Applicants must have an Active Top Secret/SCI US Government clearance with polygraph. Note: US Citizenship is required to maintain a Top Secret/SCI clearance with polygraph.
Working supervisor of contractor personnel, is also responsible for assisting with the purchasing of parts and services required to maintain fleet, MHE and warehouse equipment; coordinating the establishment of work priorities and setting repair schedules; maintaining a preventative maintenance program for vehicles and warehouse material handling equipment; providing technical assistance on complex repair problems; and preparing written estimates of repairs and costs.
Duties/Tasks and Responsibilities
The contractor shall coordinate maintenance activities, provide technical direction and supervision to developmental and full performance contractor Warehouse Mechanics including but not limited to the following:
Coordinate with government staff focal point for approval of maintenance prioritization, levels of funding available, and office coverage of mechanics and or other technical personnel.
Schedule, prioritize, inspect, approve/disapprove, monitor, and evaluate the work of developmental and full performance contractor Warehouse Mechanics.
Determines, within prescribed value range, when a major component/ assembly is to be replaced, repaired, rebuilt or discarded; responsible for assisting with the purchasing of parts and services required to maintain fleet and training vehicles; and prepares written estimates on cost and labor time for corrective repairs.
Maintain a preventative maintenance program for vehicles and equipment; determining the service intervals and procedures.
Track all sponsor vehicle mileage, preventative maintenance schedules, parts stored in shop, service records, replacement vehicles, and to provide regular status updates to sponsor management as requested.
Provide technical advice and assistance to developmental and full performance mechanics and others on either new or difficult and complex jobs.
Conduct repairs and/or provides consultative services for the Sponsor to source vendor repair locations CONUS, order replacement trucks, recommend vehicle specifications to meet the sponsor's needs, and recommend parts and equipment to ensure they are safe and dependable.
Warehouse Mechanic may be required to travel within a 2-hour radius to conduct repairs, visit vendors for consultative services, conducts periodic vehicle inspections at the vendor's facility throughout the vehicle build processor, and to provide vehicle transportation to and from vendor locations for service.
Interacts with customers to keep them informed of status of vehicles, repairs needed, etc. Based on assignment, independently performs corrective maintenance and repairs to fleet, training, emergency or heavy equipment vehicles.
Inspects, diagnoses and isolates vehicle and equipment malfunctions; troubleshoots, traces and locates defects and/or causes of mechanical problems to determine @type and extent of necessary repairs.
Utilize on-board computer diagnostic systems and other test equipment in order to test automotive computer control and emission systems; assesses and analyzes malfunctions of machinery using microcomputers, calipers, gauges, and other equipment.
Professionally interact with government point(s) of contact (GPOC) and customers to keep them informed of status of vehicles and repairs needed.
Perform preventative maintenance and repairs to fleet, emergency, training or heavy equipment vehicles.
Serves as a non-voting member on the Accident Review Council to provide SME expertise.
Safely and properly operate wheel balancing equipment, and turning and grinding equipment for servicing brake drums and discs, and rotor assemblies.
Perform engine tune-ups, setting engine timing according to specifications.
Transport vehicles to approved facilities to obtain State vehicle safety and emission inspections on Sponsor owned vehicles.
Based on assignment, performs administrative and other functions as related to wheeled vehicle and equipment maintenance.
Perform warehouse maintenance on various equipment including, but not limited to: door/gate repairs, rack installations and repairs, fabrication of parts (i.e., machining, welding, and repair of warehouse equipment), fabrication/welding of parts, minor electrical/plumbing, cage/fencing repairs, custom Sponsor specific in-house projects.
Perform Material Handling Equipment maintenance including, but not limited to: service and repair warehouse packing equipment (i.e., table saws, radial saws, conveyor systems, banders, stitchers, dust collectors, nailers, air compressors, air lines, box making machine), and maintenance to vertical storage machines, shredders, lift and dump equipment.
Identify necessary parts, equipment and supplies needed to complete repair or preventative check.
Responds to emergency road calls for disabled Sponsor vehicles and makes minor adjustments or has the vehicle towed for back to the Sponsors location for repairs.
Requires a Class A Commercial Driver's License (with "P" endorsement).
Road test vehicles as needed to verify maintenance/repair work.
Promptly respond to emails and telephone calls.
Ensure the necessary provision of vehicles and support for customers.
Perform other related duties as required or as directed by government staff management.
Maintain a highly organized, clean, and efficient maintenance shop on a Sponsor facility.
Comply with all OSHA regulations regarding waste disposal as well as adherence to shop standard operating procedures.
Make recommendations to government staff management regarding shop standard operating procedures and implement when approved.
Other duties as assigned.
Knowledge, Skills, and Abilities
The contractor shall possess, or obtain as specified, the following KSAs:
Extensive knowledge of the operating systems used in motor vehicles.
Extensive knowledge of the practices and tools used in the maintenance and diagnostics of vehicles and equipment.
Considerable knowledge of computer, electrical, transistorized and other non-mechanical systems and how they tie-in with and affect the operation of mechanical systems.
Considerable knowledge of the full range of tools, equipment, test procedures and practices used in the repair and preventative maintenance of fleet, MHE, and other general equipment.
Possess excellent interpersonal and customer service skills.
Working knowledge of computers, familiar with MS Office Suite to include Word, Excel, and Access, and be comfortable with working in various databases relevant to maintenance.
Experience diagnosing complex mechanical and related malfunctions.
Experience organizing and reading technical manuals, references and specifications and service and recall bulletins.
Communication skills necessary to write routine correspondences, maintenance logs and order forms.
Understanding of how to operate a forklift, power tools, wrenches, diagnostic equipment, and jacks.
Time management skills to prioritize and schedule multiple work requirements.
Interpersonal skills to interact in a professional manner with Sponsor's outside vendors.
Working knowledge of diesel mechanics.
Ability to fabricate simple parts and to weld simple parts.
Must possess a Class A Commercial Driver's License with all endorsements.
Must obtain forklift certification within 60 days.
Work Environment
The work is usually performed inside on concrete surfaces where there is exposure to drafts, noise, and fumes from vehicles. Warehouse Mechanic - Senior occasionally perform work outside under adverse weather conditions. They are continually exposed to dirt, dust, and grease, and to the potential for burns, chemical irritations, shocks, bruises, cuts, and strains. To reduce dangers and irritations from these conditions, they follow prescribed safety practices and use safety equipment such as safety shoes and glasses, and respirators.
Minimum Qualifications
Active TS/SCI Clearance with Polygraph
Experience:
Ten years (10) of experience in the problem diagnosis, repair and maintenance of a wide variety of light,
medium, heavy and/or specialized automotive equipment and other heavy equipment.
Education:
High school Diploma or GED equivalent.
Special Certifications:
Virginia Safety State Inspection Certificate
Virginia Emission Inspections Certificate
Air Conditioning Certification
Class A Commercial Driver's License
Certified Diesel Mechanic/ Certification in Heavy Fleet/Trucks
Obtain and maintain a valid Forklift Operator's certificate
ASE certification (provide to COTR or Government Task Manager (GTM) within 30-days of employment)
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (https://postings.govdocs.com/#/vxSkbztPuAwwxfs) .
