required

High School or better

Licenses & Certifications

Required

DRIVERS LICENSE

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.

Similar Jobs

Manufacturing Support General Labor

ACE PRECISION • Menomonee Falls, WI • 1h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Job Details Job Location Men Falls - Menomonee Falls, WI Position Type Full Time Job Shift 1st shift (M-F 7a-3:30p) Description JOB SUMMARY: Performs a variety of tasks to assist in production activitie...

1h ago

Go to Apply

1st Shift CNC Machinist

TRACE-A-MATIC CORP • Brookfield, WI • 2h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Are you ready to make an impact? Are you ready to be a part of a stable and growing organization perfect to grow yourself and your career? Then read on: At Trace-A-Matic we believe the people are our bi...

2h ago

Go to Apply

1st Shift CNC Machinist

MACHINING CONCEPTS • Germantown, WI • 2h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Are you looking for growth and a challenge in your CNC Career? You will be exposed to a variety of materials and being a job shop you never know what you will be making next. We are looking to add skill...

2h ago

Go to Apply

Experienced Mechanical Utilities

MEAD & HUNT INC • Milwaukee, WI • 3h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Mead & Hunt, a nationally recognized professional services consulting firm, is experiencing unprecedented growth. As a result, we have a full-time position available for an Experienced Mechanical/Ut...

3h ago

Go to Apply

Forklift Operator

WestRock Company • Germantown, WI • 4h ago

Manufacturing & Warehouse

Forklift Driver Starting Pay: $22.68 Shift: 2nd or 3rd Work Environment: Onsite, non-climate-controlled The opportunity: Forklift Drivers play a critical role in our production process. They are responsible for moving ma...

4h ago

Go to Apply

Warehouse Associate

RESTAURANT TECHNOLOGIES INC • Pewaukee, WI • 4h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Warehouse Associate Restaurant Technologies, the leading provider of highly innovative and value-enhancing bulk cooking oil management services to the food service industry, is currently seeking a Wareh...

4h ago

Go to Apply

2nd Shift CNC Machinist

TRACE-A-MATIC CORP • Brookfield, WI • 12h ago

Manufacturing & Warehouse

12h ago

Go to Apply

2nd Shift CNC Machinist

MACHINING CONCEPTS • Germantown, WI • 12h ago

Manufacturing & Warehouse

12h ago

Go to Apply

3rd Shift Machine Operators

ManpowerGroup • Waukesha, WI • 12h ago

Manufacturing & Warehouse

3rd Shift Entry Level Automotive Machine Operator - Pay Rate $18/hr. Our client in Waukesha, WI is looking for hardworking, motivated talent to join their team. Entry Level, safety minded and diverse work environment. Do...

12h ago

Go to Apply

Warehouse Associate

Crescent Electric Supply Co • Racine, WI • 18h ago

Manufacturing & Warehouse

JOB REQUIREMENTS: Pay Details: Earn up to \$22 per hour plus a shift differential of \$1.25 per hour Shift Available: Monday - Friday from 12:00 pm - 8:30 pm Work Location: 2525 Enterprise Drive, Sturtevant, WI (Racine D...

18h ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.