Aircraft QC Inspector II (CH-47 Technical Inspector) Lexington Oklahoma

Amentum • Lexington, OK • 2d ago

The Aircraft QC Inspector (CH-47 Technical Inspector)

Inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty.

Inspects removal and installation aircraft subsystem assemblies such as engines, rotors, gearboxes, transmissions, mechanical flight controls and their components.

Performs scheduled and special inspections.

Inspects and performs limited maintenance operational checks and assists in diagnosing and troubleshooting aircraft subsystems using special tools and equipment as required.

Inspects forms and records related to aircraft maintenance.

Inspects defective parts of the aircraft.

Plans, conducts, and supervises aircraft technical inspections, including repairs and modifications to aircraft structures, structural components and engines.

Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions.

Participates in maintenance test-flights and operation checks as required.

Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration.

Performs additional duties, including maintenance duties, as requested.

Adheres to company policies and safety programs (Safety-first mentality).

Minimum Requirements

High School Diploma or equivalent is required.

U.S. military technical school or specialized training course is desired; certification of education level is required.

Valid up-to-date A&P license with IA (preferred )

Shall have five years' aviation maintenance experience, five years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All Mechanic experience must be within the six most recent years.

Shall have five years of recent applicable aircraft maintenance experience. Shall have at least one year's experience inspecting MDS aircraft assigned. All Inspector experience must be within the ten most recent years. Back shop TI shall have at least one year's experience on components being inspected.

Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P) (preferred).

Valid Driver's License.

Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection.

If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20.

Clearance Requirements

Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.

Knowledge & Skills

Thorough knowledge of aircraft systems on the assigned MDS.

Advanced knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC).

Advanced knowledge of technical publications and Logistics Information Systems.

Able to prioritize workloads to maintain schedules on assigned projects

Possess the level of experience to inspect all required aeronautical-@type maintenance to be performed by aircraft mechanics.

The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.

Exceptional communication skills, leadership abilities, and personnel management skills are required.

Ability to communicate effectively, both verbally and in writing.

Physical Requirements/Working Environment

Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.

Must be able to climb stairs, ramps, ladders, and work stands.

Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.

May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds.

Must be able to @type using a standard keyboard to communicate through e-mail and various software applications.

Will handle dirty parts and lubricants.

Will be required to wear proper Personal Protective Equipment (PPE).

Must be able to pass a Respirator Physical and Fit Test qualification.

May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.

May work in maintenance shop or outside.

Must be able to work in a shop where the environment is drafty, noisy, and dirty.

May be exposed to extreme noise from operating equipment.

May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.

May be expected to work in austere environments and all-weather conditions.

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs) .

Amentum

Go to Apply

Share this job

Similar Jobs

Refrigeration Technician

Aerotek • Norman, OK • 1w ago

IT & Engineering

Refrigeration Technician Location: Norman, Oklahoma Type: Full-Time, Permanent Schedule: 1st Shift + On-Call Availability Sign-On Bonus Available Company Vehicle Provided Day One Ready to take your refrigeration career t...

1w ago

Go to Apply

Material Handling Equipment Technician I

Sysco • Norman, OK • 4w ago

IT & Engineering

Skip to main content ( https://wd5-impl.workday.com/sysco5/d/inst/1$17/219$1283.htmld ) Implementation - sysco5 Edit Job Profile Material Handling Equipment Technician I - OPCO - US Actions Profile Details Effective Date...

4w ago

Go to Apply

Sr. Supply Chain Business Ops. Control Account Manager (CAM)

Northrop Grumman • Tribbey, OK • 7h ago

Management & Administrative

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: None TRAVEL: Yes, 25% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems th...

7h ago

Go to Apply

Industrial Client Service Leader - Industrial Water and Wastewater

CDM Smith • Norman, OK • 13h ago

Legal & Paralegal

43167BR Requisition ID: 43167BR Business Unit: IND Job Description: This position can be based in any of our CDM Smith offices * CDM Smith is seeking an Industrial Client Service Leader with a strong industrial water and...

13h ago

Go to Apply

Assistant Manager - Retail

Love's Travel Stops & Country Stores • Pauls Valley, OK • 2d ago

Retail & Hospitality

Benefits: ? Fuel Your Growth with Love's - company funded tuition assistance Paid Time Off Flexible Scheduling 401(k) - 100% match up to 5% Medical/Dental/Vision Insurance after 30-days Competitive Pay Career Development...

2d ago

Go to Apply

(USA) Carwash/Gas Attendant

Walmart • Moore, OK • 2d ago

Position Summary... What you'll do... Communicates and explains Membership @types programs and benefits to current and prospective Members to assist with account decisions build Membership levels encourage renewals commu...

2d ago

Go to Apply

Shipping Coordinator (Lab Expr)

Actalent • Norman, OK • 3d ago

Manufacturing & Warehouse

Urgent hiring for "Lab Technician" in Oklahoma City, OK ! ?Must be located closer to Oklahoma City, OK Job Description: Process and package allergens for shipment. Ensure all items are packaged according to company stand...

3d ago

Go to Apply

Shift Supervisor Trainee

CVS Health • Norman, OK • 4d ago

At CVS Health, we're building a world of health around every consumer and surrounding ourselves with dedicated colleagues who are passionate about transforming health care. As the nation's leading health solutions compan...

4d ago

Go to Apply

Mechanical Engineer 5(Industrial/Process)

CDM Smith • Norman, OK • 5d ago

Legal & Paralegal

43061BR Requisition ID: 43061BR Business Unit: IND Job Description: With general direction, creates engineering designs including: Reviews draft designs for compliance with federal, state and local regulations and signs...

5d ago

Go to Apply

Customer Service Associate

Walgreens • Purcell, OK • 6d ago

Management & Administrative

Job Description: Models and delivers a distinctive and delightful customer experience. Registers sales on assigned cash register, provides customers with courteous, fair, friendly, and efficient checkout service. Custome...

6d ago

Go to Apply

Subscribe to get new jobs sent directly to you
(no charge, cancel anytime)

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.